Design of selective molecularly imprinted sorbent for the optimized solid‐phase extraction of S‐pramipexole from the model multicomponent sample of human urine

The objective of this article was to design the selective molecularly imprinted sorbent dedicated to the solid‐phase extraction of S‐pramipexole from the complex matrix such as human urine. For that purpose, S‐2,6‐diamino‐4,5,6,7‐tetrahydrobenzothiazole was used as the template acting as the structural analog of S‐pramipexole and five various monomers were employed in the presence of ethylene glycol dimethacrylate to produce molecularly imprinted polymers. The binding capabilities of resulted polymers revealed that the highest imprinting effect was noted for polymer prepared from the itaconic acid. The comprehensive analysis of morphology and the characterization of binding sites showed not only negligible differences in the extension of surfaces of imprinted and nonimprinted polymers but also higher heterogeneity of binding sites in the imprinted material. Comprehensive optimization of the molecularly imprinted solid‐phase extraction allowed to select the most appropriate solvents for loading, washing, and elution steps. Subsequent optimization of mass of sorbent and volumes of solvents allowed to achieve satisfactory total recoveries of S‐pramipexole from the model multicomponent real sample of human urine that equals to 91.8 ± 3.2% for imprinted sorbent with comparison to only 37.1 ± 1.1% for Oasis MCX.     

Preparation and application of molecularly imprinted polymer solid‐phase microextraction fiber for the selective analysis of auxins in tobacco

As signal molecules, auxins play an important role in mediating plant growth. Due to serious interfering substances in plants, it is difficult to accurately detect auxins with traditional solid‐phase extraction methods. To improve the selectivity of sample pretreatment, a novel molecularly imprinted polymer ‐coated solid‐phase microextraction fiber, which could be coupled directly to high‐performance liquid chromatography, was prepared with indole acetic acid as template molecule for the selective extraction of auxins. The factors influencing the polymer formation, such as polymerization solvent, cross‐linker, and polymerization time, were investigated in detail to enhance the performance of indole acetic acid‐molecularly imprinted polymer coating. The morphological and chemical stability of this molecularly imprinted polymer‐coated fiber was characterized by scanning electron microscopy, infrared spectrometry, and thermal analysis. The extraction capacity of the molecularly imprinted polymer‐coated solid‐phase microextraction fiber was evaluated for the selective extraction of indole acetic acid and indole‐3‐pyruvic acid followed by high‐performance liquid chromatography analysis. The linear range for indole acetic acid and indole‐3‐pyruvic acid was 1–100 µg/L and their detection limit was 0.5 µg/L. The method was applied to the simultaneous determination of two auxins in two kinds of tobacco (Nicotiana tabacum L and Nicotiana rustica L) samples, with recoveries range from 82.1 to 120.6%.     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Coordination polymers and a dinuclear complex constructed from zinc(II) ions and fluorescein: iodine adsorption and optical properties

Abstract

1-D coordination polymers, ¹_∞[Zn(fl)₂]·2EtOH and ¹_∞[Zn(fl)₂]·2MeOH, and a dinuclear complex, [{Zn(fl)₂}₂(dienpip)]·4H₂O·4EtOH (dienpip?= N,N′-bis(2-aminoethyl)piperazine), were obtained using Zn(II) ions and fluorescein anions (fl). Thermal analysis shows stability of the polymers after solvent removal up to more than 400?°C. Crystallization solvent molecules were removed under reduced pressure with the preservation of the polymeric structure, ¹_∞[Zn(fl)₂]. Desolvated crystals were exposed to I₂ vapors and the crystal structure determination by X-ray diffraction confirmed the presence of I₂ molecules in the channels generated in crystals by the metal-organic framework. The iodine content, evaluated by X-ray diffraction, corresponds to the overall formula ¹_∞[Zn(fl)₂]·0.3I₂. The optical properties of the coordination polymers and the dinuclear complex have been investigated.     

过氧化钙制备实验的改进 ——以鸡蛋壳为原料

Instead of calcium chloride, we used egg shells as material in the experiment for synthesis of calcium peroxide. This could help to improve students' environmental consciousness and stimulate students' interest in experiment. We designed procedures for egg shells pre-treatment and the synthesis of calcium peroxide, which were suitable for students. The amount of hydrogen peroxide and ammonia was optimized. The yield of anhydrous calcium peroxide was about 70% with a great than 75% purity.     

