Rheology of a mixture of liquid-crystal polymers in solution

The rheological behavior of a mixture of two liquid-crystal polymers, hydroxypropyl cellulose and ethyl cellulose, in acetone solution is studied. The total polymer concentration in the solvent is held constant (40%) as the ratio of the two polymers is varied. The mixtures are anisotropic, isotropic, or biphasic (isotropic/anisotropic), depending on the concentration. Curves of viscosity vs shear rate for all the mixtures studied show three regions of viscosity, as described by Onogi and Asada for liquid-crystal polymers. The viscosity as a function of the weight ratio of the two polymers at constant shear rate exhibits deviations from additivity of viscosities of the two components at all concentrations. In mixtures of two polymers in the melt, deviations are also observed; the negative ones are attributed to phase separation and the positive ones to homogenous mixing (comparison with the phase diagram). All the mixtures studied (anisotropic, isotropic, or biphasic), show ranges of shear rates where the first normal-stress difference is negative, as is generally observed for anisotropic liquid-crystal polymers. It is concluded that the isotropic solutions become anisotropic under shear, as they are not far from the critical concentration. © 1994 John Wiley & Sons, Inc.     

Phenol biosensor based on electrochemically controlled integration of tyrosinase in a redox polymer

An amperometric biosensor for the detection of phenolic compounds was developed based on the immobilization of tyrosinase within an Os-complex functionalized electrodeposition polymer. Integration of tyrosinase within the redox polymer assures efficient catechol recycling between the enzyme and the polymer bound redox sites. The non-manual immobilization procedure improves the reproducibility of fabrication process, greatly reduces the desorption of the enzyme from the immobilization layer, and, most importantly prevents fast inactivation of the enzyme by its substrate due to fast redox cycling. A two-layer sensor architecture was developed involving ascorbic acid oxidase entrapped within an electrodeposition polymer in a second layer on top of the redox polymer/tyrosinase layer. Using this sensor architecture it was possible to eliminate the current interference arising from direct ascorbate oxidation up to a concentration of 630 μM ascorbic acid. The effects of the polymer thickness, the enzyme/polymer ratio, and the applied potential were evaluated with respect to optimal sensor properties. The sensitivity of the optimized sensors for catechol was 6.1 nA μM⁻¹ with a detection limit of 10 nM, and for phenol 0.15 nA μM⁻¹ with a detection limit of 100 nM.     

Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

高压下某些导电高分子色散关系的研究

利用晶格动力学方法,研究在高压下几种导电高分子具有不同晶格链时的色散关系及其曲线的变化.链间耦合作用的减弱使横波与纵波的ω差值相应增大,且在BZ边界处拉开一个间隙,这是维度作用的结果.     

修饰聚合物液-固亲和萃取体系纯化大豆中的组氨酸

聚乙二醇(PEG)6000经亚氨基二乙酸(IDA)修饰后和CuSO4反应,形成PEG修饰聚合物PEG-(IDA-Cu)2 ,与吐温80、磷酸盐混合,构成液-固亲和萃取体系,直接从大豆蛋白匀浆中提取氨基酸.选定萃取条件为磷酸盐摩尔比n(K2HPO4)∶n(NaH2PO4)为4.8∶1,体系pH值 7.70,总盐浓度为1.60 mol·L-1;吐温80的体积分数为10.5%.结果表明该体系对大豆蛋白匀浆中氨基酸的二次萃取率为66.5%,用离子交换技术后继处理,得纯度较高的组氨酸.     

Hydrogel‐like elastic membrane consisting of semi‐interpenetrating polymer networks based on a phosphorylcholine polymer and a segmented polyurethane

To obtain a hydrogel‐like elastic membrane, we prepared semi‐interpenetrating polymer networks (IPNs) by the radical polymerization of methacrylates such as 2‐methacryloyloxyethyl phosphorylcholine (MPC), 2‐hydroxyethylmethacrylate, and triethyleneglycol dimethacrylate diffused into segmented polyurethane (SPU) membranes swollen with a monomer mixture. The values of Young's modulus for the hydrated semi‐IPN membranes were less than that for an SPU membrane because of higher hydration, but they were much higher than that for a hydrated MPC polymer gel (non‐SPU). According to a thermal analysis, the MPC polymer influenced the segment association of SPU. The diffusion coefficient of 8‐anilino‐1‐naphthalenesulfonic acid sodium salt from the semi‐IPN membrane could be controlled with different MPC unit concentrations in the membrane, and it was about 7 × 10² times higher than that of the SPU membrane. Fibroblast cell adhesion on the semi‐IPN membrane was effectively reduced by the MPC units. We concluded that semi‐IPNs composed of the MPC polymer and SPU may be novel polymer materials possessing attractive mechanical, diffusive‐release, and nonbiofouling properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 68–75, 2003     

Crystallographic report: Crystal structure of a one‐dimensional zinc(II) coordination polymer containing 4,4′‐biphenyldicarboxylate hemihydrate

A one‐dimensional zinc(II) coordination polymer has been constructed from zinc(II), 4,4′‐biphenyldicarboxylate and pyridine in which each zinc(II) atom is coordinated by two pyridine ligands and two monodentate 4,4′‐biphenyldicarboxylate ligands that define a distorted tetrahedral geometry. Copyright © 2003 John Wiley & Sons, Ltd.     

无机纳米粒子作为生物探针在生物分析中的研究进展

介绍了无机纳米粒子在生物分析领域的研究进展分别从生物分子与纳米粒子的耦联方式、检测生物分子的纳米金探针、核酸或蛋白质修饰的其它纳米探针以及生物纳米技术的应用前景4个方面对该领域的发展进行了概述。     

超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯复合材料的输运性质

采用热压法获得了具有不同混合比例的超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯导电复合材料,并利用x射线衍射、扫描电子显微镜和标准四引线方法对复合材料的结构和低温电输运性质进行测量.实验结果显示,超导氧化物La1.85Sr0.15CuO4颗粒随机分布在聚合物本体中,相互间没有连接构成网络结构.在正常态下,复合材料的电阻-温度变化曲线给出类半导体行为.但对应于超导氧化物La1.85Sr0.15CuO4的超导转变温度Tc处,复合材料的电阻-温度变化曲线出现了极小值.室温下电阻率ρ随外加电场强度E的变化曲线测量结果表明,ρ-E曲线为一线形关系,随着电场强度E增加,电阻率ρ下降.文中对可能存在的导电机制进行分析,结果表明隧道贯穿模型可以很好地解释复合材料的导电机制.另外,外加电场强度E对复合材料的电输运特性有明显的影响.