用于食品安全分析样品前处理的共价有机聚合物的制备及应用进展

食品安全关系身体健康和生命安全,是全球关注的热点之一。食品基质复杂,痕量有毒有害物质分析之前必须经过有效的前处理。目前发展的前处理技术如固相萃取、磁固相萃取、固相微萃取等,其关键是吸附介质。共价有机聚合物是一类通过共价键连接而成的有机多孔材料,具有质轻、稳定性好、比表面积大、结构可控、易于修饰等特性,是一类优异的新型吸附材料。该文综述了近年来共价有机聚合物(COPs)在食品安全分析前处理中的应用进展。共价有机聚合物及其功能化复合材料通过简单的装填、聚合反应或化学键合固定到小柱或毛细管柱中用作固相萃取的吸附介质;通过一锅法、原位还原法、原位生长法或共沉淀法生成具有磁性的固相萃取吸附介质;或者通过物理涂覆、化学键合、溶胶凝胶法及原位生长法制备固相微萃取纤维。基于以上高吸附容量共价有机聚合物的样品前处理技术,食品中农残兽残、添加剂、环境污染物及生物毒素等得到了有效富集。最后,展望了COPs在食品分析样品前处理应用中的发展方向:简单高效绿色制备方法的开发,功能化COPs的设计合成;萃取机理的研究;高通量、高灵敏度分析方法研究。这些研究将促进COPs在样品前处理领域获得更广泛的应用。     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

粮油作物及茶叶中农药多残留检测的前处理技术进展

综述了粮油作物和茶叶中农药多残留检测的前处理技术,包括超临界流体萃取、加速溶剂萃取、搅拌棒吸附萃取、分散固相萃取、固相微萃取和在线凝胶渗透色谱等样品前处理方式,并详细介绍了各种方法的原理、优点及适用范围,可为粮油作物和茶叶中农药多残留检测技术的发展提供参考。     

水浴加热密闭溶样石墨炉原子吸收光谱法测定化探样品中的痕量金

以王水、氟化钾、Fe3+溶液为溶剂,对化探样品进行水浴加热分解1.5 h,经泡沫塑料吸附后,于90℃以上硫脲溶液中解吸20 min,然后采用石墨炉原子吸收光谱仪测定其中的金含量。对仪器分析条件进行了优化。金的质量分数在0.1~100.0 ng/g范围内与吸光度呈良好的线性,线性相关系数r2=0.999 3,检出限为0.100 ng/g。该方法对金标准物质测定结果的相对标准偏差为5.96%~9.25%(n=12),对国家一级标准物质进行分析,测定结果与标准值相符合。该方法满足1∶50 000化探样品中痕量金的分析要求。     

Quantification of imatinib and related compounds using capillary electrophoresis-tandem mass spectrometry with field-amplified sample stacking

A quantification method for imatinib (IM), its major metabolite N-desmethyl imatinib (NDI), and a degradation by-product was developed using CE–MS combined with an online concentration technique. The use of multiple reaction monitoring (MRM)–MS/MS further improved the sensitivity of this technology. Liquid–liquid extraction (LLE) using tertiary butyl methyl ether yielded high recovery and reproducibility for the pretreatment of serum samples. The recovery rate exceeded 83% for all three analytes, and was 90% for IM. To improve quantification results, a conductivity-induced online analyte concentration technique, field-amplified sample stacking (FASS), was used. The S/N ratios were improved at least 10-fold when compared with conventional capillary zone electrophoresis. The detection limits were 0.2 ng/mL for IM, 0.4 ng/mL for NDI, and 4 ng/mL for the degradation by-product. These results are superior to those previously obtained by other reported methods. The new method was validated in terms of its selectivity, intra- and interday repeatability and accuracy, and sample storage stability, following the guidelines issued by the European Medicines Agency. Considering the convenient pretreatment procedure (LLE), superior sensitivity, and fast analysis speed (<15 min), this method can be useful in the determination of imatinib levels in blood.     

