Approximate analytic expressions for the diffusiophoretic velocity of a spherical colloidal particle

The general expression is derived for the diffusiophoretic velocity of a spherical colloidal particle of radius a in a concentration gradient of symmetrical electrolyte. On the basis of this expression, simple approximate analytic expressions for the diffusiophoretic velocity correct up to the order of 1/κa is derived, where κ is the Debye-Hückel parameter. It is found that the approximate expression correct to order unity can be applied for κa ≥ 50 with negligible errors, while the approximate expression correct to order 1/κa can be applied for κa ≥ 20 with negligible errors.     

Fluidization characteristics of sawdust in a cold flow fluidized bed

India has abundance of biomass such as rice husk, bagasse, wheat straw, sawdust etc. which is used as a main or auxiliary fuel in the fluidized bed combustor, gasifier and pyrolizer. Design of such fluidized bed equipments require the knowledge of minimum fluidization velocity (U_mf), complete fluidization velocity (U_cf) and transport disengagement height (TDH). The present work reports the fluidization characteristic, U_mf, U_cf and TDH of the individual size groups of sawdust and mixture thereof. The results indicate that the U_mf and U_cf have a tendency to increase with increase in particle diameter, however the TDH shows the reverse trend. The sawdust particle size of 925 and 1200 ​μm showed significant difference between their U_mf and U_cf, an essential parameter for controlled fluidization. Based on the experimental work new correlations for the prediction of U_mf, U_cf and TDH for sawdust sample are proposed. The proposed correlations of U_mf, U_cf and TDH are in good agreement with experimental values and the deviations found within the range of nearly ±10% for all the samples.     

一种改进的AUVs变结构滑模控制策略研究

针对现有的变结构滑模控制切换面单一性会导致系统状态在原点处收敛缓慢的缺陷,对自主式水下机器人(AUVs)变结构滑模控制设计了折线型的切换面,并且进一步改进实现了速度控制和定点定速控制。改进的切换面由斜率不同的自线段构成,并在拐点处通过S型函数光滑过渡。将切换面的斜率减小到0时,则可以实现速度控制,同时为了消除速度控制的稳态误差,引进了采用能智积分方法的积分项。最后在某AUV上进行仿真实验,结果证实了应用折线型切换面可以减少控制系统的上升时间,提高反应速度;速度控制的稳态误差接近0,并很好地实现定点定速的控制效果。该方法可以有效用于AUVs的控制。     

双原子正方晶格光子晶体边界模式的光传输特性

利用平面波展开法,发现双原子正方晶格光子晶体中ΓM方向边界面存在着快慢两类边界模式,并且通过计算色散关系和电场分布研究了边界参量对这两类边界模式传输特性的影响.依据两种模式的色散关系,计算了群指数和群速度色散参量,结果表明边界参量的变化对第一类边界模式传输特性的影响较小,该模式的平均群指数始终维持在5.0左右;第二类边界模式与第一类模式明显不同,边界参量的变化能够有效地影响到这种模式的传输特性,该模式的最大平均群指数可达178左右.利用时域有限差分法记录了不同时刻电场强度在边界附近的分布及监测点处的电场幅度变化情况,结果表明,两类模式都能够被限制在边界附近并向前传播,时域有限差分法得到的群速度与平面波展开法的结果完全吻合.     

Light-Driven Crawling of Molecular Crystals by Phase-Dependent Transient Elastic Lattice Deformation

The light-driven crawling of a molecular crystal that can form three phases, (α, β, and γ) is presented. Laser irradiation of the molecular crystal can generate phase-dependent transient elastic lattice deformation. The resulting elastic lattice deformation that follows scanning irradiation of a laser can actuate the different phases of molecular crystal to move with different velocity and direction. Because the γ phase has a large Young's modulus (ca. 26 GPa), a force of 0.1 μN can be generated under one laser spot. The generated force is sufficient to actuate the γ-formed molecular crystals in a wide dimensional range to move longitudinally at a velocity of about 60 μm min⁻¹, which is two orders of magnitude faster than the α and β phases.     

Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam

Dynamic fracture in single-edge notched polymethyl-methacrylate (PMMA) beams have been investigated by three-point-bending impact testing with a drop-weight machine. A high-speed camera combined with the digital image correlation (DIC) method is used to capture the impact-induced crack initiation and propagation, as well as the beam deformation fields and the open mode strain at the original notch tip. The crack propagation length is recorded and the instantaneous crack velocity is calculated. Furthermore, the dynamic fracture toughness K_Id is quantified from the loading-displacement relations at different impact velocities. The effects of the impact velocity and impact energy on dynamic fracture toughness, fracture initiation strain, as well as the corresponding influences on the fracture propagation velocity, are discussed.     

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

This paper investigated the effect of Gaussian distribution width, average particle diameter, particle loading, and the tapered angle on minimum fluidization velocity (U_mf) by conducting extensive experiments in tapered fluidized beds. Three powders with Gaussian size distribution and different distribution widths were used in the experiments. An increase in U_mf with increasing the average particle diameter, particle loading, and the tapered angle was observed. There was also a nonmonotonic behavior of U_mf as the Gaussian distribution width increased. An empirical correlation including dimensionless groups for predicting U_mf in tapered beds was developed in which the effect of distribution width was considered. The proposed correlation predictions were in good agreement with the experimental data, with a maximum deviation of 16.5% and average and standard deviations of, respectively, 6.4% and 7.4%. The proposed correlation was also compared with three earlier models, and their accuracy was discussed.     

异地时钟同步与时间的度量

介绍了庞加莱等人关于"异地时钟同步"和"相继时间段(绵延)相等"的思考,介绍了爱因斯坦"约定"异地时钟"同时"的方案,以及朗道等人对该方案的发展.我们赞同庞加莱的设想,即对光速传播性质的约定是时间测量的基础,并指出对光速的约定相当于对时空对称性的约定.我们在"约定光速的基础上"给出了钟速同步具有传递性的条件,不仅解决了"异地坐标钟钟速同步"的定义问题,而且解决了"相继时间段相等"的定义问题,证实了庞加莱原初的猜想,简化了时间测量的理论基础.     

水平管段塞流持液率波动规律研究

以空气和水为工质,采用双平行电导探针,在水平多相流环道(d=50.00mm)中研究了段塞流持液率与压力波动的关系以及折算气速、折算液速变化对持液率的影响,并将持液率的试验值与预测模型进行了比较.结果表明:持液率波动能更真实地反映段塞流动特性,可以用来确定液塞频率;增加折算气速时,液塞持液率减小;增加折算液速时,持液率增大.