反应性乳化剂存在下的五元苯丙乳液共聚合

采用反应性乳化剂SE-10N,通过正交实验及单因素实验确定了以苯乙烯、甲基丙烯酸甲酯、丙烯酸丁酯、丙烯酸和丙烯腈为单体的五元无皂苯丙共聚乳液的组成及聚合工艺。所制得的无皂乳液稳定,其乳胶粒大小均匀,粒径为50~60nm,比同组成的有皂乳液乳胶粒的粒径稍小。乳液涂膜透明、硬度达H级;其硬度、耐水性及钙离子稳定性均较同组成有皂乳液的好。     

Synthesis of water-soluble hyperbranched polymer and its application in acrylic latex

A water-soluble hyperbranched polymer (WHBP), obtained from a second generation of hyperbranched polyester and maleic anhydride, was studied. Its effects on the properties of acrylic latexes, which were based on emulsion polymerization of butyl acrylate (BA), methyl methacrylate (MMA), acrylic acid (AA) and WHBP, and latex film were discussed. The characteristics of WHBP were determined by nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared (FTIR) and gel permeation chromatography (GPC). Particle size and morphology of latex particles were confirmed by dynamic light scattering (DLS) and transmission electron microscope (TEM). The investigation showed that WHBP could be used in emulsion polymerization, and that latex of poly(BA-MMA-WHBP) was more stable than that of poly(BA-MMA-AA). The hardness of latex film increased from 2B to HB when WHBP was used.     

Fabrication of core/shell hybrid organic–inorganic polymer microspheres via Pickering emulsion polymerization using laponite nanoparticles

Oil-in-water (o/w) emulsions of styrene, as monomer oil in water, were achieved successfully via Pickering emulsification with laponite nanoparticles as the sole inorganic stabilizers. The formed emulsions showed excellent stability not only against droplets coalescence (before polymerization) but also against microparticles coagulation (after polymerization). Generally, the number of composite polystyrene microparticles (PS) increased and their sizes decreased with the content of solid nanoparticles used in stabilizing the precursor o/w emulsions. This is consistent with the formation of rigid layer(s) of the inorganic nanoparticles around the PS microparticles thus a better stability was achieved. The composite microparticles were characterized using various techniques such as surface charge, stability, transmission electron microscope (TEM), scanning electron microscope (SEM) and Fourier transform infra-red (FT-IR). Coating films of the prepared latexes were applied to flat glass surfaces and showed reasonable adhesion compared to PS latex particles prepared with conventional surfactants. The effect of employed conditions on the features of the resulting emulsions in terms of stability and particle size has been discussed.     

Role of Divalent Metals in Polymer Degradation

The role of divalent metals in the degradation of the physico-mechanical properties of radiation-vulcanized natural rubber latex (RVNRL) films was investigated. RVNRL films were prepared by the addition of metals (Cu, Mg, etc.) of different concentrations (0–30ppm) to natural rubber latex and irradiated with various radiation doses (0–20kGy). The radiation doses were optimized (12kGy), and the adverse effect of metal ions was studied against a reference film prepared with no metal ions. Tensile strength, tear strength, and cross-linking density of the irradiated rubber films decreased with increasing metal ion concentrations and decreasing radiation doses. The mechanical properties of the films were reduced by 10–15% for 30ppm metal ions and at the optimum dose. In contrast, elongation at break, permanent set, and swelling ratio of the films increased at the same conditions. The relative effect of metal ions can be explained by the classical electron concept, reported in this article.     

Blending of Natural Rubber/Recycled Ethylene-Propylene-diene Rubber: Promoting the Interfacial Adhesion Between Phases by Natural Rubber Latex

This article deals with blends based on natural rubber (NR) and recycled ethylene-propylene-diene rubber (R-EPDM). Natural rubber latex (NRL) was introduced into the blends to enhance interfacial adhesion between NR and R-EPDM. A new route of compounding was also suggested. The blends were prepared by mixing R-EPDM and other additives in NRL before blending with natural rubber on a two-roll mill. By applying this method, the homogeneity of the blends and cross-linking distribution are significantly improved. The blends exhibited superior state of cure, swelling resistance, mechanical properties and dynamic mechanical properties. The degree of entanglement between NR and R-EPDM also increased after NRL modification.     

PMMA/P(AN-MMA)纳米复合粒子的制备与形貌表征

采用种子乳液聚合的方法制备PMMA／P(AN-MMA)纳米复合粒子,在第二阶段聚合过程中分别采用水溶性引发剂、油溶性引发剂以及氧化还原引发体系,通过透射电子显微镜(TEM)来观察复合乳胶粒子的形态结构,得到的PMMA／P(AN-MMA)纳米复合粒子为半球形结构,与热力学理论预测结果一致。     

聚苯乙烯乳胶球三维有序体的制备及其显微形貌表征

A three-dimensional (3D) ordered structure was achieved by self-organization of monodisperse polystyrene latex about 250nm in diameter after being ambient dried. The stacked morphology was investigated by scanning electron microscopy(SEM) observation. It is shown that the face-centered cubic(FCC) phase dominantly exists. This finding presents a potential template for preparing an inverse FCC structure as a photonic crystal of full band gap if the index contrast is higher than 2.8.     

Thermal Emulsion Polymerization without any Conventional Initiators and Emulsifiers

Stable poly(styrene-co-sodium styrene sulfonate) (P(St-NaSS) nanoparticles with broader size distribution were synthesized by thermal emulsion polymerization without any conventional initiators and emulsifiers. The obtained polymer nanoparticles have higher ξ potential, and the particle sizes have broad distribution. The stability of polymer particles originated from the addition of small amounts of ionic comonomer, NaSS, which can act as an emulsifier in somewhat. The monomer conversion could reach up to about 28 wt% in 48 h, and did not increase by further polymerization when higher polymerization temperature (120 ℃) was employed. This polymerization system may be give some further understand for mechanism of emulsion polymerization.     

Dual-Phase structure of polymer electrolytes comprised of NBR/SBR latex films swollen with lithium salt solution

Dual-phase polymer electrolytes (DPE) that have high ionic conductivity (> 10^?3 S/cm) and good mechanical strength were prepared by mixing NBR and SBR latices and casting films. The latex films absorbed large quantities of lithium salt solution (e.g., 1M lithium perchlorate in γ-butyrolactone) to obtain DPE films but did not dissolve with swelling. The NBR phase is polar and was impregnated selectively with the polar lithium salt solution, whereas the SBR phase is nonpolar and formed a mechanically-supportive matrix. Transmission electron microscopic (TEM), electron energy loss spectral (EELS), and energy-dispersive x-ray (EDX) analyses showed microscopically the dual-phase structure. Evidence for swelling by lithium salt solution was found only in the NBR phase and not in the SBR phase by EDX microanalysis. Ionic conductivity as a function of NBR content or swelling degree showed clearly that a percolation threshold for ionic conductivity exists. © 1994 John Wiley & Sons, Inc.     

自交联型丙烯酸酯共聚物乳液的研究

以羟甲基丙烯酰胺、丙烯酸作为活性单体，采用种子乳液聚合法制得四元体系自交联型丙烯酸酯共聚物乳液。用透射电镜观察了乳胶粒的微观形态，并对共聚物乳液的流变性，稳定性等进行了测试，考察了羟甲基丙烯酰胺和丙烯酸的含量、聚合方式对共聚物乳液性能的影响。