The displacement efficiency and rheology of welan gum for enhanced heavy oil recovery

The displacement efficiency of welan gum on enhanced heavy oil recovery has been investigated by comparing that of xanthan gum which is commonly used for polymer flooding, and it is found that the displacement efficiency of biopolymer welan gum is higher (>7.0 % at the normal permeability) than that of xanthan gum. In‐depth rheological investigations show that both storage modulus and loss modulus of welan gum solution are higher than those of xanthan gum solutions at the same concentration, temperature and salinity. The higher displacement efficiency for enhanced heavy oil recovery by welan gum is mainly caused by its stronger ability to form aggregates. Although the molecular weight of welan gum is lower than that of xanthan gum, the aggregates of welan gum molecules help to improve the sweep efficiency. It is proposed that welan gum improves oil recovery by drawing and dragging on the residual oils which is derived from the interlinked network structures formed by the adjacent double helices in the arrangement of the zipper model. The intermolecular structures formed by zipper model are stable in high temperature and high salinity condition. Copyright © 2014 John Wiley & Sons, Ltd.     

真丝针织浸渍工艺的研究

通过浸渍剂HV301和太古油处理后生丝的物理性能的测定，探讨分析了它们对生丝的作用原理，并提出浸渍剂HV301的优越性和可用性，通过HV301浸渍工艺的正交试验，采用计算机处理找出了最佳的工艺参数。研究结果对真丝在针织实际生产中提高效率、保证质量、降低成本有一定的参考价值。     

Rheological and drag reduction characteristics of xanthan gum solutions

The rheological and turbulent drag reducing characteristics of commercial and purified xanthan gum solutions of concentrations 50–500 ppm have been studied with and without addition of 100 ppm NaCl. The purification by soxlet extraction of xanthan gum using 95% ethanol is effective in removing low-molecular-weight impurities from xanthan. The increased content of higher molecular-weight xanthan in purified xanthan is evident from rheological and drag reduction behavior. The addition of 100 ppm salt to dilute solutions introduces semi-flexibility in xanthan gum solution without occurrence of self-association. The change in molecular behavior in the presence of salt is evident from rheological normal-stress and turbulent drag reduction behaviors.     

Application of analytical pyrolysis for the characterisation of old inks

In the last years particular attention has been dedicated to the analysis of iron-gall inks for their effects on the degradation of paper. Mainly spectroscopic techniques devoted to the determination of iron have been studied, while a minor attention has been dedicated to the organic components.

In this study we propose THM pyrolysis as a rapid tool for the characterisation of inks organic component. The method was applied on several standards and on original samples showing that it is suitable for the characterisation of iron gall and sepia inks. Moreover, information on the organic binder may also be achieved at the same time.     

生物高分子黄原胶的性能、应用与功能化

讨论了黄原胶生物大分子的结构与性能关系，从有关黄原胶的性能、开发应用以及在抗菌素药物负载与控择、分散稳定与防腐作用，及其与有机硅化合物配伍制备消泡表面活性材料等，进行功能化改性方面，综述了近20年来国内外研究状况，并探讨了开展生物高分子黄原胶应用与开发研究的思路。     

黄原胶和瓜尔胶混合溶液及其硼砂交联体系的流变性能

本文研究了黄原胶(XG)和瓜尔胶(GG)的混合溶液及其硼砂(B)交联体系的流变性,考察了XG/GG间的“协同增效作用”以及溶液组成、pH和电解质(NaCl和CaCl 2)对其流变性的影响。结果表明,所有溶液体系均为假塑型流体,其流变曲线可用Herschel-Bulkley和Casson模型描述。XG和GG复配具有明显的“协同增粘效应”,在XG占两聚合物的质量分数w(XG)为20%和90%时协同增粘效应最强,其“协同增粘率”(R m)分别约为42%和34%。硼砂(B)可交联XG/GG混合溶液,其交联增粘效果随w(XG)的减小和硼砂质量浓度ρ(B)的增大而增大;在w(XG)=50%和ρ(B)=1.00 g/L时,“交联增粘率”可达85%。在所研究的pH值范围(6.2~10.0)内,XG/GG混合溶液的流变性基本无变化,而XG/GG/B交联体系(w(XG)=50%和ρ(B)=0.75~1.00 g/L)的表观粘度随pH值增大先升高后降低,pH=9.0时出现最大值,交联增粘率达107%。电解质可使XG/GG/B交联溶液(w(XG)=10%和ρ(B)=0.50 g/L)体系的粘度大幅下降,且CaCl 2的影响明显高于NaCl,表明交联结构的耐盐能力较差。这些结果加深了对XG/GG混合溶液流变性的认识,可为其实际应用(如在强化采油中的应用)提供依据。     

