Determination of some trace metals with a new synthesized polymer resin by FAAS in various tea and herbal plants samples

In this work, a new polymer resin with a functional groups capable of holding trace metals has been synthesized. The structure of polymer resin has been examined by BET-N₂ method analyzer, IR spectrometer, scanning electron microscope (SEM) and elemental microanalyser. The synthesized polymer resin was used for the simultaneous separation and preconcentration of the trace metals from various tea and herbal plants samples. After extraction process, flame atomic absorption spectrometry (FAAS) was used to determine the trace metals. The analytical parameters and solid phase extraction (SPE) performance such as pH, sample volume, flow rates of sample, flow rates of eluent, concentration, volume and type of eluent and effect of interference ions, were investigated. The limits of detection (DL) of the SPE procedure for trace metals, were calculated to be (3s) in the range of 0.9?4.0 μg L^?1 (n = 21) and the factors of preconcentration (PF) were obtained at 200 for Cd, Co, Cu, Fe, Ni and Zn, and at 50 for Cr, Mn and Pb ions and the relative standard deviation (RSD) at ≤ 2% (n = 11).     

Study on intercalation and exfoliation behavior of organoclays in epoxy resin

Intercalation and exfoliation behavior of organoclays in epoxy resin has been studied through XRD and DSC. It was found that the organoclays were easily intercalated by epoxy oligomer to form a stable epoxy/clay intercalated hybrid. Under appropriate conditions the clays were able to be further exfoliated as the epoxy resin was cured; thus, a nanocomposite was obtained. It was also found that the exfoliating ability of the organoclays was basically determined by the nature of the clays and the curing agent used. The exfoliation mechanism is discussed in this paper. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 115–120, 2001     

Intractable high‐Tg thermoplastics processed with epoxy resin: Interfacial adhesion and mechanical properties of the cured blends

The intractable, high‐temperature‐resistant thermoplastics (TPs) polyphenylenether (PPE) and polyetherimide (PEI) were processed by dissolution into epoxy–amine precursors and a subsequent reaction of the precursors. Because the TP concentration was higher than the critical concentration, the phase separation produced a dispersion of crosslinked thermoset (TS) particles into a TP matrix. The morphology of the blends was examined with transmission electron microscopy and dynamic mechanical thermal spectroscopy, which showed completion of the phase separation. The interfacial adhesion at the TP‐matrix/TS‐particle interface was estimated on TP/TS bilayers to be 10 J/m² in PEI blends, whereas it was 70 J/m² in PPE blends, where there is strong evidence for in situ grafting between PPE phenolic chain ends and glycidyl functions of the reactive TS. Yielding in the compressive mode occurred at an intermediate yield stress between the components' values, and the anelastic deformation was separated from the plastic deformation. Fractures in the tensile mode occurred through debonding at the matrix/particle interfaces and coalescence of these defects, which led to microcrack formation and brittle failure. Mode I fracture toughness was, therefore, higher for PPE blends than for PEI blends, a result of the higher interfacial adhesion. However, a decrease from pure TP was observed. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 363–373, 2001     

The effect of the curing agent content on the curing and liquid‐crystalline phase of liquid‐crystalline epoxy resin

The effect of the curing agent content on the curing behavior and liquid‐crystalline (LC) phase of the liquid‐crystalline epoxy (LCE) resin 4,4′‐di(2,3‐epoxypropyloxy)phenyl benzoate was studied. Diaminodiphenylester (DDE) was used as a curing agent. The curing behavior was observed via differential scanning calorimetry, and the LC phase was investigated with a polarized optical microscopy. The LC phase in the LCE/DDE mixture with a high DDE content was developed during curing. The onset time was inversely proportional to the DDE content. The mesophase stability of LCE/DDE was enhanced by the addition of large amounts of DDE. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 374–379, 2001     

Flame‐retardant epoxy resins: An approach from organic–inorganic hybrid nanocomposites

Phosphorus‐containing epoxy‐based epoxy–silica hybrid materials with a nanostructure were obtained from bis(3‐glycidyloxy)phenylphosphine oxide, diaminodiphenylmethane, and tetraethoxysilane in the presence of the catalyst p‐toluenesulfonic acid via an in situ sol–gel process. The silica formed on a nanometer scale in the epoxy resin was characterized with Fourier transform infrared, NMR, and scanning electron microscopy. The glass‐transition temperatures of the hybrid epoxy resins increased with the silica content. The nanometer‐scale silica showed an enhancement effect of improving the flame‐retardant properties of the epoxy resins. The phosphorus–silica synergistic effect on the limited oxygen index (LOI) enhancement was also observed with a high LOI value of 44.5. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 986–996, 2001     

胺甲基化聚丙烯酰胺阳离子交换剂的合成与表征

采用反相悬浮聚合法合成20%交联度的聚丙烯酰膀(Polyacrylamide,PAM)树脂,经过Mannich反应修饰(nacrylamide:nformaldehyde:ndimethylamine=1:1:1.2)得到高亲水性弱碱性阴离子交换剂氨甲基化聚丙烯酰胺(Aminomcthylated Polyacrylamide,APAM).随着修饰反应时间的增加,得到的APAM的弱碱交换量与蛋白质吸附量增加,在选定的实验条件下,确定Mannich反应时间以1h为宜,所得树脂对牛血清白蛋白吸附量达到433mg/g,过长的反应时间导致树脂结构有一定程度的破坏.树脂对蛋白质的吸附等温线符合Langmuir方程,实际分离牛血清白蛋白和血红蛋白效果较好,柱体积不随洗脱液中盐浓度的增加而变化.     

