碳糊修饰电极吸附伏安法测定食品中的锑

研制了溴邻苯三酚红 (BPR)作修饰剂的碳糊修饰电极 ,并用此电极作工作电极建立了测定痕量锑的吸附伏安法。在选定的实验条件下 ,峰电流与Sb(Ⅲ )浓度在 8.0× 1 0 -9～ 2 .0× 1 0 -7mol L范围内呈线性关系 ,检出限为 2 .0×1 0 -9mol L ,1 0次测定相对标准偏差为 2 .0 % ,不用分离 ,可直接测定食品中痕量Sb(Ⅲ ) ,测定的回收率为 90 %～ 1 0 3%。     

一种新的测定微粒的电化学技术

设计了一种由2个石墨电极短路相连组成工作电极的新的电化学池装置.操作时首先通过外力按压使极少量固体微粒粘附在其中一个石墨电极表面上,然后在溶液存在下将微粒夹紧并固定在2个石墨电极表面之间进行电化学测定.电化学转化过程中生成的可溶性物质被封闭在2个石墨电极表面之间而得到测定.用该技术对钯沉积在氧化铝上而组成的催化剂的电化学行为以及黄铁矿的电化学行为进行了研究.结果表明,其兼具可电解粘合剂碳糊电极和固体微粒伏安法(voltammetry of microparticles)技术的优点而避免了各自的缺点:即不使用粘合剂,从而消除了粘合剂中杂质产生的氧化或还原电流的影响;可测定电化学转化过程中生成的可溶性物质;分辨率好、易于操作.     

Organically nanoporous silica gel based on carbon paste electrode for potentiometric detection of trace Cr(III)

A new ion-selective electrode (ISE) for the detection of trace chromium(III) was designed by using 2-acetylpyridine and nanoporous silica gel (APNSG)-functionalized carbon paste electrode (CPE). The presence of APNSG acted as not only a paste binder, but also a reactive material. With 7.5 wt% APNSG proportions, the developed electrode exhibited wide dynamic range of 1.0 × 10⁻⁸ to 1.0 × 10⁻³ M toward Cr(III) with a detection limit of 8.0 × 10⁻⁹ M and a Nernstian slope of 19.8 ± 0.2 mV decade⁻¹. The as-prepared electrode displayed rapid response (∼55 s), long-time stability, and high sensitivity. Moreover, the potentiometric responses could be carried out with wide pH range of 1.5-5.0. In addition, the content of Cr(III) in food samples, e.g. coffee and tea leaves, has been assayed by the developed electrode, atomic absorption spectrophotometer (AAS) and atomic emission spectrometer (ICP-AES), respectively, and consistent results were obtained. Importantly, the response mechanism of the proposed electrode was investigated by using AC impedance and UV-vis spectroscopy.     

Electrochemical sensors and biosensors based on heterogeneous carbon materials

Abstract  An overview of the use of electrochemical sensors made from heterogeneous carbon materials (carbon paste electrodes, screen-printed carbon electrodes) in the field of food analysis is presented. Sensors for inorganic and organic analytes as well as biosensors are summarized. Graphical abstract        

Electrochemistry and Voltammetric Determination of Adenosine with N‐Hexylpyridinium Hexafluorophosphate Modified Electrode

An ionic liquid N‐hexylpyridinium hexafluorophosphate (HPPF₆) modified carbon paste electrode was fabricated for the sensitive voltammetric determination of adenosine in this paper. Carbon ionic liquid electrode (CILE) was prepared by mixing graphite powder and HPPF₆ together and the CILE was characterized by scanning electron microscopy (SEM) and electrochemical methods. The electrochemical behaviors of adenosine on the CILE were studied carefully. Compared with the traditional carbon paste electrode (CPE), a small negative shift of the oxidation peak potential appeared with greatly increase of the oxidation peak current, which indicated the presence of ionic liquid in the carbon paste not only as the binder but also as the modifier and promoter. Under the optimal conditions the oxidation peak current increased with the adenosine concentration in the range from 1.0×10^?6 mol/L to 1.4×10^?4 mol/L with the detection limit of 9.1×10^?7 mol/L (S/N=3) by differential pulse voltammetry. The proposed method was applied to the human urine samples detection with satisfactory results.     

A Novel Voltammetric Method for the Determination of Maleic Acid Using Silver Amalgam Paste Electrode

An efficient voltammetric method was developed for the determination of maleic acid at a silver amalgam paste electrode (AgA‐PE) in Britton–Robinson buffer pH 2.0. The experimental parameters, such as pH of Britton–Robinson buffer, type of the supporting electrolyte and activation of the electrode surface were optimized. Under the optimal conditions, a linear response was observed over the 2×10^?6–1×10^?4 mol L^?1 maleic acid concentration range, determination limit being 5×10^?7 mol L^?1. A highly stable response, with a relative standard deviation (RSD) of 1.6% for 45 repetitive measurements of 1×10^?4 mol L^?1 maleic acid showed that there was no apparent surface passivation indicating the suitability of the method. The method was successfully applied for direct determination of maleic acid in drinking and river water.     

