层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

Environmental and economic comparison of waste solvent treatment options

The sustainable development and consumption need more efficient use of natural resources. As a consequence, the use of industrial solvents demands their recovery instead of end-of-pipe treatment. It is not always clear, however, which treatment alternative should be applied. Based on an industrial case study, the environmental and economic evaluation and comparison of the treatment alternatives of a non-ideal solvent mixture containing azeotropes is investigated for determining the preferable option. For the recovery of the industrial solvent mixture, two different separation alternatives are evaluated: a less effective alternative and a novel design based on hybrid separation tools. An end-of-pipe treatment alternative, incineration, is also considered and the split of the solvent mixtures between recovery and incineration is investigated. The environmental evaluation of the alternatives is carried out using ‘Eco-indicator 99 life-cycle impact assessment methodology’. Economic investigation is also accomplished. The economic features clearly favour the total recovery, however, the environmental evaluation detects that if a recovery process of low efficiency is applied, its environmental burden can be similar or even higher than that of the incineration. This motivates engineers to design more effective recovery processes and reconsider the evaluation of process alternatives at environmental decision making.     

A new inorganic-organic polymer for the passivation of thin film capacitors

Inorganic-organic polymers with barrier properties against water vapor, excellent electrical data (3, 2, R _D>10¹⁶ cm, E _D up to 400 V/µm) and good adhesion to various substrate materials have been developed. Tailored modifications of these materials provide an excellent protective coating for thin film capacitors. Several mm thick, expensive, encapsulations could be replaced by thin coatings (up to 10 µm). The polymer coating allows the use of thin film chip capacitors in surface-mount technology. As a measure for the efficiency of the coating, the capacitance decrease under controlled humidity has been used. The influence of the material composition, the type of catalyst during sol-gel processing and the curing conditions have been studied. Adhesion and water vapor permeation properties of the polymers and rheological properties of the coating solutions have been investigated. A protective coating is developed, which increases the withstandness of capacitors against humid conditions (90°C, 100% rel. humidity) by a factor of about 30 (compared to uncoated capacitors) and shows no crack formation during thermal cycling.     

Characterizations based on conditional expectations of the doubled truncated distribution

The expression of the continuous distribution function F(x) is obtained whenever % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqefm0B1jxALjhiov2D% aebbfv3ySLgzGueE0jxyaibaiGc9yrFr0xXdbba91rFfpec8Eeeu0x% Xdbba9frFj0-OqFfea0dXdd9vqaq-JfrVkFHe9pgea0dXdar-Jb9hs% 0dXdbPYxe9vr0-vr0-vqpWqaaeaabiGaciaacaqabeaadaqaaqGaaO% qaaerbhv2BYDwAHbacfiGaa8xBaiaabIcacaWG4bGaaiilaiaadMha% caqGPaGaa8hiaiaab2dacaWFGaGaa8xraiaa-HcacaWFybGaa8hiai% aa-XhacaWFGaGaa8hEaiaa-bcacqGHKjYOcaWFGaGaa8hwaiaa-bca% cqGHKjYOcaWFGaGaa8xEaiaa-Lcaaaa!53EE!\[m{\rm{(}}x,y{\rm{)}} {\rm{ = }} E(X | x \le X \le y)\]is known. Moreover, we obtain the necessary and sufficient conditions so that any function m: ² is the conditional expectation % MathType!MTEF!2!1!+-% feaafeart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXafv3ySLgzGmvETj2BSbqefm0B1jxALjhiov2D% aebbfv3ySLgzGueE0jxyaibaiGc9yrFr0xXdbba91rFfpec8Eeeu0x% Xdbba9frFj0-OqFfea0dXdd9vqaq-JfrVkFHe9pgea0dXdar-Jb9hs% 0dXdbPYxe9vr0-vr0-vqpWqaaeaabiGaciaacaqabeaadaqaaqGaaO% qaaiaadweacaGGOaGaamiwaerbhv2BYDwAHbacfiGaa8hiaiaacYha% caWFGaGaa8hEaiaa-bcacqGHKjYOcaWFGaGaa8hwaiaa-bcacqGHKj% YOcaWFGaGaa8xEaiaacMcaaaa!4D0D!\[E(X | x \le X \le y)\]of a random variable X with continuous distribution function. Furthermore, we relate m(x,y) to order statistics.     

