Organic-inorganic hybrid superhydrophobic surfaces using methyltriethoxysilane and tetraethoxysilane sol-gel derived materials in emulsion

By applying alkaline-catalyzed co-hydrolysis and copolycondensation reactions of tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES) in organic siloxane modified polyacrylate emulsion (OSPA emulsion), we are able to demonstrate the potential for developing a sol-gel derived organic-inorganic hybrid emulsion for a superhydrophobic surface research. TEOS and MTES derived sol-gel moieties can be designed for a physical roughness and hydrophobic characteristic (Si-CH₃) of the hybrid superhydrophobic surface, while OSPA emulsion can be endowed for good film-forming property. The effect of formulation parameters on superhydrophobicity and film-forming property was analyzed. The water contact angle (WCA) on the sol-gel derived hybrid film is determined to be 156°, and the contact angle hysteresis is 5° by keeping the mole ratio of TEOS:MTES:C₂H₅OH:NH₃·H₂O:AMP-95 at 1:4:30:10:0.63 and the mass percentage of OSPA emulsion at 25%. The nanoparticle-based silica rough surface is observed as the mole ratio of MTES/TEOS at 4:1. The sol-gel derived organic-inorganic hybrid emulsion shows remarkable film-forming property when the mole ratio of MTES/TEOS reaches or exceeds 4:1. With the primer coating, the performance of superhydrophobic film achieve actual use standard. It reveals that this new procedure is an effective shortcut to obtain a superhydrophobic surface with potential applications.     

Theoretical study of cisplatin adsorption on silica

The adsorption of cisplatin and its complexes, cis-[PtCl(NH₃)₂]⁺ and cis-[Pt(NH₃)₂]²⁺, on a SiO₂(1 1 1) hydrated surface has been studied by the Atom Superposition and Electron Delocalization method. The adiabatic energy curves for the adsorption of the drug and its products on the delivery system were considered. The electronic structure and bonding analysis were also performed. The molecule-surface interactions are formed at expenses of the OH surface bonds. The more important interactions are the Cl-H bond for cis-[PtCl₂(NH₃)₂] and cis-[PtCl(NH₃)₂]⁺ adsorptions, and the Pt-O interaction for cis-[Pt(NH₃)₂]²⁺ adsorption. The Cl p orbitals and Pt s, p y d orbitals of the molecule and its complexes, and the s H orbital and, the s and p orbitals of the O atoms of the hydrated surface are the main contribution to the surface bonds.     

溶胶-凝胶法制备纳米多孔SiO2薄膜

以正硅酸乙酯(TEOS)为原料，采用旋转涂敷的方法，结合溶胶-凝胶技术在硅衬底上制备超低介电常数多孔SiO₂薄膜.采用两种不同的改性方法对薄膜表面进行改性，傅里 叶变换红外光谱分析发现改性后薄膜中含有大量的—CH₃键，从而减少了孔洞塌陷.用扫 描电子显微镜观察薄膜的表面形貌，发现薄膜内孔洞尺寸在70—80 nm之间.调节溶胶pH值，发现pH值越小凝胶时间越长.对改性样品热处理的结果表明，在300 ℃时介电常数最低达2.05. 关键词： 2')" href="#">多孔SiO₂ 低介电常数 溶胶-凝胶     

单模石英光纤中连续波泵浦SRS谱的演化

利用连续波掺Yb双包层光纤激光器为泵浦源,对单模石英光纤中受激Raman散射谱的形成过程进行了实验研究结果表明,由自发Raman散射向受激Raman散射演化的过程中Stokes谱宽度不断变窄当Stokes波信号功率较强时,在Raman光谱内部会出现能量红移现象,使Stokes光谱峰值相对于泵浦波的频移量从440cm^-1转化到490cm^-1.     

