An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。     

Electrochemical synthesis, characterization and some properties of a polymer derived from thioflavin S

Polymeric films derived from thioflavin S were electrosynthesized on mild steel and silver electrodes in sulfuric acid and lithium perchlorate-containing aqueous solutions. The introduction of thioflavin S in an acidic solution protected the surface of steel from corrosion. The electrochemical behavior of the steel coated with a layer of poly(thioflavin) was examined by electrochemical impedance spectroscopy. The films exhibited a capacitive behavior and were semi-conductive in nature. Infra red reflectance measurements of the polymer films at the steel surface showed that the polymer structure retained the aromatic structure of the benzene and thiazole rings with the distinction of a nitrogen quinone vibrational band. Surface morphology of the polymer film was examined with scanning electron microscopy. The films are yellow, compact and dense when electrochemically formed onto steel surfaces when compared to a blue rather porous when formed onto silver electrode. The mechanism of electropolymerization of thioflavin is given and found similar to that of aniline with the possibility of metal chelation with the sulfur and/or nitrogen in the thiazole ring.     

Importance of the choice of assumptions and models in the estimation of analytical quality specifications

The validity of any model depends on its ability to imagine the situation or problem to which it is applied. Further, the assumptions made in relation to the model are determining for the actual outcome. Within the field of clinical biochemistry a lot of models for analytical quality specifications, based on a variety of concepts and ’clinical settings’, have been proposed. A hierarchical structure for application of these approaches and models has been agreed on at several occasions in 1999. In this hierarchy, the highest rank is given to evaluation of analytical quality specifications based on ’clinical settings’/’clinical outcome’ models, followed by specifications based on biological variation and on ’clinicians opinions’. This contribution, deals with the problems of combining random and systematic errors and the implications of application of different models to a variety of clinical settings. Received: 1 June, 2002 Accepted: 17 July 2002 Presented at the European Conference on Quality in the Spotlight in Medical Laboratories, 7–9 October 2001, Antwerp, Belgium     

Microcalorimetric studies on the non-competitive inhibition of bovine liver arginase

Two methods, e.g. initial rate method and thermokinetic reduced extent method were presented for studies on non-competitive inhibition. Arginase-catalyzed the hydrolysis of L-arginine toL-ornithine and urea and the inhibition of this reaction by sodium fluoride were studied in the absence and presence of exogenous of Mn²⁺at 37°C in 40 mM sodium barbiturate-hydrochloric acid buffer solution (pH 7.4). Both methods were successively used to determine the values of K₁. The advances and disadvantages of each method were compared in this paper. Exogenous Mn²⁺ could result in more sensitivity of arginase to F^-1. Since the inhibition of arginase by F^-1 depends on the pH values of the reaction system and behave as a non-competitive inhibition, it probably due to its small volume and high electronic density allow it access to the activity site of the enzyme and replaces of μ-OH₂ (or μ-OH) as the bridge ligand with Mn(II, II) cluster. However, further studies are necessary to determine the modes of interaction of F^-1 with bovine liver arginase. This revised version was published online in August 2006 with corrections to the Cover Date.     

Valorization of Zea mays hairs waste extracts for antioxidant and anticorrosive activity of mild steel in 1 M HCl environment

The extraction of Zea mays hairs (Z. mays) was carried out by soxhlet and ultrasound techniques and through three solvents. Phytochemical tests and quantitative analysis of total phenols content (TPC) and flavonoids content (FC) for all extracts were also determined. The antioxidant activity, for different fractions, was determined by using three methods; DPPH, FRAP and TAC. All extracts were rich in polyphenols and the analysis of TPC and FC showed that the hydro-ethanolic extract obtained by ultrasound was characterized by a significant amount of TPC and FC. The n-butanolic fraction was rich in FC and also had a very high antioxidant capacity. On the other hand, the inhibiting effect of hydro-ethanolic extract, n-butanolic fraction and standard (flavone) on mild steel corrosion in 1 M HCl solution was investigated by electrochemical measurements. The polarization curves along with EIS diagrams indicated that flavone was the major molecule responsible for inhibition and acted as mixed-type inhibitor with predominant control of cathodic reaction. The antioxidant activity of BF was well correlated to corrosion inhibition efficiency.     

Reaction kinetics of the selective liquid phase hydrogenation of styrene oxide to β-phenethyl alcohol

Liquid phase hydrogenation of styrene oxide using 1% Pd/C and NaOH as a promoter was found to give selectively β-phenethyl alcohol (PEA) under very mild conditions (313–333 K; 0.68–5.5 MPa). The kinetics of this system was investigated by collecting initial rate data in a batch slurry reactor. Rate of hydrogenation was found to decrease beyond a certain concentration of both hydrogen (>3 MPa) and styrene oxide (>0.5 kmol/m³). A Langmuir–Hinshelwood type rate equation has been proposed based on the initial rate data in the kinetic regime. The model predictions agree very well with the experimentally observed concentration–time data indicating the applicability of the proposed rate model.     

Chapter 11 Simulation studies of efficiency,returns to scale and misspecification with nonlinear functions in DEA

Using statistically designed experiments, 12,500 observations are generated from a 4-pieced Cobb-Douglas function exhibiting increasing and decreasing returns to scale in its different pieces. Performances of DEA and frontier regressions represented by COLS (Corrected Ordinary Least Squares) are compared at sample sizes ofn=50, 100, 150 and 200. Statistical consistency is exhibited, with performances improving as sample sizes increase. Both DEA and COLS generally give good results at all sample sizes. In evaluating efficiency, DEA generally shows superior performance, with BCC models being best (except at corner points), followed by the CCR model and then by COLS, with log-linear regressions performing better than their translog counterparts at almost all sample sizes. Because of the need to consider locally varying behavior, only the CCR and translog models are used for returns to scale, with CCR being the better performer. An additional set of 7,500 observations were generated under conditions that made it possible to compare efficiency evaluations in the presence of collinearity and with model misspecification in the form of added and omitted variables. Results were similar to the larger experiment: the BCC model is the best performer. However, COLS exhibited surprisingly good performances — which suggests that COLS may have previously unidentified robustness properties — while the CCR model is the poorest performer when one of the variables used to generate the observations is omitted.     

Chapter 15 DEA/AR analysis of the 1988–1989 performance of the Nanjing textiles corporation

This article employs new data envelopment analysis/assurance region (DEA/AR) methods to evaluate the efficiency of the 35 textile factories of the Nanjing Textiles Corporation (NTC), Nanjing, China. The returns to scale (RTS) of these factories were studied without assuming that the optimal DEA solutions were unique. All DMUs are identified with pointsE (Extreme Efficient),E (Efficient but not an extreme point) andF (Frontier but not efficient). We then further identify the nonfrontier DMUs with pointsNE, NE andNF according to whether they are projected onto a point inE, E, orF en route to evaluating their performances. All of the inefficient factories were in classNF and had unique optimal primal-dual solution pairs. Consequently, the solution pairs satisfy the strong complementary slackness condition (SCSC). Application of cone-ratio (CR) ARs reduced significantly the number of factories in classE, and showed that some AR-efficient factories were more flexible in adopting the mixture of central planning and market economies that China currently is trying to use. Also, linked-cone (LC) ARs were applied to measure maximum and minimum profit ratios. The SCSC multiplier space approach was utilized to analyze the sensitivity of the efficiency results to potential errors in the data with and without ARs. The results in this article suggest that collective units had a better performance than state-owned units in the two consecutive years analyzed.This paper was written while the author was at the School of Economics and Management, Southeast University, Nanjing 210018, P.R. China.