对氯偶氮氯膦光度法连续测定矿石中稀土总量与钪

在一定的条件下,对氯偶氮氯膦(CPA_pC)与等量的15种单一稀土所形成的络合物具有彼此相似的吸光度值。且该试剂也是钪的灵敏显色剂。据此分析特性,连续测定了矿石中稀土总量与钪,分析结果与标准数据基本相符。     

Highly Diastereo‐ and Enantioselective Michael Addition of Nitroalkanes to 2‐Enoyl‐Pyridine N‐Oxides Catalyzed by Scandium(III)/Copper(II) Complexes

A C₂‐symmetric Schiff‐base ligand, derived from tridentate‐Schiff‐base, was developed and successfully applied to the asymmetric Michael addition of nitroalkanes to 2‐enoyl‐pyridine N‐oxides. With this newly catalytic system, an unprecedented diastereoselectivity was obtained in the asymmetric Michael addition of nitroalkanes to 2‐enoyl‐pyridine N‐oxides. In addition, a switch in enantioselectivity was achieved by using this newly catalytic system and our previous catalyst. After a facile reduction, the optically active adduct was converted to a biologically active dihydro‐2H‐pyrrol 4 a . Furthermore, a connection of two tridentate‐Schiff‐base subunits proved to be an effective strategy in ligand design.     

聚苯氧基磷酸联苯二酚酯/聚磷酸铵膨胀阻燃剂对环氧树脂阻燃性能影响研究

以聚苯氧基磷酸联苯二酚酯(PBPP)与聚磷酸铵(APP)组成复合阻燃剂,对环氧树脂(EP)进行阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法研究改性环氧树脂的阻燃性能和阻燃机理.结果表明,PBPP/APP体系对EP具有较好的阻燃性能,阻燃剂添加量为10%时能使环氧树脂的氧指数提高到29.6%,垂直燃烧等级达到UL94 V-0级,残炭量大大增加;平均热释放速率下降45.7%,热释放速率峰值下降51.0%,有效燃烧热平均值下降21.1%;TGA、CONE、SEM等综合分析显示了PBPP/APP改性后的环氧树脂比纯环氧树脂具有更高的热稳定性,燃烧后能够形成连续、致密、封闭、坚硬的焦化炭层,在聚合物表面产生有效覆盖、隔绝了氧气,改善了环氧树脂的燃烧性能.     

Delamination of sodium montmorillonite in PA6 in the presence of melamine polyphosphate

This study describes the influence of melamine polyphosphate (MPP) flame retardant addition on layered structure of virgin sodium montmorillonite (MMT) in PA6/MMT system obtained in extrusion process. It was found that the extrusion of the PA6/MMT binary system in co‐rotating twin screw extruder gives intercalated clay nanocomposites, while during extrusion of ternary PA6/MMT/MPP composite, full exfoliation of clay was obtained in the system. Structure of the composites was proved utilizing wide angle X‐ray scattering and transmission electron microscopy techniques. Exfoliation of MMT in ternary PA6/MMT/MPP system was also confirmed by rheological studies (viscosity and creep measurements) which were carried out using rotational rheometer. Young's modulus of PA6/MMT/MPP was found to be ~25% greater comparing to PA6/MPP of the same filling level. Cone calorimetry experiments proved decrease of heat release rate peak of PA6/MMT/MPP by ~55% comparing to PA6/MPP with the same total filling level. Copyright © 2017 John Wiley & Sons, Ltd.     

The influence of KH-550 on properties of ammonium polyphosphate and polypropylene flame retardant composites

Ammonium polyphosphate (APP)/polypropylene (PP) composites were prepared by melt blending and extrusion in a twin-screw extruder. APP was first modified by a silane coupling agent KH-550 then added to polypropylene. The surface modification of APP by the coupling agent decreased its water solubility and its interface compatibility with the PP matrix. Limiting oxygen index (LOI) and thermogravimetric analysis (TGA) were used to characterize the flame retardant property and the thermal stability of the composites. The addition of APP improved the flame retardancy of PP remarkably. The crystal structures of APP/PP composites were characterized by X-ray diffraction (XRD). The results indicated that β-crystal phase PP may be formed. The structures and morphologies of APP, KH-550/APP and APP/PP composites were characterized by field-emission scanning electron microscope (FESEM). The mechanical property tests showed good mechanical properties of composite materials. Compared with unmodified one, the impact strength, tensile strength and elongation of modified APP/PP were all improved.     

