Experiment on relationship between the magnetic gradient of low-carbon steel and its stress

In geomagnetic field, a series of tensile experiments on the low-carbon steel sticks were carried out. A special homemade detector was used to measure the magnetic gradient on the material surface. The results showed that the relationship between the magnetic gradient and the stress varied with different conditions of measurement. There was no obvious correlation between the magnetic gradient and the tensile stress if the sample remained on the material test machine. If the sample was taken off from the machine, the measured magnetic gradient was linear with the prior maximum stress. In Nanjing, PR China, a place of 32°N latitude, the slope of the linear relationship was about 67 (uT/m)/MPa. This offered a new method of non-destructive stress testing by measuring the magnetic gradient on the ferromagnetic component surface. The prior maximum applied stress of the sample could be tested by measuring the present surface magnetic gradient. Actually this phenomenon was the metal magnetic memory (MMM). The magnetic gradient near the stress concentration zone of the sample, the necking point, was much larger than other area. Thus, the hidden damage in the ferromagnetic component could be detected early by measuring the magnetic gradient distribution on its surface. In addition, the magnetic memory signal gradually weakened as the sample was taken off and laid aside. Therefore, it was effective for a given period of time to detect the stress or stress concentration based on the MMM testing.     

Stress–Strain Dependence of Segmented Polyurethanes and Polyurethane Ureas

The stress–strain dependences of segmented elastomers based on polyetherurethanes, polyesterurethane ureas, and polybutadieneurethane ureas were investigated. These dependences were adequately described using the generalized approach proposed earlier by the authors for amorphous elastomers. The experimental data obtained for four series of samples with chemical cross-linking confirmed an applicability of this approach for segmented elastomers. Unlike amorphous elastomers, the effective network density value was affected not only by the density of the chemical network, but the contribution of the network formed by the hard domains also needs be taken into account.     

A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

Rheological Behavior of Dope Solutions of Poly(acrylonitrile‐co‐itaconic acid) in N,N‐dimethylformamide: Effect of Polymer Molar Mass

The rheological behavior of dope solutions of poly(acrylonitrile‐co‐itaconic acid) or poly(AN‐co‐IA) is important from the point of view of deriving the spinning conditions for good quality special acrylic fibers. The viscosity of the resin dope is dictated by the polymer concentration, molar mass, temperature and shear force. The dynamic shear rheology of concentrated poly(AN‐co‐IA) polymer dope solutions in N, N‐dimethylformamide, in the molar mass (M¯_v) range of 1×10⁵ to 1×10⁶ g/mol, was investigated in the shear rate (γ′) range of 1×10¹ to 5×10⁴ min^?1. An empirical relation between η and M¯_v was found to exist at constant shear rate. The dope viscosity was dependent on the molar mass and the shear rate at a given temperature (T) and concentration. The polymer molar mass index of dope viscosity (m) was calculated as functions of concentration (c), shear rate and temperature. The m values increased with shear rate and temperature. A master equation relating m, with shear rate and temperature was derived for a given dope concentration. At higher shear rates, m tends to the value of 3.4, which is close to the molar mass index of viscosity reported for molten thermoplastics. m increased significantly with shear rate and nominally with temperature, while an increase in concentration decreased it. The onset of shear thinning of the dope shifted to a lower shear rate regime with an increase in polymer concentration and the molar mass. For a given value of molar mass, the increase in viscosity of the dope solution with polymer concentration was dependent on the shear rate.     

TDAG51 deficiency promotes oxidative stress-induced apoptosis through the generation of reactive oxygen species in mouse embryonic fibroblasts

Apoptosis has an important role in maintaining tissue homeostasis in cellular stress responses such as inflammation, endoplasmic reticulum stress, and oxidative stress. T-cell death-associated gene 51 (TDAG51) is a member of the pleckstrin homology-like domain family and was first identified as a pro-apoptotic gene in T-cell receptor-mediated cell death. However, its pro-apoptotic function remains controversial. In this study, we investigated the role of TDAG51 in oxidative stress-induced apoptotic cell death in mouse embryonic fibroblasts (MEFs). TDAG51 expression was highly increased by oxidative stress responses. In response to oxidative stress, the production of intracellular reactive oxygen species was significantly enhanced in TDAG51-deficient MEFs, resulting in the activation of caspase-3. Thus, TDAG51 deficiency promotes apoptotic cell death in MEFs, and these results indicate that TDAG51 has a protective role in oxidative stress-induced cell death in MEFs.     

