Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

Electrical conductivity,impedance, and percolation behavior of carbon nanofiber and carbon nanotube containing gellan gum hydrogels

The electrical impedance behavior of gellan gum (GG), GG–carbon nanotube, and GG–carbon nanofiber hydrogel composites is reported. It is demonstrated that the impedance behavior of these gels can be modeled using a Warburg element in series with a resistor. Sonolysis (required to disperse the carbon fillers) does not affect GG hydrogel electrical conductivity (1.2 ± 0.1 mS/cm), but has a detrimental effect on the gel's mechanical characteristics. It was found that the electrical conductivity (evaluated using impedance analysis) increases with increasing volume fraction of the carbon fillers and decreasing water content. For example, carbon nanotube containing hydrogels exhibited a six‐ to sevenfold increase in electrical conductivity (to 7 ± 2 mS/cm) at water content of 82%. It is demonstrated that at water content of 95 ± 2% the electrical behavior of multiwalled nanotube containing hydrogels transitions (percolates) from transport dominated by ions (owing to GG) to transport dominated by electrons (owing to the carbon nanotube network). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 864–871     

瓜胶/聚丙烯酸互穿聚合物网络水凝胶对模型药物的负载与控制释放

考察了以牛乳清蛋白(BSA)为模型药物,通过相平衡分配法制备载药瓜胶(GG)/聚丙烯酸(PAA)互穿聚合物网络(IPN)水凝胶的工艺条件.借助紫外可见光谱仪研究了载药水凝胶在结肠酶存在下的控制释放行为.结果表明:载药容量(CM)随瓜胶、丙烯酸用量的增加而下降,半IPN水凝胶的Cm较全IPN的略大;结肠酶能明显提高半IPN与全IPN中的BSA释放速率,且提高幅度随GG含量的增加而加快,GG/PAA IPN水凝胶具有结肠定位降解的特性,有望成为靶向结肠给药的理想载体材料.     

Development of sterculia gum based wound dressings for use in drug delivery

The present study deals with the modification of sterculia gum to develop the novel wounds dressing for the delivery of antimicrobial agent (tetracycline hydrochloride). The sterculia crosslinked PVA (sterculia-cl-PVA) hydrogels were characterized by FTIR and swelling studies. For the evaluation of swelling and drug release mechanism, the swelling kinetics and in vitro release dynamics of model drug from this matrix were studied in solution of different pH and simulated wounds fluid. Per gram of polymer has taken (8.3 ± 0.1) g of simulated wounds fluid and has released (0.820 ± 0.6) mg of drug in the simulated fluid. The value of the ‘n’ (0.84) indicates the non-Fickian diffusion mechanism for the release of drug in simulated fluids.     

Synthesis,characterization, and hoping transport properties of HCl doped conducting biopolymer‐co‐polyaniline zwitterion hybrids

A series of electrically conductive zwitterion hybrid materials were facilely synthesized with anionic acacia gum (AG) and cationic HCl doped polyaniline (PANI) through radical copolymerization method. A representative acacia gum‐polyaniline hybrid (AG‐PANI) was characterized using UV‐vis, FTIR, ¹H NMR, and SEM. HCl doped AG‐PANI possesses zwitterion character due to the presence of NH on PANI and ? COO^? of AG. The cyclic voltammogram of AG‐PANI showed three anodic peaks at 0.20 V, 0.58 V, and 0.64 V along with two cathodic peaks at 0.50 V and 0.40 V with large capacitive background currents. AG‐PANI exhibited electrical conductivity that was found dependent on the ratio of aniline to AG, temperature, and pH. Its electrical conductivity versus temperature plot indicated Mott's nearest‐neighbor hopping mechanism at the temperature range 83–323 K. The hybridization of AG and PANI yielded eco‐friendly advanced functional materials for technological applications. Copyright © 2008 John Wiley & Sons, Ltd.     

PSY-g-PAA/Na-MMT复合高吸水性树脂的制备及其对Cu2+的吸附

以欧车前胶(PSY)、丙烯酸(AA)和钠基蒙脱土(Na-MMT)为原料,过硫酸铵(APS)为引发剂,N,N'-亚甲基双丙烯酰胺(MBA)为交联剂,采用水溶液聚合法制备了欧车前胶接枝聚丙烯酸/钠基蒙脱土(PSY-g-PAA/Na-MMT)复合高吸水性树脂.考察了Na-MMT质量分数对复合高吸水性树脂吸水能力和Cu2+吸附...     

Single‐walled Carbon Nanotube Strings for Biosensor Development

Strings of single‐walled carbon nanotubes (SWCNT) were prepared using an aqueous dispersion of gellan gum wrapped nanotubes and crosslinked using Ca²⁺ ions. Various formulations were evaluated to determine the parameters for successful string formation; these included 8–12 % nanotube by weight, 60–70 % gellan gum, and 20–30 % KCl. Strings showed electrical conductivity when dried between ITO electrodes. Conductivity variations were observed and potential sources of the variation identified. Proteins were attached to the carbon nanotube strings with peroxidase enzymatic activity detected following horseradish peroxidase attachment. This work provides a basis for development of electronic biosensors based on these carbon nanotube strings.     

Hydrophobic guar gum derivatives prepared by controlled grafting processes

Introduction of polyalkoxyalkyleneamide grafts to guar gum produces a new water soluble guar derivative. Modification of either guar gum or hydroxyopropyl guar is achieved in a three‐step process: carboxymethylation with sodium chloroacetate, esterification with dimethyl sulfate (DMS) and amidation with a series of polyalkoxyalkyleneamines. The process was followed using infrared spectroscopy; the grafted guar derivatives were characterized using ¹H NMR. A series of hydroxypropyl guar (HPR) derivatives with degrees of carboxymethylations ranging from 0.2–0.3 were modified with polyalkoxyalkyleneamines with molecular weights ranging from 300 to 3000. The ratio of oxypropylene to oxoethylene units in the polyalkoxyalkyleneamines was varied from 9/1 to 8/58 to adjust the hydrophobicity of the grafts. Aqueous solutions of the graft copolymers exhibit viscosities one to two orders of magnitude lower than the corresponding solutions of the parent guar gum. Copyright © 2007 John Wiley & Sons, Ltd.     

Graft copolymerisation of acrylamide onto cashew gum

The synthesis of cashew gum-g-polyacrylamide was carried out at 60 °C by a radical polymerisation using potassium persulphate as the redox initiator under N₂ atmosphere. A series of graft copolymers, varying in acrylamide concentration and keeping the concentration of the initiator and polysaccharide constant, was prepared. These graft copolymers were characterised by elemental analysis, infrared and ¹³C NMR spectroscopy, rheological studies, differential scanning calorimetry and thermogravimetric analysis. Comparisons amongst grafting parameters of the reaction of various natural polysaccharides with polyacrylamide (PAM) were carried out. High percentages of acrylamide conversion (%C) and grafting efficiency (%E) were obtained for cashew gum (CG), even with a low acrylamide/gum ratio. All copolymers had intrinsic viscosity and thus the hydrodynamic volume much higher than the CG value and closer to the PAM. The CG-g-PAM solution had an absolute viscosity at 2.5% concentration (wt./vol.) up to 33 and 3.3 times the CG and PAM values, respectively. Grafting of PAM chains onto the polysaccharide enhances its thermal stability.