Coal as a New Carbon Paste Electrode Modifier with Sorption Properties

A new type of carbon paste electrode modified with subbituminous and bituminous coal is presented. The operability of the coal carbon paste electrode with respect to the working potential window attainable was tested in various electrolytes. Cyclic voltammetry of the reference redox system [Fe(CN)₆]^3?/4? was performed to evaluate electron transfer kinetics. Open‐circuit sorption of Cd(II), Pb(II), and Cu(II) with subsequent anodic stripping voltammetry was used to pilot coal sorption ability. The coal modified carbon paste electrode was also examined as a support for mercury film deposition and anodic stripping voltammetry of metals.     

Voltammetric Detection of Lead(II) Using Amide‐Cyclam‐ Functionalized Silica‐Modified Carbon Paste Electrodes

2‐(4,8,11‐Triscarbamoylmethyl‐1,4,8,11‐tetraazacyclotetradec‐1‐yl)acetamide (TETAM) derivatives bearing 1, 2, or 4 silylated arms have been synthesized and grafted to the surface of silica gel and ordered mesoporous silica samples. The resulting organic‐inorganic hybrids have been incorporated into carbon paste electrodes and applied to the preconcentration electroanalysis of Pb(II). The attractive recognition properties of these cyclam derivatives functionalized with amide pendent groups toward Pb(II) species and the highly porous structure of the adsorbents can be exploited for the selective and sensitive detection of the target analyte. Various parameters affecting the preconcentration and detection steps have been discussed with respect to the composition and pH of both accumulation and detection media, the nature of the adsorbent (number of silylated groups linking the macrocycle to silica, texture of materials), the accumulation time, and the presence of interfering cations. Under optimal conditions and for 2 min accumulation at open‐circuit, the voltammetric response increased linearly with the Pb(II) concentration in a range extending from 2×10^?7 to 10^?5 M, while a longer accumulation time of 15 min afforded a linear calibration curve between 10^?8 and 10^?7 M with a detection limit of 2.7×10^?9 M which is well below the European regulatory limit of lead in consumption water.     

Adsorptive Stripping Voltammetric Determination of Nanomolar Concentration of Cerium(III) at a Carbon Paste Electrode Modified by N′‐[(2‐Hydroxyphenyl)Methylidene]‐2‐Furohydrazide

The aim of this work was to obtain an adsorptive stripping voltammetric method for the Ce(III) determination at a carbon paste electrode, chemically modified with N'‐[(2‐hydroxyphenyl)methylidene]‐2‐furohydrazide (NHMF). The electroanalytical procedure comprised two steps: the Ce(III) chemical accumulation at ?200 mV followed by the electrochemical detection of the Ce(III)/NHMF complex, using anodic stripping voltammetry. The factors, influencing the adsorptive stripping performance, were optimized including the modifier quantity in the paste, the electrolyte concentrations, the solution pH and the accumulation potential or time. The resulting electrode demonstrated a linear response over a wide range of Ce(III) concentration (5.0–90 nmol dm^?3). The detection limit was found to be 0.8 nmol dm^?3 on the basis of a signal to noise ratio of 3. The precision for six determinations of 10 and 55 nmol dm^?3 Ce(III) was 5.6% and 2.1% (relative standard deviation), respectively. Application of the procedure to the determination of cerium in phosphate rock and wastewater samples gave good results.     

Voltammetric sensor for glutathione determination based on ferrocene-modified carbon paste electrode

The electrocatalytic oxidation of glutathione (GSH) has been studied at the surface of ferrocene-modified carbon paste electrode (FMCPE). Cyclic voltammetry (CV), double potential step chronoamperometry, and differential pulse voltammetry (DPV) techniques were used to investigate the suitability of incorporation of ferrocene into FMCPE as a mediator for the electrocatalytic oxidation of GSH in buffered aqueous solution. Results showed that pH 7.00 is the most suitable for this purpose. In the optimum condition (pH 7.00), the electrocatalytic ability of about 480 mV can be found and the heterogeneous rate constant of catalytic reaction was calculated as . Also, the diffusion coefficient of glutathione, D, was found to be 3.61 × 10^–5 cm² s⁻¹. The electrocatalytic oxidation peak current of glutathione at the surface of this modified electrode was linearly dependent on the GSH concentration and the linear analytical curves were obtained in the ranges of 3.2 × 10^–5 M–1.6 × 10^–3 M and 2.2 × 10^–6 M–3.5 × 10^–3 M with cyclic voltammetry and differential pulse voltammetry methods, respectively. The detection limits (3σ) were determined as 1.8 × 10^–5 M and 2.1 × 10^–6 M using CV and DPV, respectively. Finally, the electrocatalytic oxidation of GSH at the surface of this modified electrode can be employed as a new method for the voltammetric determination of glutathione in real samples such as human plasma.