Optimal life strategies in organisms exposed to recurrent critical events

The optimal partition of energy between survival and reproduction is considered for a population subject to recurrent and potentially lethal critical events. The best strategy is found by maximizing fitness, a functional derived from the Lotka equation. The dynamics is governed by a second-order, age-varying, nonlinear system. The energy storage and the probability of survival are the state variables, while the amounts of energy placed into and withdrawn from the storage are the controls. The optimal life strategy is shown to be as follows: build up the storage at the very beginning of life, and then progressively deplete it to resist the critical events.This work was partially supported by MURST Project Ricerche sui Fondamenti della Conservazione della Natura. The authors would like to thank C. Ricci for suggesting the problem and C. Matessi for helpful discussion.     

Controlling the quality of testing

 This article mainly focuses on the testing of products, materials, etc., but the general principles are applicable in a broader perspective. Quality of testing should be judged based on fitness for purpose. This judgement includes both objective and subjective elements. The possibility to make decisions and other professional judgements based on test results alone is discussed and compared with the decisions and judgements being made through the certification and inspection process. Quality, including the uncertainty of the test results, depends on many factors, and in order to make necessary improvements in the testing procedures based on the customers' needs, the right issues should be addressed. The question arises as to whether, in laboratories' quality systems and in the accreditation and certification process, attention is really paid to those factors that are crucial to obtaining reliable results.     

The American (USA) perspective six years after implementation of CLIA'88 (Federal) regulations

 On September 1, 1992 all testing sites in the United States were required to comply with the Clinical Laboratory Improvement Amendments of 1988 (CLIA'88). These regulations, based on both total quality management (TQM) and continuous quality improvement (CQI) principles, reshaped the environment for more than 90% of laboratories. CLIA'88 represented a revolutionary change by imposing universal, uniform regulations based on test complexity for all sites examining materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of disease. CLIA'88 specifies minimum requirements for personnel, quality control, and proficiency testing (PT). In addition, laboratories are required to follow manufacturers' directions and comply with other specified good laboratory practices. PT is mandated for most of the frequently run analyses and quality assurance requirements integrate the principles of CQI as well as TQM into the regulatory process. Biannual inspection is integral to CLIA'88, however, laboratories can choose other federally approved ("deemed") professional organizations, such as the Commission on Office Laboratory Accreditation, the College of American Pathologists, or the Joint Commission on Accreditation of Healthcare Organization, having standards that meet or exceed those of CLIA'88. CLIA'88 has still not been finalized. This article discusses the impact and changes since CLIA's implementation in 1992. Received: 5 October 1998 · Accepted: 20 October 1998     

Microwave-assisted reaction of peptide formation by amino acid with phosphate:Exploration of the most possible channels for the origin of life

The formation of peptides and then protein by small abiological molecules clusters such as amino acid is a key stage in the origin of life[1]. More and more ex- perimental results showed that phosphate plays an important role in the formation of biomolecules in prebiotic chemical evolution. The principal reservoirs of biochemical energy are phosphates (such as ATP). The peculiar role of phosphates in contemporary life might suggest its essential role in prebiotic energy conversion, syntheses …     

Application of the iterative difference-dedicated configuration interaction method to the determination of excitation energies in some benchmark systems: Be, CH+, BH and CH2

The iterative difference-dedicated CI method (IDDCI) has been applied to determine excitation energies in small systems for which benchmark FCI and other high-level calculations exist. Transitions to excited singlet and triplet states in Be and vertical transitions in CH⁺, BH and CH₂ are reported. The deviations from FCI results are lower than 0.1 eV and compare advantageously with SDCI including size-consistency corrections, (SC)²SDCI, and with coupled cluster calculations including the effect of triples, especially for the states which have a predominant double excitation character. The IDDCI procedure has been speeded up by using smaller subspaces for optimizing the molecular orbitals. Received: 17 January 1997 / Accepted: 31 July 1997     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image