Properties of Natural Rubber Vulcanizates/Nanosilica Composites Prepared Based on the Method of In-situ Generation and Coagulation

Using the characteristics of silica sol dispersing well in water and easy formation of silica gel when the silica sol is heated, by mixing a system of concentrated natural rubber latex and silica sol, the silica sol can in-situ generate SiO₂ particles when heated. After coagulation of the mixed system, natural rubber/nanosilica composites C(NR/nSiO₂) were obtained. The composites C(NR/nSiO₂) and their vulcanizates were studied using a rubber processing analyzer (RPA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The influence of silica contents on the C(NR/nSiO₂) vulcanizates mechanical properties, cross-linking degree, Payne effect, dissipation factor (tanδ), and the particle size and dispersion of SiO₂ in NR were investigated. The results obtained were compared with the NR/SiO₂ composites based on traditional dry mixing of bale natural rubber and precipitated silica (white carbon black). The results showed that when using a sulfur curing system with a silica coupling agent (Si69) in C(NR/nSiO₂), the vulcanizate had better mechanical properties, higher wet resistance, and lower rolling resistance than those without Si69. In the composites C(NR/nSiO₂) and their vulcanizates, the SiO₂ particles’ average grain diameter was 60 nm, and the good-dispersion of the in-situ generated SiO₂ in the rubber matrix were a significant contribution to the satisfactory properties of C(NR/nSiO₂) composites and their vulcanizates.     

Epoxy/Silica Nanohybrids or Nanocomposites: Atomic Force Microscopy and X-ray Photoelectron Spectroscopy Investigation of the Processing–Structure–Property Relationships

The structural and morphological features influencing the glass transition temperature of epoxy/silica nanohybrid and nanocomposite materials containing 25–30 phr of nanoscale silica phases are discussed in this letter to answer the questions related to the processing–structure–property relationships. X-ray photoelectron spectroscopy and atomic force microscopy are used to study the surface chemical structure and morphology of epoxy/silica nanohybrids and nanocomposites. Nanohybrids are synthesized via in situ sol-gel process, while the respective nanocomposites are prepared by mechanical blending of preformed silica nanoparticles into epoxy resin. Differential scanning calorimetry is used to determine glass transition temperature of different materials. The surface analytical characterizations reveal that in situ sol-gel process is more suitable for producing organic–inorganic hybrid materials with superior glass transition temperature owing to the achievement of stronger interfacial compatibility and greater crosslink density. A number of other factors affecting glass transition temperature are explored and discussed with reference to surface chemistry, microstructure, and morphology of epoxy/silica nanohybrids and nanocomposites, respectively.     

Synchrotron x-ray-diffraction study of α-cristobalite at high pressure and high temperature

Abstract

Energy-dispersive x-ray diffraction using synchrotron radiation was carried out on α-cristobalite to 3 GPa and 350°C in a cubic anvil press. A cascading structural phase transition occurred beyond 0.61 GPa at room temperature. The transition was accompanied by a splitting of most of the a-cristobalite reflections: the (111) reflection at 0.61 GPa through the (211) reflections at 2.13 GPa, with many other lines between. The pressure of this transition decreased with increasing temperature.     

Structural and optical modifications in gamma-irradiated polyimide/silica nanocomposite

The structural and optical properties of thin films of polyimide composites with nanosilica particle content of 15?wt%, prepared via sol–gel process, were studied as a function of the gamma dose. The resultant effect of gamma irradiation on the properties of polyimide/silica nanocomposite has been investigated using X-ray diffraction and UV spectroscopy. Absorption and reflectance spectra were collected by a spectrophotometer giving UV-radiation of wavelength range 200–800?nm. The optical data obtained were analyzed and the calculated values of the optical energy gap exhibited gamma dose dependence. The direct optical energy gap for the nonirradiated polyimide/silica nanocomposite is about 2.41?eV, and increases to a value of 2.65?eV when irradiated with gamma doses up to 300?kGy. It was found that the calculated refractive index of the polyamide/silica increases with the gamma dose in the range 50–300?kGy.     

