Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.     

XPS characterization of wood chemical composition after heat‐treatment

XPS was used to characterize the chemical changes occurring after drying or applying a heat‐treatment to beech wood samples. Our results indicate that the surface of this air‐exposed material could be strongly affected either by the ambient atmosphere during storage or by the complex atmosphere in the oven during drying or heat‐treatment. However, the O/C ratio measured after removal of a thin slice of a few millimetres of an untreated sample is in reasonable agreement with that calculated from the well‐established chemical composition of beech. Through this methodology (equivalent to scraping for hard materials) it is expected to get a realistic characterization of the wood. The reliability and repeatability of the XPS measurements have been checked and the method applied to the study of the chemical changes of the beech samples subjected to heat‐treatment. Heating at 240 °C induces a significant decrease of the O/C ratio from 0.55 before to 0.44 after the treatment. Heat‐treatment induces also a decrease of the C₂ carbon contribution (carbon atom bound to a single non‐carbonyl oxygen) associated with an increase of the C₁ carbon contribution (carbon atoms bound only to carbon or hydrogen atoms), in agreement with chemical modifications reported previously in the literature. Thanks to the small analysed area of the equipment used in this study, different spots were analysed to demonstrate the presence or absence of a gradient of chemical composition due to thermal degradation or migration of extractives from within the wood structure to its surface. At the scale of our observations, the different wood samples investigated (dried or heat treated) appear to be homogeneous. Copyright © 2006 John Wiley & Sons, Ltd.     

Unveiling the Hidden Therapeutic Potential of Carnosine,a Molecule with a Multimodal Mechanism of Action: A Position Paper

Carnosine (β-alanyl-L-histidine) is a naturally occurring endogenous dipeptide and an over-the-counter food supplement with a well-demonstrated multimodal mechanism of action that includes the detoxification of reactive oxygen and nitrogen species, the down-regulation of the production of pro-inflammatory mediators, the inhibition of aberrant protein formation, and the modulation of cells in the peripheral (macrophages) and brain (microglia) immune systems. Since its discovery more than 100 years ago, a plethora of in vivo preclinical studies have been carried out; however, there is still substantial heterogeneity regarding the route of administration, the dosage, the duration of the treatment, and the animal model selected, underlining the urgent need for “coordinated/aligned” preclinical studies laying the foundations for well-defined future clinical trials. The main aim of the present position paper is to critically and concisely consider these key points and open a discussion on the possible “alignment” for future studies, with the goal of validating the full therapeutic potential of this intriguing molecule.     

Canady Cold Helios Plasma Reduces Soft Tissue Sarcoma Viability by Inhibiting Proliferation,Disrupting Cell Cycle,and Inducing Apoptosis: A Preliminary Report

Soft tissue sarcomas (STS) are a rare and highly heterogeneous group of solid tumors, originating from various types of connective tissue. Complete removal of STS by surgery is challenging due to the anatomical location of the tumor, which results in tumor recurrence. Additionally, current polychemotherapeutic regimens are highly toxic with no rational survival benefit. Cold atmospheric plasma (CAP) is a novel technology that has demonstrated immense cancer therapeutic potential. Canady Cold Helios Plasma (CHCP) is a device that sprays CAP along the surgical margins to eradicate residual cancer cells after tumor resection. This preliminary study was conducted in vitro prior to in vivo testing in a humanitarian compassionate use case study and an FDA-approved phase 1 clinical trial (IDE G190165). In this study, the authors evaluate the efficacy of CHCP across multiple STS cell lines. CHCP treatment reduced the viability of four different STS cell lines (i.e., fibrosarcoma, synovial sarcoma, rhabdomyosarcoma, and liposarcoma) in a dose-dependent manner by inhibiting proliferation, disrupting cell cycle, and inducing apoptosis-like cell death.     

利用收音机制作激光通信演示器

本文介绍了一种利用学生在电子技术实验课中自己组装的收音机,稍加改造而制作的一种简单适用、并且效果很好的激光通信演示器。     

声光调制实验的一种CCD成像改进方法

提出了声光调制实验的一种CCD成像改进的实验方法,即声光调制的入射光和衍射光成像于CCD上,对光斑图像进行编程处理,计算机给出光斑的位置。给出了实验步骤、图像处理算法和实验结果。     

A Fault Detection Method for Electrohydraulic Switch Machine Based on Oil-Pressure-Signal-Sectionalized Feature Extraction

A turnout switch machine is key equipment in a railway, and its fault condition has an enormous impact on the safety of train operation. Electrohydraulic switch machines are increasingly used in high-speed railways, and how to extract effective fault features from their working condition monitoring signal is a difficult problem. This paper focuses on the sectionalized feature extraction method of the oil pressure signal of the electrohydraulic switch machine and realizes the fault detection of the switch machine based on this method. First, the oil pressure signal is divided into three stages according to the working principle and action process of the switch machine, and multiple features of each stage are extracted. Then the max-relevance and min-redundancy (mRMR) algorithm is applied to select the effective features. Finally, the mini batch k-means method is used to achieve unsupervised fault diagnosis. Through experimental verification, this method can not only derive the best sectionalization mode and feature types of the oil pressure signal, but also achieve the fault diagnosis and the prediction of the status of the electrohydraulic switch machine.     

非定常机匣处理扩稳实验研究

针对一种非定常处理机匣,在轴流风扇实验台上开展偏流吹气扩稳实验研究.主要包括t改善风扇稳定裕度的稳态特性;影响失速先兆波产生及发展的动态分析.结果表明:非定常机匣处理能够在不同工作转速下对风扇稳定裕度有显著效果,效率没有明显改变.偏流吹气可以进一步改善风扇稳定裕度,但同时也会带来一定的效率损失.动态分析证实处理机匣没有阻止失速先兆波的出现.而是有效地抑制了其非线性发展.     

Decontamination Efficiency of Thermal,Photothermal, Microwave,and Steam Treatments for Biocontaminated Household Textiles

With the outbreak of the COVID-19 pandemic, textile laundering hygiene has proved to be a fundamental measure in preventing the spread of infections. The first part of our study evaluated the decontamination efficiency of various treatments (thermal, photothermal, and microwave) for bio contaminated textiles. The effects on textile decontamination of adding saturated steam into the drum of a household textile laundering machine were investigated and evaluated in the second part of our study. The results show that the thermal treatment, conducted in a convection heating chamber, provided a slight reduction in efficiency and did not ensure the complete inactivation of Staphylococcus aureus on cotton swatches. The photothermal treatment showed higher reduction efficiency on contaminated textile samples, while the microwave treatment (at 460 W for a period of 60 s) of bio contaminated cotton swatches containing higher moisture content provided satisfactory bacterial reduction efficiency (more than 7 log steps). Additionally, the treatment of textiles in the household washing machine with the injection of saturated steam into the washing drum and a mild agitation rhythm provided at least a 7 log step reduction in S. aureus. The photothermal treatment of bio contaminated cotton textiles showed promising reduction efficiency, while the microwave treatment and the treatment with saturated steam proved to be the most effective.