Novel iridium complex with carboxyl pyridyl ligand for dye-sensitized solar cells: High fluorescence intensity, high electron injection efficiency?

Novel iridium-based sensitizers Iridium(III) bis[2-phenylpyridinato-N,C^2′]-5-carboxylpicolinate) (Ir1), Iridium(III) bis[2-(naphthalen-1-yl) pyridinato-N,C^2′]-5-carboxyl-picolinate) (Ir2), Iridium(III) bis[2-phenylpyridinato-N,C^2′]-4,4′-(dicarboxylicacid)-2,2′-bipyridine (Ir3) were synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. By changing the ligand, the absorption spectra can be extended and molar extinction coefficient was enhanced. The dye-sensitized nanocrystalline TiO₂ solar cells (DSSCs) based on dye Ir3 showed the best photovoltaic performance: a maximum monochromatic incident photon-to-current conversion efficiency (IPCE) of 85%, a short-circuit photocurrent density (J_sc) of 9.59 mA cm⁻², an open-circuit photovoltage (V_oc) of 0.552 V, and a fill factor (ff) of 0.54, corresponding to an overall conversion efficiency of 2.86% under AM 1.5 sun light. Moreover, the HOMO and LUMO energy levels tuning can be conveniently accomplished by alternating the ligand. The high oxidative potential of Ir3 enables it to be used along with redox electrolyte and the photovoltage was found to be enhanced greatly.     

Organophotocatalytic Aerobic Oxygenation of Phenols in a Visible-Light Continuous-Flow Photoreactor

A mild photocatalytic phenol oxygenation enabled by a continuous-flow photoreactor using visible light and pressurized air is described herein. Products for wide-ranging applications, including the synthesis of vitamins, were obtained in high yields by precisely controlling principal process parameters. The reactor design permits low organophotocatalyst loadings to generate singlet oxygen. It is anticipated that the efficient aerobic phenol oxygenation to benzoquinones and p-quinols contributes to sustainable synthesis.     

Stereoselective [4+2] Cycloaddition of Singlet Oxygen to Naphthalenes Controlled by Carbohydrates

Stereoselective reactions of singlet oxygen are of current interest. Since enantioselective photooxygenations have not been realized efficiently, auxiliary control is an attractive alternative. However, the obtained peroxides are often too labile for isolation or further transformations into enantiomerically pure products. Herein, we describe the oxidation of naphthalenes by singlet oxygen, where the face selectivity is controlled by carbohydrates for the first time. The synthesis of the precursors is easily achieved starting from naphthoquinone and a protected glucose derivative in only two steps. Photooxygenations proceed smoothly at low temperature, and we detected the corresponding endoperoxides as sole products by NMR. They are labile and can thermally react back to the parent naphthalenes and singlet oxygen. However, we could isolate and characterize two enantiomerically pure peroxides, which are sufficiently stable at room temperature. An interesting influence of substituents on the stereoselectivities of the photooxygenations has been found, ranging from 51:49 to up to 91:9 dr (diastereomeric ratio). We explain this by a hindered rotation of the carbohydrate substituents, substantiated by a combination of NOESY measurements and theoretical calculations. Finally, we could transfer the chiral information from a pure endoperoxide to an epoxide, which was isolated after cleavage of the sugar chiral auxiliary in enantiomerically pure form.     

基于量子点涂料的柔性光阳极及碳基对电极的制备和优化

首先制备出量子点(QDs)/TiO_2涂料,分别采用丝网印刷法与刀刮法将涂料涂覆于ITO/PET柔性基底上,结果表明刀刮法制备量子点敏化太阳电池(QDSCs)效果更佳,且具有普适性。基于铜片对电极所组装的ZnCuInSe,CdSe和CdSeTe量子点半柔性QDSCs最高效率分别达2.83%,2.46%和1.99%。另外,我们对石墨纸进行表面化学修饰以提高亲水性,再通过简单的连续离子交换吸附法(SILAR)在石墨纸上负载Cu_xS纳米粒子,制备出Cu_xS/GP柔性对电极,进一步组装成全柔性QDSCs,获得了2.13%光电转化效率。     

Dye‐Controlled Interfacial Electron Transfer for High‐Current Indium Tin Oxide Photocathodes

Efficient sensitized photocathodes are highly desired for solar fuels and tandem solar cells, yet the development is hindered by the scarcity of suitable p‐type semiconductors. The generation of high cathodic photocurrents by sensitizing a degenerate n‐type semiconductor (tin‐doped indium oxide; ITO) is reported. The sensitized mesoporous ITO electrodes deliver cathodic photocurrents of up to 5.96±0.19 mA cm^?2, which are close to the highest record in conventional p‐type sensitized photocathodes. This is realized by the rational selection of dyes with appropriate energy alignments with ITO. The energy level alignment between the highest occupied molecular orbital of the sensitizer and the conduction band of ITO is crucial for efficient hole injection. Transient absorption spectroscopy studies demonstrate that the cathodic photocurrent results from reduction of the photoexcited sensitizer by free electrons in ITO. Our results reveal a new perspective toward the selection of electrode materials for sensitized photocathodes.     

Combining Electron‐Accepting Phthalocyanines and Nanorod‐like CuO Electrodes for p‐Type Dye‐Sensitized Solar Cells

A route is reported for the synthesis of two electron‐accepting phthalocyanines featuring linkers with different lengths as sensitizers for p‐type dye‐sensitized solar cells (DSSCs). Importantly, our devices based on novel nanorod‐like CuO photocathodes showed high efficiencies of up to 0.191 %: the highest value reported to date for CuO‐based DSSCs.     

Ru‐doped TiO2 nanotubes: Improved performance in dye‐sensitized solar cells

In the present work we use a series of Ti–Ru alloys, with minor amounts of Ru (0.01, 0.02, 0.05 and 0.2 at%) to grow anodic self‐organized Ru‐doped TiO₂ nanotube layers. When used in dye‐sensitized solar cells (DSSCs), the nanotube layers with an optimum amount of Ru (0.02 at% Ru in the alloy) show a considerable increase in solar cell efficiency (η = 5.2%) under AM1.5 (100 mW/cm²) conditions compared with non‐doped TiO₂ nanotubes (η = 4.3%).

     

重铬酸盐明胶反射全息图的波长调节新技术研究

介绍了一种采用有机预膨胀剂调节李普曼反射全息图再现波长的新方法. 将水溶性的有机试剂丙稀酰胺作为预膨胀剂均匀加入亚甲基蓝敏化的重铬酸盐明胶（MBDCG）溶液中来制作全息干板,预膨胀剂在反射全息图的后处理阶段溶于水,明胶层发生均匀收缩,从而使再现波长向短波方向移动. 通过控制丙稀酰胺浓度,可在整个可见光区大范围定量控制再现波长.     

测定染料增感峰的一个简便方法

卤化银乳剂经晶体生长、水洗、化学增感以后,还必须进行光谱增感,即加入感绿和感红的染料,以扩大卤化银乳剂微晶体对绿光和红光的光谱响应范围.