Profiling primaquine metabolites in primary human hepatocytes using UHPLC‐QTOF‐MS with 13C stable isotope labeling

Therapeutic efficiency and hemolytic toxicity of primaquine (PQ), the only drug available for radical cure of relapsing vivax malaria are believed to be mediated by its metabolites. However, identification of these metabolites has remained a major challenge apparently due to low quantities and their reactive nature. Drug candidates labeled with stable isotopes afford convenient tools for tracking drug‐derived metabolites in complex matrices by liquid chromatography‐tandem mass spectrometry (LC‐MS‐MS) and filtering for masses with twin peaks attributable to the label. This study was undertaken to identify metabolites of PQ from an in vitro incubation of a 1:1 w/w mixture of ¹³C₆‐PQ/PQ with primary human hepatocytes. Acquity ultra‐performance LC (UHPLC) was integrated with QTOF‐MS to combine the efficiency of separation with high sensitivity, selectivity of detection and accurate mass determination. UHPLC retention time, twin mass peaks with difference of 6 (originating from ¹³C₆‐PQ/PQ), and MS‐MS fragmentation pattern were used for phenotyping. Besides carboxy‐PQ (cPQ), formed by oxidative deamination of PQ to an aldehyde and subsequent oxidation, several other metabolites were identified: including PQ alcohol, predictably generated by oxidative deamination of PQ to an aldehyde and subsequent reduction, its acetate and the alcohol's glucuronide conjugate. Trace amounts of quinone‐imine metabolites of PQ and cPQ were also detected which may be generated by hydroxylation of the PQ/cPQ quinoline ring at the 5‐position and subsequent oxidation. These findings shed additional light on the human hepatic metabolism of PQ, and the method can be applied for identification of reactive PQ metabolites generated in vivo in preclinical and clinical studies. Copyright © 2013 John Wiley & Sons, Ltd.     

Ultra high performance liquid chromatography-quadrupole-time of flight analysis for the identification and the determination of resveratrol and its metabolites in mouse plasma

Resveratrol is a polyphenol that has numerous interesting biological properties, but, per os, it is quickly metabolized. Some of its metabolites are more concentrated than resveratrol, may have greater biological activities, and may act as a kind of store for resveratrol. Thus, to understand the biological impact of resveratrol on a physiological system, it is crucial to simultaneously analyze resveratrol and its metabolites in plasma. This study presents an analytical method based on UHPLC-Q-TOF mass spectrometry for the quantification of resveratrol and of its most common hydrophilic metabolites. The use of ¹³C- and D-labeled standards specific to each molecule led to a linear calibration curve on a larger concentration range than described previously. The use of high resolution mass spectrometry in the full scan mode enabled simultaneous identification and quantification of some hydrophilic metabolites not previously described in mice. In addition, UHPLC separation, allowing run times lower than 10 min, can be used in studies that requiring analysis of many samples.     

Determination of 13C/12C-ratios of anthropogenic organic contaminants in river water samples by GC-irmMS

This study describes the application of a common analytical procedure adapted for compound-specific stable carbon isotope analyses of riverine contaminants. To evaluate the sensitivity of the analytical method and the precision of the isotopic data obtained, a set of numerous substances at different concentration levels were measured. For most of the anthropogenic contaminants investigated (including chlorinated aliphatics and aromatics, musk fragrances, phthalate-based plasticizers and tetrabutyl tin) acceptable carbon isotope analyses could be obtained down to amounts of approximately 5?ng absolutely applied to the gas chromatograph. These amounts correspond to concentrations in water samples at a natural abundance level of approximately 50–200?ng?L^?1 (low to medium contaminated river systems). However, it has to be considered that the precision and the sensitivity of the analytical method depend partially on the chemical properties of the substances measured. Five recovery experiments were conducted to assess changes in carbon isotope ratios during sample preparation and measurement. The compounds selected for these experiments are known riverine contaminants. Isotopic shifts or higher variations of the isotope ratios as a result of the analytical procedures applied were observed only for a couple of contaminants. Furthermore, compound-specific carbon isotope analyses were performed on eight water extracts of the Rhine river. By comparing the variation of the data of several individual compounds with the deviations obtained from the recovery experiments, it was possible to differentiate contaminants with unaffected isotope ratios and substances with significant alterations of the δ¹³C-values.     

Qualitative interpretation of physico-chemical and isotopic parameters in the Krka River (Croatia) assessed by multivariate statistical analysis

Multivariate statistical analyses were applied on the measured physico-chemical (Cd, Pb, Cu, Zn, Mg, Ca, O₂, alkalinity, temperature, pH, SAS, DOC and DIC) and isotopic parameters (δ¹³C and δ¹⁸O) to estimate and distinguish anthropogenic from natural influences to the water system of the Krka River. Analyses were conducted on the data collected during six years from twelve sampling sites. On the basis of orientation, positioning and grouping of parameters arranged by biplots, four main hypotheses were defined and finally statistically confirmed. Thereof, two main and distinct processes occurring in the Krka River could be highlighted: (i) upstream pollution, caused by the inflow of untreated waste-waters of city of Knin and (ii) downstream self-purification, caused by the sedimentation and/or co-precipitation of pollutants coupled by the inflow of clean subterranean water (groundwater recharge). Grouping of (i) hydrological and carbon cycle connected parameters, and (ii) anthropogenically influenced correlated parameters were proposed as a result of statistical analysis. Regarding the pH, it is shown that a stream section influenced by the subterranean inflow of Zrmanja River is statistically significantly different for all sampling campaigns during six years, being lower for about 0.5 pH unit.     

