苯乙烯－马来酸酐共聚物单分子膜的静、动态性质

对不同分子量的苯乙烯－马来酸酐共聚物（PSM）单分子膜的π－A等温线、微 分曲线进行了研究，讨论了PSM单分子膜成膜过程及分子量对膜相变的影响，并用 动态膜障振动法测定了PSM单分子膜的动态弹性，结果表明，分子链的相互作用（ 如卷曲和缠结）在膜的形成中起着重要的作用，并影响膜的静、动态性质，单分子 膜的动态弹性曲线有双峰，且前者比后者小，随分子量增大，膜的凝聚性、刚性和 稳定性都增强，动态弹性都增大；且分子链的相互作用对PSM单分子性质影响增大 ，压缩过程中单分子膜的相变更明显。     

Incorporation conditions guiding the aggregation of a glycosylphosphatidyl inositol (GPI)-anchored protein in Langmuir monolayers

This work investigates the process of incorporation of a glycosylphosphatidyl inositol (GPI)-anchored alkaline phosphatase into Langmuir monolayers of dimyristoyl phosphatidic acid (DMPA). Three different methods of protein incorporation were assayed. When the protein solution was injected below the air–water interface after formation of the lipid monolayer a micro-heterogeneous distribution of alkaline phosphatase throughout the interface was observed. Adsorption kinetics studied by fluorescence microscopy, associated with surface pressure measurements, led to the proposition of a model in which the protein penetration is modulated by the surface packing of the monolayer and intermolecular interactions occurring between the phospholipid and the protein. At initial surface pressures higher than 20 mN m⁻¹, the protein is quickly adsorbed on the interface and the lateral diffusion drives the alkyl chains to turn towards the air phase while the polypeptide moiety faces the aqueous subphase.     

Simultaneous detection of cadmium, copper, and lead using a carbon paste electrode modified with carbamoylphosphonic acid self-assembled monolayer on mesoporous silica (SAMMS)

A new sensor was developed for simultaneous detection of cadmium (Cd²⁺), copper (Cu²⁺), and lead (Pb²⁺), based on the voltammetric response at a carbon paste electrode modified with carbamoylphosphonic acid (acetamide phosphonic acid) self-assembled monolayer (SAM) on mesoporous silica (Ac-Phos SAMMS). The adsorptive stripping voltammetry (AdSV) technique involves preconcentration of the metal ions onto Ac-Phos SAMMS under an open circuit, then electrolysis of the preconcentrated species, followed by a square wave potential sweep towards positive values. Factors affecting the preconcentration process were investigated. The voltammetric responses increased linearly with the preconcentration time from 1 to 30 min or with metal ion concentrations ranging from 10 to 200 ppb. The responses also evolved in the same fashion as adsorption isotherm in the pH range of 2-6. The metal detection limits were 10 ppb after 2 min preconcentration and improved to 0.5 ppb after 20 min preconcentration.     

Template functions of particle monolayers on hydrophobic solid substrates

The template function of cationic particle monolayers bearing quaternary ammonium groups on their surfaces towards anionic colloids was investigated in this paper. Monodispersed cationic polymer particles having quaternary ammonium groups were self-organized on octadecylated glass plates through hydrophobic interaction. The morphology of the resulting particle monolayers was changed by tuning hydrophilic–hydrophobic balance of particles to fabricate aggregated type and dispersed type of particle monolayers. Gold and silver colloids were selectively deposited onto the particle monolayers through electrostatic interaction. The deposited gold and silver colloids on particle monolayers showed plasmon absorbance. Fluorescent silica colloids were also selectively deposited on particle monolayers to permit fluorescence labeling of the particle monolayers. Cationic particle monolayers fabricated on hydrophobic solid octadecylated were found to effectively work as templates for the deposition of above mentioned inorganic colloids.     

A polypyrrole/polymethylene pattern on gold using a micro-contact printing technique

A micro-contact printing technique was used to fabricate a polypyrrole/polymethylene pattern on a gold surface. ω-(N-Pyrroyl)undecanethiol (PyC₁₁SH) acts as ink for the generation of a pyrrole-terminal monolayer patterned on gold. This monolayer-patterned surface functions as a resist for the selective growth of polymethylene by catalytic decomposition of diazomethane on the gold surface. It also functions as a monomer for the electrochemical polymerization of pyrrole on the PyC₁₁SH monolayer-patterned surface. The polypyrrole/polymethylene pattern was fabricated by an electrochemical polymerization method. The polypyrrole was grown on the pyrrole-patterned surface by potential scanning between 0.0 and 1.2 V vs. Ag wire. The thickness of the polypyrrole growth increases with the increasing number of cycles. The structural features of the patterned surface can be determined by scanning electron microscopy and atomic force microscopy. Electronic Publication     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. II. Self-organization of cationic polymer particles on polymer films and wettability control with particle monolayers

