岩石的核磁共振自旋密度微成像

岩，心是油气储层的基本单元，其内部结构和渗流性质反映了油藏的基本特征．岩。心的精细描述是油藏描述、储层动态监测及设计强化采油方案的重要基础．本文利用核磁共振（NMR）自旋密度做成像，快速无损地观测到两类基本储油岩石——砂岩和灰岩的内部结构，提供了岩石渗透性、孔隙性及灰岩沉积环境等重要信息．1实验方法以自旋回波单片NMR成像脉冲序列为基础，设。P平面内样品的目施密度为P（。，v）．演化期t。，在。方向梯度场G。作用下，各处横向磁化矢量获得的相移为式中，7为共振核（在成像中一般为质子）的旋磁比，g为坐标位置·…     

Application of capillary electrophoresis with different sample stacking strategies for the determination of a group of nonsteroidal anti-inflammatory drugs in the low microg x L(-1) concentration range

Several on-column sample preconcentration modes--large-volume sample stacking using the EOF pump (LVSEP), LVSEP with anion-selective exhaustive injection (LVSEP-ASEI) and field-amplified sample injection with sample matrix removal using the electroosmotic flow (EOF) pump (FAEP)--were used to analyze some nonsteroidal anti-inflammatory drugs (NSAIDs) by capillary electrophoresis, and then compared. Methanol was the background electrolyte solvent to suppress the EOF. The effect of the type and length of the solvent plug, and the sample injection time were investigated in FAEP to determine the conditions that provided the best response. LVSEP, LVSEP-ASEI, and FAEP improved the sensitivity of the peak area by 100-, 1200-, and 1800-fold, respectively. The methodology developed, in combination with solid-phase extraction (SPE), was applied to the analysis of water samples.     

Determination of estrogenic steroids in surface water and wastewater by liquid chromatography-electrospray tandem mass spectrometry

An analytical method is presented which permits trace level determination of 17alpha-ethynylestradiol (EE2), 17beta-estradiol (E2), and estrone (E1). Using this method, the estrogenic steroids were analyzed in drinking water, surface water, and wastewater (sewage influents and effluents) at concentrations down to 0.1 ng/L. Sample volumes between 100 and 500 mL are concentrated using automated solid-phase extraction. Analysis is performed by liquid chromatography with detection by tandem mass spectrometry. Applying simple clean-up procedures and internal standard calibration, recovery losses resulting from matrix-dependent ion suppression during electrospray ionization could be compensated for all of the investigated compounds. Recoveries around 100% were obtained for all analytes after correction using the internal standards. Limits of quantification (LOQ) were between 0.1 and 0.4 ng/L for purified sewage, surface, ground, and drinking water and between 1 and 2 ng/L in the case of raw sewage. Water treatment by wastewater treatment plants (WWTPs) or by a surface water treatment plant affected the removal of all estrogenic steroids. Thus, E1, E2, and EE2 were removed in the municipal WWTPs to the extent of 93%, 93%, and 80%, respectively. In the effluents of the WWTP in Ruhleben (Berlin, Germany), E1, E2, and EE2 were detected at the low ng/L level. E2 and EE2 were, however, not present in the Berlin surface water above the LOQ (0.2 ng/L). E1 was the only compound that could be detected in surface water samples. After additional surface water treatment it was still detectable but only at trace-level concentrations with a mean value of 0.16 ng/L.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

我国区域绿色技术创新效率的分类测度和提升模式研究——基于非期望产出的SBM-SupSBM模型

本文首先运用考虑非期望产出的SBM-SupSBM模型估计我国各省市绿色技术创新效率并进行分类:稳定上升类、平稳类、大幅度波动类以及下降类。之后从企业内部和外部两方面对绿色技术创新效率提升的影响因素提出假设,着重考虑大幅度波动类别省份的效率提升。运用面板数据模型各影响因素进行验证,结论显示:企业规模对绿色技术创新效率波动较大的省份起到显著的抑制作用,环境规制和技术进步对绿色技术创新效率波动较大的省份作用不明显。针对分析结果,提出结论:在提升绿色技术创新效率的过程中,应注重企业规模和技术进步的协同作用,以及技术的开放程度。     