Derivatization-free determination of aminoglycosides by CZE–UV in pharmaceutical formulations

Aminoglycosides are a relevant class of antibiotics widely used by medics and veterinaries. There are a variety of reasons that make their determination relevant, such as quality control, environment and food contamination assessment, drug-release studies, among others. The lack of a chromophore makes aminoglycoside spectrophotometric detection particularly challenging, often requiring derivatization. In this work, an indirect detection method, making use of imidazole as a probe, applying CZE was successfully tested. It did not require derivatization, which simplified the sample preparation. Suitable figures of merit were obtained; recoveries between 95 and 105%, adequate repeatability and precision, correlation coefficients (r) above 0.998, and limits of detection (LODs) of 3.2 and 11 mg/L for gentamicin and paromomycin, respectively. As a proof-of-concept, it was also applied in a simple controlled release experiment that was well fitted using the Hill equation.     

基于电驱动在线快速分离富集技术的研究进展

样品前处理能将待测物从复杂基质中预先分离富集出来,以提高分析方法的灵敏度、选择性和准确性,是复杂样品分析的关键步骤。样品前处理是一个非自发的、从无序到有序的熵减过程,不仅费时费力,还极易引起误差。向体系输入能量和降低体系熵值可以增强分离富集效果,加快样品制备过程。将电场引入在线样品前处理,既能向体系做功,又能驱动样品定向迁移,使前处理的熵减过程快速顺利进行,是快速样品制备的有效途径。基于电驱动的在线分离富集技术综合了多种加速策略：（1）以电场形式向体系输入能量,加速传质和传热过程;（2）采用电渗流、电泳等电驱动定向流实现样品在分离、富集、检测各步骤之间的定向迁移,保证样品前处理与检测顺利进行;（3）利用在线联用技术集成样品前处理与分析检测各步骤,从而提高自动化程度,减少人为误差;（4）通过微型化装置或微萃取方法提高样品制备效率,缩短样品制备时间。该文总结了近10年与基于电驱动的在线快速分离富集技术相关的90多篇文献,综述了该技术领域的研究进展,探讨了电驱动毛细管在线快速分离富集技术、电驱动芯片在线快速分离富集技术和电驱动膜萃取在线分离富集技术各自的优势和潜力,并展望了该类技术的发展与应用趋势。     

液液萃取-场放大进样-毛细管电泳非接触式电导分离检测酱油中的安赛蜜

采用场放大进样（FASI）-毛细管电泳非接触式电导检测法（CE-C⁴D）,结合液液萃取（LLE）的样品净化预处理技术,分离检测了酱油中人工合成甜味剂安赛蜜。酱油样品经酸化后,用乙酸乙酯作为萃取剂,成功地消除了酱油中含有的大量无机盐等复杂基体对微量安赛蜜的干扰。实验对影响LLE萃取效率和FASI-CE-C⁴D分离检测的关键因素进行了讨论,特别是对样品净化前处理过程中萃取剂及用量、样品酸化pH值、萃取时间、萃取温度等条件进行了优化。结果表明,酱油中的安赛蜜可获得良好分离和灵敏检测,检出限和定量限分别为0.15 mg/kg和0.48 mg/kg。对市售酱油样品进行安赛蜜的加标回收测定,得到加标回收率为92.3%~108.1%,相对标准偏差＜8.0%。该法具有简单快速、灵敏高效、分析成本低的优点,能满足酱油中安赛蜜的分析检测要求。     

水和白酒中异味物质检测的研究进展

综述了水和白酒中异味物质检测的样品前处理方法(包括液液萃取、固相萃取、液相微萃取、固相微萃取、搅拌棒吸附萃取、吹扫捕集、顶空等)和检测方法(包括气相色谱法、气相色谱-质谱法、气相色谱-飞行时间质谱法)的研究进展(引用文献52篇)。     

石墨相氮化碳材料在样品前处理中的研究进展

作为一种新型非金属材料,石墨相氮化碳以其独特的优点,如简单的制备方法、优良的化学及热稳定性、良好的生物兼容性和无毒性等,受到越来越多的关注。石墨相氮化碳及其复合材料目前已被广泛应用于电催化、光催化、生物成像等领域。由于具有大的比表面积,同时又是富电子的疏水材料,石墨相氮化碳相关材料被认为是一种理想的样品前处理吸附剂。该文探讨了近年来石墨相氮化碳及其复合材料作为固相萃取、分散固相萃取、磁性固相萃取、固相微萃取吸附剂在样品前处理中的应用,并对未来的发展趋势和应用前景进行了展望,以期为相关领域的研究提供帮助。