涡流型切割磁铁的理论分析和模拟计算

从理论上推导了涡流型切割磁铁的漏场变化规律.以上海同步辐射装置(SSRF)用涡流型切割磁铁为例,进行了分析性计算和讨论,并与OPERA程序模拟计算的结果进行了比较.在此基础上,提出了降低漏场的方法和措施.     

新一代永磁型磁共振成像系统及其医学应用

简述了世界磁共振成像技术的发展趋势,分析了永磁型共振成像系统的常见不足及其产生的物理原因,据此,提出了解决这些问题的方法,同时,介绍了解决这些问题之后开发出的新一代永磁型磁振成像系统Ｏｐｅｎ Ｍａｒｋ２０００的特点及其在医学上的应用。     

ECR离子源六极永磁体的设计研究

分别从材料、结构、尺寸等方面全面地研究了Halbach结构六极永磁铁的设计方法.针对个别磁块可能存在的退磁问题给出了相应的解决方案.通过优化结构,使六极磁铁在离子源等离子体弧腔内壁产生的磁场达到最大.用POISSON,PERMAG,TOSCA等多个磁场模拟程序计算模拟了六极磁场的大小与分布,并给出了一些相应的曲线     

直接冷却的高温超导磁体热稳定性有限元仿真

制冷机直接冷却超导磁体是一门新兴技术,研究超导磁体在直接冷却下的热稳定性具有重要意义。用有限元方法解决复杂边界问题的热力学问题非常有效,而有限元分析软件ANSYS能使得用有限元法解决问题更加方便。该文用有限元方法对直接冷却高温超导磁体进行了热稳定性数值仿真。仿真结果表明,在设定热负荷作用下,直接冷却的B i2223系高温超导磁体具有较好的热稳定性,磁体温度低于其临界温度。     

Magnetic properties of YCo5 (70%wt)+Y2Co17 (30%wt) nanocomposite powders at low temperatures

Nanostructured YCo₅ (70%wt)+Y₂Co₁₇ (30%wt) composite powders were prepared by mechanical milling and subsequent annealing at 1073 K for 1.5 min. The average grain size D of the YCo₅ and Y₂Co₁₇ phases, obtained from XRD data, was 14 and 12 nm, respectively. The temperature dependence of the magnetic properties was studied by DC magnetization measurements at temperatures T ranging from 3 to 300 K. Hysteresis loops (H_max=70 kOe) show that both the coercivity H_C and the squareness σ_r/σ_max are temperature-dependent. The coercivity increases from 12 kOe at room temperature to 18 kOe at T=3 K. The observed enhanced remanence (σ_r/σ_max>0.5) indicates that a strong exchange coupling is present at all temperatures used in this study. The maximum magnetization σ_max changes little with temperature and has a value of about 70% of the effective saturation magnetization of the title compound.     

Long Pulse Operation of the THz Gyrotron with a Pulse Magnet

Long pulse operation up to 1 msec of a high frequency gyrotron with a pulse magnet has been successfully carried out in a frequency range including 1 THz. In the experiments, the timing of an electron beam pulse injection is adjusted at the top of the magnetic field pulse, where the variation of field intensity is negligible. The operation cavity modes seem to be TE_{1, 12} and TE_4,12 at the second harmonics. The corresponding frequencies are 903 GHz and 1,013 GHz, respectively. Additionally several features of radiation measurement results of the gyrotron are described and brief considerations are presented.     

Spin Parity Effect on Magnetic Relaxation by Quantum Tunneling in Nanomagnets

Spin parity effect on magnetic relaxation by quantum tunneling in the biaxial spin model is studied by taking into account the transverse local stray field. It is shown that the square root time dependence in the even resonance occurs in the presence of a distribution of transverse anisotropic parameters, while the odd resonance always shows exponential relaxation. Magnetic relaxation under a sweeping field is also studied. The variation of the relaxation curve with the increasing distribution width of the local stray field for even resonance is qualitatively different from that of the odd resonance. The theoretical result on even resonance is in agreement with experimental results on Fe8 system, while the prediction for odd resonance awaits the experimental verification.     

Effect of permanent magnet configuration on discharge characteristics in cylindrical Hall thrusters

Magnetic field design is important in cylindrical Hall thrusters and using permanent magnets to generate magnetic field is very promising in the future. In two typical permanent magnet configurations (i.e., ring and cylindrical configurations) of cylindrical Hall thrusters, discharge characteristics are compared in this paper through the experiments and simulations. The study shows that the cylindrical configuration can bring about higher thruster performance in the same working condition. The reason is that the potential drop of the cylindrical configuration is mainly concentrated in the channel, which is beneficial for the electrons to obtain energy to promote the ionization of the propellant. However, the voltage regulation range of the cylindrical configuration is lower because the anode is more easily overheated.     

Observation of the exchange spring behavior in hard-soft-ferrite nanocomposite

Nanocomposite of hard (BaFe₁₂O₁₉) and soft ferrite (Ni_0.8Zn_0.2Fe₂O₄) are prepared by the mixing of the individual ferrite components at appropriate ratio and subsequent heat treatment. Initially the microstructure of the individual phases is controlled by suitable processing. We have observed the exchange spring behavior in the soft-hard ferrite composite for the first time by tailoring the particle size of the individual phases and by suitable thermal treatment of the composite. It is found that the exchange interaction dominates over the dipolar interaction for smaller particle sizes of the soft ferrite. The magnetization of the composite showed hysteresis loop that is characteristic of the exchange spring system. This gives experimental proof for some theoretical modeling as well as paves way for developing magnet with higher (BH)_max product based on ferrites.