通过S2-中间态将CdSe量子点有机配体转化为ZnS保护层及其器件光伏特性

通过S2-中间态将有机配体三辛基氧膦(TOPO)转化为ZnS保护层,显著改善了CdSe量子点(QDs)器件的转换效率.配体交换后的傅里叶变换红外(FTIR)光谱结果表明,有机配体已被S2-离子配体取代;离子反应后的X射线光电子能谱(XPS)结果表明S2-离子配体反应生成了ZnS,紫外-可见(UV-Vis)吸收光谱结果表明量子点溶液吸收峰位没有发生明显改变,透射电子显微镜(TEM)结果表明配体交换后量子点粒径减小.电化学阻抗谱(EIS)结果表明光照条件下有机配体转化为ZnS保护层后TiO2/QDs/电解质界面电阻减少,证明该条件下正向电子传输增强;强度调制光电压谱(IMVS)和强度调制光电流谱(IMPS)结果表明电子寿命和扩散速度增加.相比于有机配体,形成ZnS保护层后的量子点敏化太阳能电池(QDSC)效率由0.98%提高到1.75%,相对提高了1.78倍.     

Spectral luminescence properties of Eu(III) complexes with tetracycline antibiotics and hydrogen peroxide

We have studied the spectral luminescence properties of mixed-ligand complexes of Eu(III) ions with tetracyclines and hydrogen peroxide. We have established that incorporation of hydrogen peroxide into the inner sphere of these complexes leads to a significant increase (by a factor of 10–25) in the intensity of luminescence of the Eu(III) ions, redistribution of the intensities of the ⁵D₀ → ⁷F_j transitions, in particular to an anomalous increase in the intensity of the band for the forbidden transition ⁵D₀ → ⁷F₀. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 310–314, May–June, 2007.     

Sensitized photomodification of oligonucleotide-binding proteins displayed on the eucaryotic cell surface

Interactions of double-stranded nucleic acids with cell surface proteins, which are involved in binding and transport of extracellular nucleic acids, were studied by the photoaffinity modification with a binary system of oligonucleotide conjugates. The photoreactive double-stranded complex involved an oligonucleotide template and two complementary to adjacent sequences oligonucleotide conjugates. One conjugate contained a photoreagent, viz., 4-azido-2,3,5,6-tetrafluorobenzaldehyde N-(3-aminopropionyl)hydrazone, at the terminus located in proximity to the terminus of another conjugate containing the sensitizer, viz., 9-aminomethylanthracene. Binding of photoreagent and the sensitizer to a single-stranded template yields the photoreactive center. Upon irradiation with visible light (400—580 nm), this photoreactive double-stranded complex forms covalent cross-linkages with oligonucleotide-binding surface proteins of eucaryotic SPEV cells.     

Novel D − π − A dye sensitizers of polymeric metal complexes based on 8‐hydroxyquinoline and phenylethyl or fluorene units: synthesis,characterization and photovoltaic applications for dye‐sensitized solar cells

Four novel donor ? π‐bridge ? acceptor (D ? π ? A) polymeric metal complexes (P1–P4) based on 8‐hydroxyquinoline metal complexes were synthesized and tested for their performance in dye‐sensitized solar cells (DSSCs). The polymeric metal complexes dyes use alkoxy benzene or alkyl fluorene as the electron donor and C=C as π linker; the 8‐hydroxyquinoline derivative complex part was used as the electron acceptor and diaminomaleonitrile was used as ancillary ligand. The two strongly electron‐withdrawing cyano groups in the polymer structure can provide an efficient charge transport in the intramolecular between donor and acceptor parts. The thermal, photophysical, electrochemical and photovoltaic properties of these copolymers were investigated by TGA, differential scanning calorimetry, cyclic voltammetry and cureent density‐voltage curves, and the results showed that dye containing complex Zn(II) and alkoxy benzene unit benefited the generation of photocurrent and open‐circuit voltages, and a maximum power conversion efficiency of 1.91% (P2) was obtained, with an open‐circuit voltage of 0.71 V, a short‐circuit current density of 4.23 mA cm^?2, and a fill factor of 38.6% under AM1.5G irradiation. The study results also show that the four polymers exhibit good thermal stability, indicating that these polymeric metal complexes are suitable for the fabrication processes of optoelectronic devices. Copyright © 2013 John Wiley & Sons, Ltd.     