烷基苯磺酸盐表面活性剂对水合硅酸钙形貌和结构的影响

利用十二烷基苯磺酸钠(SDBS)为模板剂, 研究了SDBS的浓度、 Ca ²⁺和Si {\mathrm{O}}_3^{2-} 离子的浓度、 是否搅拌和反应时间等条件对水合硅酸钙(CSH)形貌特征和分散性能的影响, 并提出了不同CSH球壳形貌特征的形成机理. 结果显示, 溶液中Na₂SiO₃·9H₂O浓度增大、 SDBS浓度增大及反应时间延长均会使CSH的结晶度变好, 聚合度增大, Q ²结构的相对含量增加, 其中Na₂SiO₃·9H₂O和SDBS浓度是主要控制因素. SDBS在溶液中形成的球形胶束具有极强的模板作用, 能有效改变CSH的结晶生长方式; 通过调节SDBS浓度和钙硅比例, 并适当延长CSH的生长时间, 能够获得球壳完整、 分散性好且稳定性强的CSH.     

A Conjugated Polymer Containing Arylazopyrazole Units in the Side Chains for Field‐Effect Transistors Optically Tunable by Near Infra‐Red Light

Optically tunable field‐effect transistors (FETs) with near infra‐red (NIR) light show promising applications in various areas. Now, arylazopyrazole groups are incorporated in the side chains of a semiconducting donor–acceptor (D‐A) polymer. The cis–trans interconversion of the arylazopyrazole can be controlled by 980 nm and 808 nm NIR light irradiation, by utilizing NaYF₄:Yb,Tm upconversion nanoparticles and the photothermal effect of conjugated D‐A polymers, respectively. This reversible transformation affects the interchain packing of the polymer thin film, which in turn reversibly tunes the semiconducting properties of the FETs by the successive 980 nm and 808 nm light irradiation. The resultant FETs display fast response to NIR light, good resistance to photofatigue, and stability in storage for up to 120 days. These unique features will be useful in future memory and bioelectronic wearable devices.     

Solid Amine Adsorbent Prepared by Molecular Imprinting and Its Carbon Dioxide Adsorption Properties

A carbon dioxide imprinted solid amine adsorbent (IPEIA‐R) with polyethylenimine (PEI) as a skeleton was conveniently prepared by using glutaraldehyde to cross‐link carbon dioxide‐preadsorbed PEI. As confirmed by FTIR, FT‐Raman, and ¹³C NMR spectroscopy, CO₂ preadsorbed on PEI could occupy the reactive sites of amino groups and act as a template for imprinting in the cross‐linking process. The imino groups formed from the cross‐linking reaction between glutaraldehyde and PEI could be reduced by NaBH₄ to form CO₂‐adsorbable amino groups. The adsorption results indicated that CO₂ imprinting and reduction of imino groups by NaBH₄ endowed the adsorbent with a higher CO₂ adsorption capacity. Compared with PEI‐supported mesoporous adsorbents, the solid amine adsorbent with PEI as a skeleton can avoid serious pore blockage and CO₂ diffusion resistance, even with a high amine content. The solid amine adsorbent with PEI as a skeleton showed a remarkable CO₂ adsorption capacity (8.56 mmol g^?1) in the presence of water at 25 °C, owing to the high amine content and good swelling properties. It also showed promising regeneration performance and could maintain almost the same CO₂ adsorption capacity after 15 adsorption–desorption cycles.     

Application of Linear and Branched Poly(Ethylene Glycol)‐Poly(Lactide) Block Copolymers for the Preparation of Films and Solution Electrospun Meshes

Poly(ethylene glycol)‐poly(lactide) (PEG‐PLA) block copolymers are processed to solvent cast films and solution electrospun meshes. The effect of polymer composition, architecture, and number of anchoring points for the plasticizer on swelling, degradation, and mechanical properties of these films and meshes is investigated as potential barrier device for the prevention of peritoneal adhesions. As a result, adequate properties are achieved for the massive films with a longer retention of the plasticizer PEG for star‐shaped block copolymers than for the linear triblock copolymers and consequently more endurable mechanical properties during degradation. For electrospun meshes fabricated using the same polymers, similar trends are observed, but with an earlier start of fragmentation and lower tensile strengths. To overcome the poor mechanical strengths and an occurring shrinkage during incubation, which may impair the coverage of the wound, further adaptions of the meshes and the fabrication process are necessary.

     

Molecular dynamics simulations of hydration shell on montmorillonite (001) in water

Molecular dynamics simulations (MDS) of montmorillonite (001)/water interface system were used for studying the hydration shell on the montmorillonite surface in this work. The study was performed on the simulation of concentration profile and self‐diffusion coefficients. The results have shown that there was a hydration shell on the surface with the thickness of approximately 1.74 nm, which was composed of six ordered water molecule layers, including ordered layers and transition layers. The water molecules in the shell were closely and orderly arranged than those in bulk water, leading to a higher concentration of water molecules. Copyright © 2016 John Wiley & Sons, Ltd.