一种硅基SiO2波导耦合器的设计与分析

波导耦合器是组成光纤传感系统和光纤通信系统光收发组件及模块的重要元器件,是实现光收发模块一体化光电集成的基础。给出了一种用光纤陀螺系统的X型四端口波导耦合器的工作原理,采用有效折射率法和BPM(Beam propagation method)法建立了耦合器的数学模型,计算并分析了耦合器尺寸在尽可能小的情况下和在满足单模传输的条件下耦合器的耦合系数、有效耦合长度、分光比以及回波损耗等参数之间的关系,并对其关键技术进行了系统的研究。仿真结果表明,所设计的波导耦合器在低损耗情况下分光比可达到50%∶50%,耦合器全长为33.5mm,输入输出波导间距为410μm,芯层截面积为6μm×6μm。     

Short Tm3+-doped fiber lasers with watt-level output near 2 μm

High-power operation of diode-pumped fiber lasers at wavelength near 2μm are demonstrated with short length of heavily Tm3 -doped silica glass fibers. With 7-cm long fiber, a laser at near 2 μm is obtained with the threshold of 135 mW, maximum output power of 1.09 W, and slope efficiency of 9.6% with respect to the launched power from a laser diode at 790 nm. The output stability of this fiber laser is within 5%.The dependence of the performance of fiber lasers on the operation temperature and cavity configuration parameters is also investigated.     

通讯波段禁带胶体光子晶体的制备及实验参数研究

采用直径为700nm的二氧化硅微球,通过垂直沉积法在玻璃基片上制备了位于光通讯波段的禁带胶体光子晶体。研究了不同蒸发温度、湿度条件、干燥过程对样品晶体质量的影响。用扫描电子显微镜(SEM)对其形貌进行了观测。实验结果表明,在温度为65℃,相对湿度为70%,缓慢干燥条件下制备出的样品具有较好的晶体质量,晶体在大范围内保持了面心立方(FCC)单晶结构,其(111)面平行于生长基片。     

Engineering and characterization of mesoporous silica-coated magnetic particles for mercury removal from industrial effluents

Mesoporous silica coatings were synthesized on dense liquid silica-coated magnetite particles using cetyl-trimethyl-ammonium chloride (CTAC) as molecular templates, followed by sol-gel process. A specific surface area of the synthesized particles as high as 150 m²/g was obtained. After functionalization with mercapto-propyl-trimethoxy-silane (MPTS) through silanation reaction, the particles exhibited high affinity of mercury in aqueous solutions. Atomic force microscopy (AFM), zeta potential measurement, thermal gravimetric analysis (TGA), analytical transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and atomic absorption spectroscopy (AAS) were used to characterize the synthesis processes, surface functionalization, and mercury adsorption on the synthesized magnetite particles. The loading capacity of the particles for mercury was determined to be as high as 14 mg/g at pH 2. A unique feature of strong magnetism of the synthesized nanocomposite particles makes the subsequent separation of the magnetic sorbents from complex multiphase suspensions convenient and effective.     

掩埋式多模干涉型分束器的反射性能

通过束传播方法(BPM)模拟了SiO2基掩埋式波导结构多模干涉(MMI)型分束器的反射性能,模拟结果表明,MMI工作在分束模式时存在最优的多模干涉长度实现最大输出和最小反射,而在合束模式下实现最大输出时反射也达到最大,这是由自映象原理决定的。SiO2基掩埋式波导结构MMI分束器对反射具有良好的抑制作用,其最大反射功率为-60dB。分析表明,多模干涉区末端的界面反射率决定了器件的反射强弱,SiO2基掩埋式波导的界面反射率非常低,这是其低反射的原因。     

二维衰减全反射红外光谱研究水在聚酰亚胺/二氧化硅纳米高分子复合膜中的吸附扩散行为

考虑到基于聚酰亚胺衍生物的电子器件的稳定性和性能,运用二维衰减全反射红外相关光潜研究了水在聚酰亚胺衍生物:poly(4’4- oxydiphenylene pyromellitimide)和二氧化硅的纳米高分子复合膜中的动态吸附和扩散行为．二维相关光谱区分出了三种不同氢键强度的水分子状态,同时,氢键的数量和强度还对不同状态水分子的扩散速率起了决定性的作用,和PI聚合物本身以及PI表面残留的硅酸形成氢键的水分子的扩散速度则最慢.