气相法二氧化硅负载胺-钯配合物的制备及对Heck反应催化性能的研究

以气相法二氧化硅为载体,链状胺和环胺为功能化试剂,制得一系列二氧化硅-胺基复合载体,通过配位反应得到二氧化硅负载胺-钯（Ⅱ）配合物,进一步还原得到二氧化硅负载胺-钯（0）配合物．采用IR、XRD、XPS、ICP技术对配合物进行表征,并研究了配合物的制备、反应条件以及配体差异对其催化碘苯与丙烯酸的Heck反应的性能．结果表明,该类催化剂在较低的温度下（70～90℃）即可较好地催化该反应,生成反式产物;还原后催化剂具有更好的催化活性和良好的重复使用性能;具有链状胺基配体的催化剂随着N原子数目的增加,催化活性呈上升趋势,而具有环状胺基配体的催化剂活性明显低于前者．     

HPLC法测定人体尿液样品中的4'-羟基黄烷酮和6-甲氧基黄烷酮

报道一种快速测定人体尿液中4'-羟基黄烷酮和6-甲氧基黄烷酮的HPLC方法.采用自制的大蒜新素键合硅胶填充柱(DTSP,4.6 mm i.d.×15 mm,10 μm),以乙腈/1.5%三乙胺-甲酸(65:35,v/v,pH=3.0) 为流动相,流速设定为1.0 mL·minn~(-1),检测波长为 257 nm时,实现了人体尿样品中上述黄烷酮化合物的良好分离.4'-羟基黄烷酮的线性范围为5～100 mg·L~(-1),r=0.992 0;6-甲氧基黄烷酮线性范围为5～100 mg·L~(-1),r=0.999 1,它们的最低检出限分别为1.03 ng和1.56 ng,平均回收率分别为99.02%～99.26%和98.21%~98.62%,相应的RSD分别小于0.354%和0.605%(n=5).该方法快速、简便、可靠,适用于人体尿液样品中上述黄烷酮分离分析.     

SiO2包覆共轭聚合物CN-PPV纳米探针的制备与荧光性质

采用纳米沉淀法制备了半导体聚合物CN-PPV纳米粒子,并用改进的Stber方法对纳米粒子进行包覆,获得了发光稳定的SiO2/CN-PPV纳米粒子。用动态光散射(DLS)及透射电镜(TEM)方法对粒子尺寸进行了表征,结果表明包覆前的CN-PPV纳米粒子平均粒径约为30 nm,包覆获得SiO2/CN-PPV纳米粒子的平均粒径约为60 nm。通过紫外-可见吸收光谱及荧光光谱对包覆前后纳米粒子的发光性质进行了比较,发现共轭聚合物CN-PPV包覆后的发射光谱与包覆前相比发生了小的蓝移,表明共轭聚合物的分子构型可能发生了微小变化。SiO2包覆可以提高聚合物发光分子的光稳定性,并且提供用于生物分子耦联的表面,这类材料有望在生物医学成像中获得应用。     

金纳米棒核／二氧化硅壳纳米复合结构的可控制备及细胞成像

采用模板合成以及溶胶凝胶方法制备了金纳米棒核／二氧化硅壳（GNR@SiO2）纳米复合粒子,探讨了这种新型纳米复合结构的可控制备、光谱性质、细胞毒性和细胞成像。通过紫外可见分光光度计、透射电镜、共聚焦显微镜对样品进行表征,结果表明：通过对反应时间的调控,获得的纳米复合粒子的二氧化硅壳层厚度可以控制在20～30nm。由于二氧化硅壳层的存在,大大提高了金纳米棒的稳定性,同时降低了金纳米棒的细胞毒性;此外,由于二氧化硅壳层具有良好的化学修饰作用,因此可以将荧光探针分子标记在二氧化硅壳层表面,修饰后的纳米复合粒子可以通过细胞内吞作用进入细胞,从而实现细胞内的光学成像。因此,该纳米粒子复合材料在生物传感、细胞成像以及光热治疗等方面有着良好的应用前景。     

Surface chemical modification of TEOS based silica aerogels synthesized by two step (acid-base) sol-gel process

The present paper describes the comparative studies on the hydrophobic and physical properties of the tetraethoxysilane (TEOS) based silica aerogels prepared by two step sol-gel process followed by supercritical drying. Silica alcogels were prepared by keeping the molar ratio of TEOS:methanol (MeOH):H₂O (acidic):H₂O (basic) constant at 1:33:3.5:3.5 with oxalic acid and ammonium hydroxide concentrations fixed at 0.001 and 1 M, respectively. In all, nine different co-precursors (CP) of the type R_nSiX_4 − n, have been used. The aerogels have been characterized by density, porosity, percentage of volume shrinkage, optical transmission, contact angle and thermal conductivity measurements. The surface chemical modification of silica aerogels was confirmed by the presence of CH and SiC peaks at 2900, 1450 and 840 cm⁻¹, respectively, from the Fourier transform-infrared spectroscopy (FT-IR). The microstructure of the aerogels was studied using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) techniques. In addition to these studies, the stability of the hydrophobic aerogels against an organic impurity (methanol, in the present studies) in water has also been studied.     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。