Du Fort-Frankel格式及DFF-I并行格式的稳定性

 本文对抛物型方程的Du Fort-Frankel(DFF)格式以及基于该格式构造的并行差分格式(DFF-I)进行了稳定性分析。采用矩阵分析方法, 证明了其无条件(LR)稳定性, 给出了DFF格式的稳定性系数的最小值的上界估计, 结果表明其与网格比有关, 从而DFF格式并非绝对稳定。本文改进了并行差分格式(DFF-I)的稳定性分析结果, 证明了其增长矩阵的谱半径严格小于1, 从而具有长时间稳定性。数值算例验证了DFF-I格式具有空间二阶精度, 且有很好的稳定性。     

可加稳定过程的自相交局部时

本文研究了可加稳定过程的自相交局部时的问题.利用Borel–Canteil引理等方法,得到可加稳定过程的自相交局部时的Hlder上界,推广了文献[5]中的结果.     

Context-free grammars for triangular arrays

We consider context-free grammars of the form G = {f → fb1+b2+1ga1+a2, g → fb1 ga1+1},where ai and bi are integers sub ject to certain positivity conditions. Such a grammar G gives rise to triangular arrays {T(n, k)}0≤k≤n satisfying a three-term recurrence relation. Many combinatorial sequences can be generated in this way. Let Tn (x) =∑nk=0T(n, k)xk. Based on the differential operator with respect to G, we define a sequence of linear operators Pn such that Tn+1(x) = Pn(Tn(x)). Applying the characterization of real stability preserving linear operators on the multivariate polynomials due to Borcea and Br?ndén, we obtain a necessary and sufficient condition for the operator Pn to be real stability preserving for any n. As a consequence, we are led to a sufficient condition for the real-rootedness of the polynomials defined by certain triangular arrays, obtained by Wang and Yeh.Moreover, as special cases we obtain grammars that lead to identities involving the Whitney numbers and the Bessel numbers.     

Stable aqueous dispersion of magnetic iron oxide core–shell nanoparticles prepared by biocompatible maleate polymers

A new method is applied to prepare stable aqueous dispersion of magnetic iron oxide nanoparticles (MNPs) by biocompatible maleate polymers. Fe₃O₄ magnetic core–shell nanoparticles are obtained via forming an inclusion complex between carboxylic acid groups of maleated biocompatible polymers shell and Fe₃O₄ MNPs core surface. Maleate polymers are synthesized via esterification of poly(ethylene glycol), poly(vinyl alcohol) and starch with maleic anhydride (MA). The Fe₃O₄ magnetic core–shell nanoparticles are characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The obtained magnetic core–shell nanoparticles exhibit superparamagnetic property and reveal long‐term aqueous stability. This work represents a valid methodology to produce highly stable aqueous dispersion of Fe₃O₄ MNPs ferrofluids which can be expected to have great potential as contrast agent for magnetic resonance imaging. Furthermore, the shell composition of biocompatible maleate polymers with double bond of MA as crosslinker agent allows the polymerization with other monomers to design preferred drug delivery systems. Copyright © 2014 John Wiley & Sons, Ltd.     

Selective adsorption and stable solidification of radioactive cesium ions by porous silica gels loaded with insoluble ferrocyanides

Development of highly functional cesium selective adsorbents for the decontamination of high-activity-level water(HALW) from the Fukushima NPP-1 accident is very urgent. In order to selectively adsorb the radioactive cesium, three kinds of novel porous silica gels loaded with insoluble ferrocyanides(SLFC) were prepared using a successive impregnation/precipitation method. Based on the results of previous research, the SLFC composites have relatively large uptake ratio above 95%, distribution coefficients(Kd) above 103 cm3/g, and excellent adsorption kinetics even in seawater. The solidification results also indicate that zeolites have an excellent Cs immobilization characteristic, gas-trapping and self-sintering abilities, and low leachability. We chose three kinds of SLFC composites to achieve the optimization of solidification by mixing with nine kinds of additives at high temperatures(up to 1200 °C). The Cs contents in the three composites were estimated to be below 30% of the initial contents and decreased with the three stages at calcination temperatures ranging from 25 to 1200 °C. By contrast, the Cs immobilization ratio was markedly lowered by mixing with additives: of those, allophane had the best immobilization result. By increasing the additive ratio to 50 wt%, the Cs immobilization ratio became almost 100% and no volatilization of Cs was detected even after calcination at 1200 °C. This result indicates that calcination of the mixture of SLFC composites after adsorbing Cs+ ions and specific additives under appropriate ratio is effective for stable solidification.