A novel halogen‐free co‐curing agent with linear multi‐aromatic rigid structure as flame‐retardant modifier in epoxy resin

A novel halogen‐free 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO)‐containing co‐curing agent, 6,6′‐(1,4‐phenylenebis(((4‐(phenylamino)phenyl)amino)methylene))bis(dibenzo[c,e][1,2]oxaphosphinine 6‐oxide) (DPN) was synthesized via a simple 1‐pot or 2‐step procedure with yield of 86.2% and 70.8%, respectively. The molecular structures of 4,4′‐((1,4‐phenylenebis(methanylylidene))bis(azanylylidene))bis(N‐phenylaniline) (DPN intermediate) and DPN are characterized by FTIR, NMR, and MS. TGA tests show that the char yield of DPN/EP composites raises to 30.9% when the molar ratio of DPN to 4,4‐diaminodiphenyl methane(DDM) is 20:80. T_g values of DPN/EP composites tested by DSC and DMA are similar to neat epoxy resin (EP), which is due to the secondary amine in DPN that participates in the cross‐linking reaction of epoxy resin. The storage modulus in the rubber stage (E′‐190 °C) of flame‐retardant epoxy resin is close to that of neat EP, while their tanδ's are lower, which indicates the similarity of samples' cross‐linking density due to the participation of DPN in the cross‐linking reaction. The results show that when the molar ratio of DPN and DDM is 5:95, the epoxy has a higher T_g value and better mechanical properties than other samples. The introduction of DPN efficiently improves the flame‐retardant properties of epoxy resin with V‐0 rating of UL‐94 vertical burning test, non‐dripping, 41% of limit oxygen index (LOI) value, low peak heat release rate (PHRR), and total heat release (THR).     

钯（0）／离子交换树脂对有机锡试剂和有机卤化物偶联反应的催化性能和结构表征

制备了强碱性阴离子交换树脂（）负载钯（０）催化剂，发现它对有机锡试剂和有机卤化物的偶联反应有很高的催化活性，分离容易，可重复使用．起催化作用的是金属态把．ＸＰＳ等实验结果表明，在催化剂中钯作为桥将功能基－Ｎ（ＣＨ３）３与ＯＨ－联结起来．催化剂中的把可以看作是两配位的和配位不饱和的，经过氧化加成、金属交换、还原消除过程完成催化反应．     

无定型聚芳醚酮的氯甲基化改性

采用硫酸作溶剂及催化剂,1,4-二氯甲氧基丁烷（BCMB）为氯甲基化试剂,在均相反应体系中对酚酞聚芳醚酮（PEK-C）进行氯甲基化改性。 采用无致癌性的BCMB作为氯甲基化试剂实现了环境友好,并且成本低,效率高。 试验结果表明,反应机理由苯环亲电取代与亲核取代2种反应构成。 为避免交联反应的发生,反应要在较低温度下进行（10~30 ℃）。 在此温度范围内可制得氯甲基化程度达3.4且完全线型的氯甲基化酚酞聚芳醚酮。 通过反应温度及时间可对树脂氯甲基化程度（χCH2Cl-）实施有效的调控。 CMPEK-C的结构由IR和1H NMR进行了表征,测定了CMPEK-C的Tg与χCH2Cl-之间的依赖关系及CMPEK-C的耐热及溶解性能。     

Preparative purification of five bioactive components from Agrimonia pilosa Ledeb by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) coupled with ultraviolet (UV) detection or evaporative light-scattering detection was successfully applied for preparative separation of five bioactive compounds from Agrimonia pilosa Ledeb. In preliminary process, D101 macroporous resin was used to separate the crude extract of the plant and four fractions (20, 40, 50, and 60% aqueous ethanol elutions) were produced. Then, these fractions were directly subjected to HSCCC purification. Five chemicals including taxifolin-3-glucoside (6.4 mg), quercetin-3-rhamnoside (13.0 mg), tiliroside (14.7 mg), agrimonolide (21.4 mg), and tormentic acid (29.8 mg) with the purities of 94.24, 95.37, 97.42, 95.29, and 96.34% were separated from each 200 mg prepared fraction. The purities were analyzed by high-performance liquid chromatography, and the chemical structures of the products were identified by UV detection, mass spectrometry, nuclear magnetic resonance, and the standards. This paper used a simple method to separate five bioactive compounds from A. pilosa Ledeb, and it could provide a new idea for the purification of bioactive compounds from other medicinal plants.