Single machine group scheduling with ordered criteria

The single machine group scheduling problem is considered. Jobs are classified into several groups on the basis of group technology, i.e. jobs of the same group have to be processed jointly. A machine set-up time independent of the group sequence is needed between each two consecutive groups. A schedule specifies the sequence of groups and the sequence of jobs in each group. The quality of a schedule is measured by the criteriaF ₁, ...,F _m ordered by their relative importance. The objective is to minimize the least important criterionF _m subject to the schedule being optimal with respect to the more important criterionF _m–1 which is minimized on the set of schedules minimizing criterionF _m–2 and so on. The most important criterion isF ₁, which is minimized on the set of all feasible schedules. An approach to solve this multicriterion problem in polynomial time is presented if functionsF ₁, ...,F _m have special properties. The total weighted completion time and the total weighted exponential time are the examples of functionsF ₁, ...,F _m–1 and the maximum cost is an example of functionF _m for which our approach can be applied.The research of the authors was partially supported by a KBN Grant No. 3 P 406 003 05, the Fundamental Research Fund of Belarus, Project N 60-242, and the Deutsche Forschungsgemeinschaft, Project Schema, respectively. The paper was completed while the first author was visiting the University of Melbourne.     

Rate conservation laws: A survey

We survey the rate conservation law, RCL for short, arising in queues and related stochastic models. RCL was recognized as one of the fundamental principles to get relationships between time and embedded averages such as the extended Little's formulaH=G, but we show that it has other applications. For example, RCL is one of the important techniques for deriving equilibrium equations for stochastic processes. It is shown that the various techniques, including Mecke's formula for a stationary random measure, can be formulated as RCL. For this purpose, we start with a new definition of the rate with respect to a random measure, and generalize RCL by using it. We further introduce the notion of quasi-expectation, which is a certain extension of the ordinary expectation, and derive RCL applicable to the sample average results. It means that the sample average formulas such asH=G can be obtained as the stationary RCL in the quasi-expectation framework. We also survey several extensions of RCL and discuss examples. Throughout the paper, we would like to emphasize how results can be easily obtained by using a simple principle, RCL.     

示波极谱法测定地质样品中痕量氟

提出了地质样品经半熔法分解后,8-羟基喹啉沉淀干扰组分,过量的8-羟基喹啉用四氯化碳萃取分离,在六次甲基四胺缓冲液中测定Ce(Ⅲ)-ALC-F~-络合吸附波。并对标准物质中F~-进行测定,其测定值与推荐值吻合。方法的RSD为5.6％,检出限为0.6μg·g~(-1)。     

Rapid dissolution procedure for base-metals-bearing complex materials for quality control assessment

A less labour-intensive method, involving a mixture of 1.0 g MnO₂ + 20 mL HCl (11), is proposed for decomposing seven ores and six metallurgical products for accurate and precise estimation of copper, lead, zinc, cobalt and nickel for quality control assessment. Twentyone international reference materials were also analysed. Results of regression analyses are presented and intermethod comparison studies reveal that the probability of results being different compared with a reference method was less than 1%. Sample decomposition is straightforward and the method has been found to be very simple, rapid and easily adaptable, as it involves no separation of the analyte from the matrix elements.     

Glass capillary gas chromatography of amino acid enantiomers

Glass capillaries coated with Chirasil-Val, a chirally functionalised polysiloxane, are capable in principle of resolving all protein amino-acid enantiomers in a single run and within a short analysis time, thus allowing for example the quantitative amino acid determination by enantiomer labelling. The elution characteristics of the individual amino acids however are also dependent upon the chemical nature of the capillary wall surface, and a surface pretreatment is found to be necessary if all protein amino acids are to be analysed. Of the various methods of pretreatment tested, etching of borosilicate glass with gaseous HCl followed by deposition of colloidal silicic acid is considered to be the most suitable.