Determination of Organochlorine Pesticides in Sediments from Authie Bay Using Microwave Assisted Solvent Extraction

The aim of this study was to develop an analytical method to determine the organochlorine concentrations in sediments. Combination of Microwave assisted Solvent Extraction (MASE) and capillary gas chromatography with specific detection (electron capture detector) was a viable approach for the determination of pesticides in solid matrixes. In this study, MASE development was focused on the selection of a suitable extraction solvent for all the target analytes. MASE procedure was validated by comparison with conventional methods such as Soxhlet and sonication extraction. The proposed method was then applied to determine the organochlorine insecticides concentrations in samples from Authie Bay (France). Environmental water samples were analysed and five target analytes were detected in concentrations from 0.03 to 0.56 ng/g of dry sediment. These investigations showed the accumulation and the persistency of these products in sediments in spite of the fact they were banned a few decades ago.     

Determination of uranium in solution at the ng 1−1 level by time-resolved laser-induced spectrofluorimetry: application to geological samples

Time-resolved laser-induced spectrofluorimetry was used for the determination of uranium at the ng 1^?1 level in alkaline water with high chloride and sulphide contents in order to obtain a better understanding of uranium mobilization under natural reducing conditions. The optimum complexing medium, limit of detection and results obtained for several waters from different localities in the Pyrenees are presented. These data seem to confirm that even at very low uranium concentrations, thermodynamic control by a mineral phase takes place.     

鲁米诺-双氧水-铬(Ⅲ)化学发光体系测定化探样品中痕量砷

用鲁米诺－双氧水－铬（Ⅲ）化学发光体系结合巯基棉对Ａｓ（Ⅲ）的富集分离，建立了快速的测定化探样品中痕量砷的新方法，检测线性范围为１．０×１０－４～１．０×１０１ｍｇ／Ｌ，检出限为３．４×１０－５ｍｇ／Ｌ。用于实际化探样品测定，相对标准偏差为５．５％～９．０％。     

The lion and man problem revisited

A pursuerP, whose speed is bounded by 1, wants to get closer to an evaderE, whose speed is bounded by >1.P wants to reduce his distancePE fromE below the capture radius . Both players are confined to a circular arena. This problem is equivalent to a problem discussed by Flynn, who characterized and gave numerical bounds to the least upper boundd* on the values ofPE thatE can maintain. He used direct methods and did not use Isaacs' theory.We solve our problem relying on the theory of singular surfaces in differential games. We construct and investigate barriers of the game of kind, and we replace Flynn's bounds ond* by analytical (exact) values for various speeds .The support of the TW Department of THT, Enschede, Holland, is gratefully acknowledged.     

On the initial layer solution of the Boltzmann equation with small Knudsen number

We extend our method of systematic removal of secular terms in a singular perturbation treatment of the Boltzmann equation with small Knudsen numbers to the initial layer. The requirement that the solution through the initial layer should connect smoothly to the normal solution removes an ambiguity noted in our previous paper. We show that removal of secular terms improves Grad's solution for the initial layer and reintroduces soundlike modes associated with higher moments, first found by Wang Chang and Uhlenbeck.     

Determination of L-Dopa and L-Dopamine in Aqueous Solutions Using In-Loop SPME Coupled with LC

A new in-loop solid-phase microextraction (in-loop-SPME) technique, based on an aluminum capillary tube coupled to HPLC, is described for on-line isolation, concentration, and analysis of analytes from aqueous samples. L-Dopa and L-dopamine, in aqueous solutions, were selected as model compounds. The main conditions affecting extraction of the analytes from aqueous samples, desorption, injection, and chromatographic separation were investigated. The method is simple and reproducible. Using the proposed method, reliable determination of L-dopa and L-dopamine at parts-per-billion concentrations was achieved. The calibration plots were linear in the range of 2.5–1500 ng mL⁻¹ with correlation coefficients of 0.999 and 0.998 for L-dopa and L-dopamine, respectively. The detection limits were 0.5–1 ng mL⁻¹ with a relative standard deviation less than 4.1%. Concentration factors more than 100-fold were obtained for these compounds.     