Asymmetric iodoamination of chalcones and 4-aryl-4-oxobutenoates catalyzed by a complex based on scandium(III) and a N,N'-dioxide ligand

Highly diastereo‐ and enantioselective iodoamination of chalcones, 4‐aryl‐4‐oxobutenoates, and a trifluoro‐substituted enone has been accomplished in the presence of a chiral N,N′‐dioxide/[Sc(OTf)₃] complex (0.5–2 mol %), delivering the desired vicinal anti‐α‐iodo‐β‐amino carbonyl compounds regioselectively in high yields (up to 97 %) and with excellent diastereoselectivities (>99:1 d.r.) and enantioselectivities (up to 99 % ee). Enantiopure syn‐α‐iodo‐β‐amino products could also be obtained from the isomerization of particular iodo compounds. TsNHX species (X=Cl, Br, I), generated from the reactions between the halo sources and TsNH₂, were further confirmed as the active species in the haloamination reactions involved in the formation of the key halonium ion intermediates. A typical haloamination dependency was observed, with reactivity decreasing in the order NBS>NIS?NCS.     

基于光谱学分析的聚氨酯弹性体/聚磷酸铵/氢氧化铝复合材料阻燃机理研究

采用熔融共混技术,将聚磷酸铵(APP)和氢氧化铝(ATH)引入到聚氨酯弹性体(TPU)中,制备了一系列热塑性聚氨酯/聚磷酸铵/氢氧化铝(TPU/APP/ATH)复合材料。采用傅里叶红外光谱(FTIR)、X-射线光电子能谱(XPS)、扫描电镜(SEM)、激光拉曼光谱研究了TPU和阻燃TPU(FR-TPU)复合材料燃烧后炭渣的微观形貌、表面结构、元素组成、键合状态和石墨化程度,结合阻燃性能测试,揭示APP和ATH的协同阻燃机制。SEM分析表明相较于APP与ATH单独使用,TPU/APP/ATH炭层的空洞结构更少,炭渣的致密性更高。XPS分析表明FR-TPU的炭渣中C元素含量相比于纯TPU有所降低,O元素的含量有所上升,其中TPU/APP10/ATH10的C元素含量从88.2%降至69.24%,O元素的含量从8.07%升至17.78%,P和Al元素含量相较于单独添加分别从11.74%和16.36%下降至3.91%和3.31%。在此基础上,通过对C元素的分峰拟合发现TPU炭渣中C—C/C—H,C—O/C—N和CO/CN含量分别为61.05%,35.65%和3.30%;TPU/APP10/ATH10炭渣中三种结构含量分别为45.38%,45.00%和9.63%,说明ATH和APP复配使用有利于C元素形成酯、醚、羰基、羧酸（盐）、酯基等结构。通过对O元素的分峰拟合发现,TPU炭渣中O₂/H₂O,—O—,O三种结构含量分别为28.75%,44.36%和26.89%;TPU/APP10/ATH10炭渣中O₂/H₂O,—O—,O三种结构含量分别为44.33%,32.78%和22.89%,说明APP和ATH的加入有利于炭渣中O元素形成O₂/H₂O结构。通过对N元素的分峰拟合发现,TPU炭渣中—NH—,N结构的N元素含量分别为40.93%和59.07%;TPU/APP10/ATH10中—NH—,N结构的N元素含量分别47.17%和52.83%,说明ATH与APP复配使用促进了—NH—结构的形成。拉曼测试表明,相比于单独使用,APP和ATH复配使用,炭层的石墨化程度更好,致密性更高。以上分析结合阻燃测试可以得出TPU/APP/ATH复合材料阻燃机制：ATH受热分解生成氧化铝,吸收热量并释放大量水蒸气,有效促进APP降解,生成不燃性的氨气和聚磷酸,氨气和水蒸气稀释可燃性气体的浓度。随着温度继续升高,氧化铝可继续与聚磷酸反应生成偏磷酸铝[Al(PO₃)₃],同步催化聚氨酯基体成炭,形成高度石墨化炭层,石墨化炭层与偏磷酸铝一起覆盖在基体表面,有效抑制燃烧区域物质以及能量的输运,从而达到阻燃目的。     

The β‐Agostic Structure in (C5Me5)2Sc(CH2CH3): Solid‐State NMR Studies of (C5Me5)2Sc−R (R=Me,Ph, Et)

Multinuclear solid‐state NMR studies of Cp*₂Sc?R (Cp*=pentamethylcyclopentadienyl; R=Me, Ph, Et) and DFT calculations show that the Sc?Et complex contains a β‐CH agostic interaction. The static central transition ⁴⁵Sc NMR spectra show that the quadrupolar coupling constants (C_q) follow the trend of Ph≈Me>Et, indicating that the Sc?R bond is different in Cp*₂Sc?Et compared to the methyl and phenyl complexes. Analysis of the chemical shift tensor (CST) shows that the deshielding experienced by Cβ in Sc?CH₂CH₃ is related to coupling between the filled σ_C‐C orbital and the vacant orbital.