Self-organization of cationic polymer particles through hydrophobic interaction on polymer films in aqueous system and characteristic properties of the resulting particle monolayers were investigated. Cationic polymer particles bearing quaternary ammonium groups on their surfaces effectively self-organized on polymer films. With an increase of the particle surface charge density, the surface coverage and average aggregate size (N _a) decreased. The surface coverage control was accomplished by tuning the ionic strength of the media. The wettability of polymer films for water was imparted by the formation of particle monolayers on them. Annealing of the particle monolayers resulted in the increase of the adhesive strength, while the wettability for water was lost. Further improvements of both wettability and adhesive strength of particle monolayers were achieved by the immobilization of silica colloids on the particle monolayers. This method would be effective for the hydrophilization of polymer films.     

On the Structure and Formation of Self-Assembled Lattices of Gold Nanoparticles

The structure and ordering of nanoparticles of gold functionalized with n-alkyl thiol molecules are studied both experimentally and theoretically. Samples where produced using n=6 to n=16 alkyl thiol molecules. High Resolution Electron Microscopy coupled with image processing was used to study the gold particle structure. The details of the particle structure are discussed. We found that when the gold surface is saturated with thiol molecules there is some tendency to produce molecules with a disulphide structure. We also show that ordered arrays of particles can be produced using Langmuir-Blodgett techniques. The crystal structure of the films produced is studied and found to be 3D hcp. We also report that thiol covered gold particles with a size of 5 nm present a rounded shape suggesting that thiol molecules might induce an isotropic surface energy. It is found in the theoretical calculations that a strong bond between gold and sulphur is required to stabilize the complex metal-n-alkyl thiol. It is predicted that otherwise a heavily distorted nanocore will be formed. This is contrary to the observed structure of the particles.     

Electrocatalytic oxidation and detection of hydrazine at gold electrode modified with iron phthalocyanine complex linked to mercaptopyridine self-assembled monolayer

Electrocatalytic oxidation and detection of hydrazine in pH 7.0 conditions were studied by using gold electrode modified with self-assembled monolayer (SAM) films of iron phthalocyanine (FePc) complex axially ligated to a preformed 4-mercaptopyridine SAMs. The anodic oxidation of hydrazine in neutral pH conditions with FePc-linked-mercaptopyridine-SAM-modified gold electrode occurred at low overpotential (0.35 V versus Ag|AgCl) and the treatment of the voltammetric data showed that it was a pure diffusion-controlled reaction with the involvement of one electron in the rate-determining step. The mechanism for the interaction of hydrazine with the FePc-SAM is proposed to involve the Fe^(III)Pc/Fe^(II)Pc redox process. Using cyclic voltammetry (CV) and Osteryoung square wave voltammetry (OSWV), hydrazine was detected over a linear concentration range of 1.3 × 10⁻⁵ to 9.2 × 10⁻⁵ mol/L with low limits of detection (ca. 5 and 11 μM for OSWV and CV, respectively). At concentrations higher than 1.2 × 10⁻⁴ mol/L the anodic peak potential shifted to 0.40 V (versus Ag|AgCl), and this was interpreted to be due to kinetic limitations resulting from the saturation of hydrazine and its oxidation products onto the redox-active monolayer film. This type of metallophthalocyanine-SAM-based electrode is a highly promising electrochemical sensor given its ease of fabrication, good catalytic activity, stability, sensitivity and simplicity.     

Isoconversional Curing and Degradation Kinetics Study of Self-assembled Thermo-responsive Resin System Bearing Oxime and Iminium Groups

This paper demonstrates synthesis of a self-assembled resin system containing p-acetylpyridine oxime, formaldehyde and p-methoxyacetophenone moieties in main chain and thermally cross-linkable periphery oxime groups, and application as antimicrobial coating in biomedical applications. The post-polymerization conversion from oxime into iminium groups was observed by heating scan, with exothermic peaks being at 194 to 247°C. Various degradation models including the Flynn-Wall-Ozawa (F-W-O), Kissinger-Akahira-Sunose (K-A-S), Tang (T) and Friedman (F) methods were employed to check the thermal stability of self-assembly by computing apparent activation energy. It has also exhibited strong biocidal properties against gram-positive and gram-negative bacteria, and fungi until the macrochain retains some positive charge. The obtained results prove that the structure of links, which combine the hydrophobic pyridine rings with the hydrophilic iminium groups, is responsible for the high biocidal activity of the resin system.