Determination of organotin compounds in biological samples using accelerated solvent extraction,sodium tetraethylborate ethylation,and multicapillary gas chromatography–flame photometric detection

A method has been developed for species-selective analysis of organotin compounds in solid, biological samples. The procedure is based on accelerated solvent extraction (ASE) of analytes and includes extraction of the tin species with a methanol–water (90% methanol) solution of acetic acid/sodium acetate containing tropolone (0.03% w/v), their ethylation with NaBEt₄, and separation and detection by GC–FPD. The analytical procedure was optimized with an unspiked sample of harbor porpoise (Phocoena phocoena) liver. Effects of ASE operational variables (extraction temperature and pressure, solvent composition, number of static extraction steps) are discussed. Method detection limits (MDL) were in the range 6–10 ng(Sn) g^–1 dry weight and 7–17 ng(Sn) g^–1 dry weight for butyl- and phenyltin compounds, respectively. Recoveries were comparable with or better than those obtained by use of other procedures reported in the literature. The analytical procedure was validated by analysis of NIES No. 11 (fish tissue) certified reference material.     

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals in environmental samples

Mesoporous titanium dioxide as a novel solid-phase extraction material for flow injection micro-column preconcentration on-line coupled with ICP-OES determination of trace metals (Co, Cd, Cr, Cu, Mn, Ni, V, Ce, Dy, Eu, La and Yb) in environmental samples was described. Possessing a high adsorption capacity towards the metal ions, mesoporous titanium dioxide has found to be of great potential as an adsorbent for the preconcentration of trace metal ions in samples with complicated matrix. The experimental parameters including pH, sample flow rate, volume, elution and interfering ions on the recovery of the target analytes were investigated, and the optimal experimental conditions were established. Under the optimized operating conditions, a preconcentration time of 90 s and elution time of 18 s with enrichment factor of 10 and sampling frequency of 20 h⁻¹ were obtained. The detection limits of this method for the target elements were between 0.03 and 0.36 μg L⁻¹, and the relative standard deviations (R.S.D.s) were found to be less than 6.0% (n =7, c =5 ng mL⁻¹). The proposed method was validated using a certified reference material, and has been successfully applied for the determination of the afore mentioned trace metals in natural water samples and coal fly ash with satisfactory results.     

Comparison of adsorbents for on-line solid-phase extraction of polycyclic aromatic hydrocarbons before liquid chromatography with UV detection

Summary On-line solid-phase extraction (SPE) coupled with reversed-phase liquid chromatography and UV detection at 254 nm has been used for the determination of trace-level polycyclic aromatic hydrocarbons (PAH) in soil extracts. Five commercially available adsorbents (C₈, C₁₈, PLRP-S, PRP-1, and Bond-Elut Env) were evaluated. Results showed that recovery of the PAH decreased with increasing molecular weight, because of their poorer solubility. Recovery of high-molecular-weight PAH was significantly improved by addition of 10% (v/v) acetonitrile to the sample before loading of the SPE adsorbent. PAH recovery ranged from 64.0 to 108% when a 50 mL sample spiked with 1 μg L⁻¹ was applied to these adsorbents. Determination of PAH was possible with detection limits below 0.05 μg L⁻¹, which corresponds to 0.2 μg kg⁻¹ soil. The method was successfully used to determine PAH in soil extracts.     

A novel method of the separation/preconcentration and determination of trace molybdenum(VI) in water samples using microcrystalline triphenylmethane loaded with salicyl fluorone

It is the first time that triphenylmethane was used as an adsorbent to preconcentrate and separate trace amount of molybdenum in water samples. The effects of different parameters, such as acidity, stirring time and various metal ions, the amounts of triphenylmethane and salicyl fluorine, etc. on the enrichment yield of molybdenum have been studied to optimize the experimental conditions. Under the optimum conditions, molybdenum can be adsorbed on the surface of microcrystalline triphenylmethane loaded with salicyl fluorone by the intermolecular action strength. The possible reaction mechanism for the enrichment of molybdenum was discussed in detail in this paper. Mo(VI) can be completely separated from Pb(II), Co(II), Cu(II), Cr(III), Ni(II), Hg(II), Zn(II), Cd(II), Fe(III) and Al(III) in the solution. The proposed method was successfully applied to the determination of trace amount of molybdenum in various water samples by spectrophotometry after preconcentration using microcrystalline triphenylmethane. The preconcentration factor is from 83 (500 ml water sample was enriched to 6.0 ml) to 166 (1000 ml water sample was enriched to 6.0 ml). The detection limit is 1.3 × 10⁻⁵ mg l⁻¹ and the linearity is maintained in the concentration range 3.8 × 10⁻³ to 0.36 mg l⁻¹ with a correlation coefficient of 0.9998. The recoveries are in the range of 93.5-104%. The relative standard deviation is 1.8-2.9%. Analytical results obtained with this novel method are very satisfactory.