Synthesis of new bicarbazole-linked triazoles as non-cytotoxic reactive oxygen species (ROS) inhibitors

Abstract

Carbazole analogs 3 and 4 and a new library of bicarbazole-linked triazoles 6–11 were prepared via new synthetic methodology. Metal-catalyzed oxidative coupling reaction was utilized for the synthesis of bicarbazole acetylene 4 and different metals (Zn⁺², Co⁺², Fe⁺³, Ni⁺², Cu⁺², Mn⁺²) as catalyst were screened. Only Fe-catalyzed reaction was found to be excellent and gave homocoupled product 4. Cu-catalyzed 1,3-dipolar cycloaddition was also utilized to install triazole moiety for the synthesis of hybrid molecules 6–11. Based on reported anti-inflammatory activity of carbazole and triazole scaffolds, all compounds were screened for their reactive oxygen species (ROS) inhibitory potential. Results from these studies revealed triazole 9 as most active compound (IC₅₀ value of 7.6?±?0.1?µg/mL on human whole blood and 2.7?±?0.09?µg/mL on isolated neutrophils) using ibuprofen as a standard. Therefore, class described herein can serve as attractive structural element for further studies on ROS inhibition.     

Investigation on the Stability of the Dispersion System of Cross-Linked Polyacrylamide Microspheres

The salt resistance, temperature resistance, and shear stability of a cross-linked polyacrylamide microsphere system are studied by microfiltration, light diffraction analysis, and optical microscopy. The results show that other conditions being equal, the particle diameter of cross-linked polyacrylamide microspheres decreases with increased NaCl concentration. When NaCl concentration is lower than 10,000 mg/L, its effect on the plugging performance of a cross-linked polyacrylamide microsphere system in regard to the nuclear pore membrane is weak in comparison with a linked polymer solution, but the former system has better salt tolerance. Particle diameter decreases with increased swelling temperature. When the swelling temperature is below 90°C, its effect on the plugging performance of the cross-linked polyacrylamide microsphere system in regard to nuclear pore membrane is weak in comparison with the linked polymer solution, but has better temperature tolerance. Particle size shows little change, with shearing rate being increased, while the shape remains about the same and the effect of shearing on the plugging performance of the cross-linked polyacrylamide microsphere dispersion system in regard to the nuclear pore membrane is weak in comparison with the linked polymer solution, but has better shear stability. The salt tolerance, temperature tolerance, and shear stability of microspheres are associated with a particular cross-linked structure.     

Rheological Properties of Model and Crude Oil Systems when Wax Precipitate under Quiescent and Flowing Conditions

Wax precipitation and deposition is a recurring challenge in transportation of crude oil, and increased knowledge about the behavior of such systems is necessary. Microscopy and differential scanning calorimetry were used to follow the crystallisation of wax for two model systems. The amount of solid was also determined by the latter method as well. The flow and viscoelastic behavior were investigated around the wax precipitation temperature, and the yield stress was determined both after dynamic and static cooling. Interpretation of the results was carried out in view of crystal growth and microstructure of the wax crystals. The variables that were studied were wax composition, amount of wax and thermal and shear history.     

Shear‐induced lamellar phase of an ionic liquid crystal at room temperature

The phase behaviour of a number of N‐alkylimidazolium salts was studied using polarizing optical microscopy, differential scanning calorimetry and X‐ray diffraction. Two of these compounds exhibit lamellar mesophases at temperatures above 50°C. In these systems, the liquid crystalline behaviour may be induced at room temperature by shear. Sheared films of these materials, observed between crossed polarisers, have a morphology that is typical of (wet) liquid foams: they partition into dark domains separated by brighter (birefringent) walls, which are approximately arcs of circle and meet at “Plateau borders” with three or more sides. Where walls meet three at a time, they do so at approximately 120° angles. These patterns coarsen with time and both T1 and T2 processes have been observed, as in foams. The time evolution of domains is also consistent with von Neumann's law. We conjecture that the bright walls are regions of high concentration of defects produced by shear, and that the system is dominated by the interfacial tension between these walls and the uniform domains. The control of self‐organised monodomains, as observed in these systems, is expected to play an important role in potential applications.