Some new results of IR systems'' sensitivity equations

Typical IR systems' sensitivity equations have been established for decades, these include the NETD equation for IR imaging systems, and the acquisition and tracking range equations for IR searching and tracking systems, but they only fit the specific or simplified conditions. For example, the NETD equation can only be used for systems tested under the standard condition. In the field application, we must deal with the noise equivalent radiance difference NELD, not the NETD, and give out its explicit equation for concrete calculation. For the range equation, when the small target, often called a point source, is not strong enouph, i. e., when the target contrast is seriously decreased, we must consider the unneglectable background effect. In this paper, we summarrize some more general and valuable IR systems' sensitivity equations, which can be used for the practical engineering analysis and projection effectively.     

激光陀螺读出信号高速采集系统

介绍了激光陀螺（RLG）读出信号高速采集系统的设计和实现方案。该系统包括板卡和相应的应用软件,提供两路最高60MHz采样频率、14位精度的数据采集通道,能够同时对RLG两路光强拍频信号进行高速高精度数据采集,为RLG特性分析提供重要依据。该系统通过上位机软件控制板卡的工作状态、设置和切换采样模式。板卡利用FPGA接收计算机指令并协调控制模数转换器、SDRAM和USB接口芯片,完成RLG输出拍频信号的采集、缓存和传输。FP—GA设计中结合了硬件逻辑高速灵活的优点和NIOSⅡ软核处理器在控制方面的优势。SDRAM完成海量数据缓存,USB接口芯片工作在SlaveFIFO模式下,实现板卡与计算机的通信。实验证明该系统工作稳定,在RLG测试和性能分析中具有很好的实用性。     

Practical guide for selection of 1H qNMR acquisition and processing parameters confirmed by automated spectra evaluation

In our recent paper, a new technique for automated spectra integration and quality control of the acquired results in qNMR was developed and validated (Monakhova & Diehl, Magn. Res. Chem. 2017, doi: 10.1002/mrc.4591 ). The present study is focused on the influence of acquisition and postacquisition parameters on the developed automated routine in particular, and on the quantitative NMR (qNMR) results in general, which has not been undertaken previously in a systematic and automated manner. Results are presented for a number of model mixtures and authentic pharmaceutical products measured on 500‐ and 600‐MHz NMR spectrometers. The influence of the most important acquisition (spectral width, transmitter [frequency] offset, number of scans, and time domain) and processing (size of real spectrum, deconvolution, Gaussian window multiplication, and line broadening) parameters for qNMR was automatically investigated. Moderate modification of the majority of the investigated parameters from default instrument settings within evaluated ranges does not significantly affect the trueness and precision of the qNMR. Lite Gaussian window multiplication resulted in accuracy improvement of the qNMR output and is recommended for routine measurements. In general, given that the acquisition and processing parameters were selected based on the presented guidelines, automated qNMR analysis can be employed for reproducible high‐precision concentration measurements in practice.     

基于FPGA的高精度硅微谐振加速度计数据采集与参数补偿系统设计与实现

硅微谐振加速度计因具有小体积优势和高精度潜力,成为硅微惯性传感器研制的热点之一。频率信号的高精度采集和系统参数补偿是提高硅微谐振加速度计性能的重要手段之一。在分析硅微谐振加速度计工作机理的基础上,从双路差动频率信号的精确采集和系统误差参数补偿角度出发,分析了数据采集的原理,提出了一种高精度硅微谐振加速度计用数据采集与参数补偿方法。给出了设计思路和电路实现方法,讨论了误差来源与改进方法。所设计的数据采集系统针对中心频率18 k Hz.,标度因数400 Hz/g,量程±20g的加速度计,数据更新周期200 ms下频率分辨率为0.0005 Hz,等效加速度分辨率达到1.25μg。测试表明,补偿后的硅微谐振加速度计,在全温(-40~+70℃)内,K0温度系数从262μg/℃降低到29.9μg/℃,K1变化量从4.18%降低到2.04‰,全量程非线性从7.16‰降低到0.128‰,系统参数满足设计指标。     

A numerical approach to spherical indentation techniques for material property evaluation

In this work, some inaccuracies and limitations of prior indentation theories, which are based on experimental observations and the deformation theory of plasticity, are investigated. Effects of major material properties on the indentation load-deflection curve are examined via finite element (FE) analyses based on incremental plasticity theory. It is confirmed that subindenter deformation and stress-strain distribution from deformation plasticity theory are quite dissimilar to those obtained from incremental plasticity theory. We suggest an optimal data acquisition location, where the strain gradient is the least and the effect of friction is negligible. A new numerical approach to indentation techniques is then proposed by examining the FE solutions at the optimal point. Numerical regressions of obtained data exhibit that the strain-hardening exponent and yield strain are the two key parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides a stress-strain curve and material properties with an average error of less than 3%.     

基于LabWindows/CVI的导弹舵机测控系统设计

舵机是导弹控制系统的重要执行机构,为实现对电动及气动多种型号导弹舵机性能的测试,设计开发了一种基于LabWindows/CVI虚拟仪器的测控系统。介绍了该测控系统硬件组成和软件结构流程,软件设计过程中充分利用多线程、数据库等技术,准确快速完成舵机自动化性能测试。应用结果表明:该舵机测控系统工作稳定,测试精度和自动化程度高,满足舵机试验测试精度和技术指标要求,为舵机的性能研究和维修维护提供了良好的测试环境。     

Anomalies of Glass Transition: Manifestation in fullerene core polystyrene stars

Segmental dynamics around T_g in the 4- and 6-arm fullerene (C₆₀) core star-like polystyrenes with different preset arm lengths was studied by DSC as compared to that in the linear PS and PS/C₆₀ blend. The anomalies in glass transition behavior were found for the stars including both suppression and facilitation of segmental motion, and pronounced dynamic heterogeneity within a transition range. The results are interpreted in terms of breakdown of intermolecular cooperativity of segmental motions and PS-C₆₀ interactions.This revised version was published online in November 2005 with corrections to the Cover Date.     

Data acquisition in the EUDET project

The goal of the EUDET project is the development and construction of infrastructure to permit detector R&D for the international linear collider (ILC) with larger scale prototypes. It encompasses major detector components: the vertex detector, the tracker and the calorimeters. We describe here the status and plans of the project with emphasis on issues related to data acquisition for future test beam experiments.      

活塞式压气机性能测试实验台的研制与应用

基于数据采集与处理技术设计了低成本活塞式压气机性能测试实验台,重点讨论了系统硬件和软件的组成特点,分析了实测的p-α图、p-V图和多变指数.实际应用表明,该实验台可以真实再现压气机的热力过程,既可以用于压气机热力学分析的本科实验,又可以用于压气机运行故障的诊断分析.