Sol–gel polycondensation of tetraethoxysilane in ethanol in presence of vinyl modified guar gum: synthesis of novel nanocompositional adsorbent materials

Novel nanocomposite adsorbent materials were synthesized by condensation polymerization of TEOS in the presence of saponified guar-graft-poly(acrylonitrile) (SG) as template. The effect of changing the molecular size of SG on the final properties of the composite materials was investigated in this paper. The composites were thermally treated at temperatures ranging from 80 to 1100 °C, to obtain materials of different performance. The chemical, structural and textural characteristics of the composites were determined by FTIR, XRD, TGA-DSC and SEM studies. Their adsorption properties were monitored in terms of Zn (II) binding capacity which could be tailored by changing the template size and sintering temperature. The adsorption capacity of the composite at room temperature was enhanced five times when thermally treated at 900 °C with a maximum adsorption of 3.58 meq/g of the zinc (II). The adsorption could be further optimized to higher values and the materials could be successfully recycled for three consecutive cycles without any significant loss in the adsorption capacity.     

Syntheses and properties of superabsorbent composites based on natural guar gum and attapulgite

Utilization of raw materials available in nature and their application to derive other useful products without any adverse impact on the environment has long been a desired goal. In this work, guar gum (GG) and attapulgite (APT) clay were used as raw materials for preparing guar gum‐g‐poly(acrylic acid)/attapulgite (GG‐g‐PAA/APT) superabsorbent composites through the graft copolymerization of GG, partially neutralized acrylic acid (AA) and APT in aqueous solution. The effects of reaction conditions such as concentrations of the initiator and crosslinker, APT content, etc. on water absorbency were investigated. The composite prepared under optimal conditions gave the best absorption of 529 g/g sample in distilled water and 61 g/g sample in 0.9 wt% NaCl solution. Swelling behaviors revealed that the superabsorbent composites retained a high water absorbency over a wide pH range of 4–11, and the developed composites also exhibited improved reswelling and water‐retention capabilities. The superabsorbent composites can be utilized as eco‐friendly water‐manageable materials for agricultural and horticultural applications. Copyright © 2008 John Wiley & Sons, Ltd.     

E-beam radiation synthesis of xanthan-gum/carboxymethylcellulose superabsorbent hydrogels with incorporated graphene oxide

In this study the electron beam (e-beam) radiation synthesis in “paste-like condition” and characterization of the network structure of acrylic acid (AA) sodium salt/xanthan gum (XG)/carboxymethylcellulose (CMC) superabsorbent hydrogels incorporating graphene oxide (GO) was investigated. The effects of the AA concentration on gel fraction, sol-gel analysis, swelling degree and network parameters, as well as the relationship between these parameters and radiation dose was also established.

Gel fraction exceeds 90%, and the p₀/q₀ ratio shows a moderate degradation process. The swelling kinetic data were used to determine, first the swelling degree, second the diffusion characteristics, and third the average molecular weight between crosslinks (Mc), as well as. The diffusion data revealed a Fickian mechanism transport, for each hydrogel compositions. The network parameters (Mc and ξ) increased with absorbed dose, while cross-linking density and the radiation-chemical yields were decreased.     

Formulation characterization and in vitro evaluation of acacia gum–calcium alginate beads for oral drug delivery systems

In the present work, new matrix bead formulations based on linear and branched polysaccharides have been developed using an ionic gelation technique, and their potential use as oral drug carriers has been evaluated. Using calcium chloride as a cross‐linking agent and sodium diclofenac (SD), as a model drug, acacia gum–calcium alginate matrix beads were formulated. The response surface methodology based on 3² factorial design was used as a statistical method to evaluate and optimize the effects of the biopolymers‐blend ratio and the concentration of calcium chloride on the particle size (mm), density (g/cm³), drug encapsulation efficiency (%), and the cumulative drug release after 8 hours (R_8h,%). The optimized beads with the highest drug encapsulation efficiency were examined for a drug‐excipients compatibility by powder X‐ray diffraction, differential scanning calorimetry, thermo‐gravimetric analysis, and Fourier transform‐infrared spectroscopy analyses. The swelling and degradation of the matrix beads were found to be influenced by the pH of medium. Higher degrees of swelling were observed in intestinal pH than in stomach pH. Accordingly, the drug release study showed that the amount of SD released from the acacia gum–calcium alginate beads was higher in intestinal pH than in stomach pH. Therefore, the in vitro drug release from the SD‐loaded beads appears to follow the controlled‐release (Hixson‐Crowell) pattern involving a case‐2 transport mechanism operated by swelling and relaxation of the polymeric blend matrix.