铜锌锡硫的合成及其光电应用

铜锌锡硫(CZTS)半导体常作为对电极材料被应用于量子点敏化太阳能电池(QDSCs)中,然而效率一直低于4%。本文采用热注入法合成出纳米尺寸的CZTS并制成对电极(CZTS/FTO),用其组装的CdSe QDSCs和CdSeTe QDSCs的效率(PCE)分别达到了5.75%和7.64%。电化学阻抗谱、塔菲尔极化等表征证明电池效率的提高与CZTS良好的导电性及催化活性联系密切。     

Design of high‐performance chlorine type dyes for dye‐sensitized solar cells

Intrinsic defect of electronic structure for the chlorine‐type porphyrin 1, which was synthesized for use in dye‐sensitized solar cell (DSSC), is found by theoretical calculation including density functional method (DFT), time‐dependent DFT, and C+/C? function. It is believed that the limited cell performance obtained by using dye 1 as the sensitizer is due to the existence of this electronic defect. To avoid this defect, a series of novel molecules with electron deficient π bridge were designed. The subsequent theoretical calculation indicated that the electron deficient π bridge in the newly designed molecule is quite effective in offsetting the electronic defect observed for dye 1. The parameters for the designed molecules closely associated with open‐circuit voltage and short‐circuit current density including dipole moment of dye vertical to the surface of semiconductor and light‐harvesting efficiency were then evaluated. By comparing these parameters of designed dyes with those of dye 1, we can predict that the DSSC based on dye 4 (2, 6‐cyan benzoic acid as anchoring group) should possess enhanced performance, which would be a valuable theoretical guidance for the practical work. © 2013 Wiley Periodicals, Inc.     

Recent Progress and Emerging Applications of Rare Earth Doped Phosphor Materials for Dye‐Sensitized and Perovskite Solar Cells: A Review

Although the efficiency of Dye‐sensitized and Perovskite solar cell is still below the performance level of market dominance silicon solar cells, in last few years they have grabbed significant attention because of their fabrication ease using low‐cost materials, and henceforth these cells are considered as a promising alternative to commercial photovoltaic devices. However, third generation solar cells have significant absorption in the visible region of solar spectrum, which confines their power conversion efficiency. Subsequently, the performance of current photovoltaics is significantly hampered by the transmission loss of sub‐band‐gap photons. To overcome these issues, rare earth doped luminescent materials is the favorable route followed to convert these transmitted sub‐band‐gap photons into above‐band‐gap light, where solar cells typically have significant light‐scattering effects. Moreover, the rare earth based down/up conversion material facilitates the improvement in sensitization, light‐scattering and device stability of these devices. This review provides insight into the application of various down/up conversion materials for Dye‐sensitized and perovskite solar cell applications. Additionally, the paper discusses the techniques to improve the photovoltaic performance in terms of current density and photo voltage in detail.     

Platinum‐Free Binary Co‐Ni Alloy Counter Electrodes for Efficient Dye‐Sensitized Solar Cells

Dye‐sensitized solar cells (DSSCs) have attracted growing interest because of their application in renewable energy technologies in developing modern low‐carbon economies. However, the commercial application of DSSCs has been hindered by the high expenses of platinum (Pt) counter electrodes (CEs). Here we use Pt‐free binary Co‐Ni alloys synthesized by a mild hydrothermal strategy as CE materials in efficient DSSCs. As a result of the rapid charge transfer, good electrical conduction, and reasonable electrocatalysis, the power conversion efficiencies of Co‐Ni‐based DSSCs are higher than those of Pt‐only CEs, and the fabrication expense is markedly reduced. The DSSCs based on a CoNi_0.25 alloy CE displays an impressive power conversion efficiency of 8.39 %, fast start‐up, multiple start/stop cycling, and good stability under extended irradiation.