Microwave-assisted digestion with a single reaction chamber for mineral fertilizer analysis by inductively coupled plasma optical emission spectrometry

A systematic approach is proposed to evaluate microwave-assisted digestion in a single reaction chamber for the simultaneous determination of elements in the mineral fertilizer and raw material by inductively coupled plasma optical emission spectrometry. A reference material was digested using 12 acid mixtures containing nitric, hydrochloric, orthophosphoric, hydrofluoric or boric acid. Principal components analysis was applied for data treatment. Three digestion procedures based on diluted acids exhibited the most accurate results, with relative errors for reference values ranging from ?15% to +?9%. Limits of quantification were in the range of 0.2?mg cadmium kg^?1 up to 1000?mg aluminum kg^?1.     

电感耦合等离子体发射光谱法测定记号笔笔芯和墨水中铜和铬

报道了使用ICP-AES测定记号笔芯和墨水中的铜和铬的方法。 主要关注了不同的样品前处理方法的研究。 结果表明: 对标记用的油性记号笔笔芯和含有高分子树脂的墨水, 采用550 ℃灰化, 混合酸(V_HNO3∶V_HClO4=3∶1)溶解的方法处理样品, 是该类样品比较好的处理方法; 而对不含有高分子树脂的墨水, 采用直接用混合酸(V_HNO3∶V_HClO4=3∶1)的消解即可。 消解后的样品经稀酸酸化后, 采用ICP-AES测定铜和铬, 结果准确、稳定。该方法适合记号笔或墨水中元素的测定。     

火焰原子吸收光谱法测定砂金中金,银

本文研究了用王水溶解砂金样品，在１％王水介质中，使银生成氯化银沉淀与金定量分离。滤液控制１％王水介质用以测定金。沉淀用５％热硫有脲溶解，控制为１％硫脲介质用以测定银。利用本方法测定了砂金样品中金和银得到了满意结果。金的回收率为９９．６％－１００．８％，银的回收率为９７．２－９９．２％。     

TE011腔使用扁平样品管提高水溶液样品ESR波谱灵敏度的研究

实验表明,在TE₀₁₁模式园柱形腔中,不但可以使用扁平样品管测量水溶液样品的ESR波谱,而且获得好的腔品质因子Q和高品质的ESR信号。所观察到的信号高度,是使用最佳尺寸毛细管样品时最大信号高度的3.2倍;又是在具有波导尺寸的TE₁₀₂腔中使用扁平样品管时所获得信号高度的3倍。本文对此作了定性的理论分析。     

基于贝叶斯序贯方法的微波效应实验设计

提出了一种基于贝叶斯验后概率的序贯检验方法,建立了检验的判别准则,给出了判别准则临界值的计算方法。在给定截尾实验次数的条件下,提出了一种截尾方案,建立了截尾判断方法。将其用于解决验证效应物在微波作用下失效概率达到给定水平的微波效应实验设计问题,给出了相应的实验方案和所需样本量的估计。最后,通过实例对上述方法的应用过程进行了说明,并和现有方法进行了分析比较。     

15N/14N Analysis of Amino Acids with GC-C-IRMS - Methodical Investigations and Ecotoxicological Applications

Abstract

In order to perform the ¹⁵N/¹⁴N analysis of amino acids using a gas chromatograph and isotope ratio mass spectrometer linked up via a combustion interface (GC-C-IRMS), the amino acids must be derivatized. Tert-butyldimethylsilylation is examined using various techniques (direct conversion to nitrogen gas, ConFlo-IRMS [1], GC-C-IRMS [2]) and subsequently applied to isotopic characterization of amino acids from wheat protein hydrolyzate obtained from plants exposed to ozone. The method provides a reliable tool for studying ecotoxicological effects on plants at a molecular level in addition to the investigation of the natural variations of different N fractions.     

Magnetic properties of carbon nanosheets

Two-dimensional carbon nanosheets have been fabricated using inductively coupled radio frequency plasma-enhanced chemical vapour deposition. The structural properties of the nanosheets have been characterised using atomic force microscopy, scanning electron microscopy and X-ray diffractometer. The magnetisation of the samples was studied using vibrating sample magnetometer. The magnetisation of the nanosheets was found to be diamagnetic for fast synthesis processes (30 and 60 min). On the other hand, the nanosheets exhibited a weak ferromagnetic response for the slow (120 min) synthesis process. Energy dispersive spectrometry and atomic absorption spectroscopy confirmed that the magnetisation exhibited by the carbon nanosheets was an intrinsic property and that it was not due to contamination from the substrate. Raman spectroscopy studies revealed that the ferromagnetic carbon nanosheets have a higher ratio (1.20) of graphite peak (I _G) to disordered peak (I _D) than normally expected (0.75–0.90). Available data indicated that the magnetisation was due to the presence of structural disorders.     

Study on the denoising method for the electromagnetic ultrasonic echoes from multiple interfaces

The electromagnetic ultrasound is used in the detection of interfaces of the adhesive multilayer structures to solve the unstable coupling problem in ultrasonic testing by traditional piezoelectric transducers. Based on the analysis of the transforming mechanism of electromag-netic ultrasound energy and the resultant dead zone from mutual inductance of the transducer, the wavelet filtering by soft-thresholding and adaptive noise canceling methods are used simul-taneously to the detected electromagnetic ultrasonic signals to overcome the drawbacks of the low signal to noise ratio （SNR） and the wide intrinsic dead zone of the transducer. Processed results in the interface detection of a three layered adhesive sample of steel and rubber materials demonstrate that the wavelet filtering enhances the SNR about 12dB while the adaptive noise canceling narrows the dead zone effectively.     

高温超导电缆导体层电流分布研究

通过建立高温超导电缆等效电路模型,并提出电流分布等效数学方程,求得高温超导电缆导体层电流分布。绕制一根0.2m长110kV/2kA高温超导电缆样缆,并进行载流能力实验,得到各层电流分布结果。分析发现,各层电流分布的实验结果与理论计算结果吻合,从而验证电流分布计算模型的正确性,以及调整绕制角度对均匀层间分流的有效性。研究结论对以后更长高温超导电缆的载流能力分析具有一定的指导意义。     

一种边缘提取的图像分割方法

图像分析技术从广义上来讲 ,是指从图像中提取有用的数据或其它信息。图像分割是图像分析技术的重要手段 ,在前人的理论基础上经过实验提出了一种边缘提取的图像分割方法———行扫描空间带通滤波法。该方法在电视图像的自动跟踪识别中取得了很好的效果 ,是一种较为可取的图像分割方法