聚乙烯醇/壳聚糖复合水凝胶的物理化学性质

测定了聚乙烯醇(PVA)和壳聚糖(CS)复合水凝胶的平衡含水量、熔融焓、等温溶胀动力学和非等温失水动力学等性质,讨论了水凝胶的组成和制备参数对这些性质的影响.结果显示:PVA/CS复合水凝胶具有适宜于软骨修复替代材料的网络结构和平衡含水量.CS与PVA复合减弱了凝胶的结晶度,但却增强了水与凝胶支架的相互作用.尽管水凝胶力学拉伸强度有所降低,但却优化了凝胶的生物相容性和降解能力.PVA/CS复合水凝胶是一种潜在的软骨修复材料,作为一种理论研究的模型体系,它将促进热力学在复杂医用材料方面的应用.     

A novel 3D Tesla valve micromixer for efficient mixing and chitosan nanoparticle production

Current three-dimensional micromixers for continuous flow reactions and nanoparticle synthesis are complex in structure and difficult to fabricate. This paper investigates the design, fabrication, and characterization of a novel micromixer that uses a simple spatial Tesla valve design to achieve efficient mixing of multiple solutions. The flow characteristics and mixing efficiencies of our Tesla valve micromixer are investigated using a combination of numerical simulations and experiments. The results show that in a wide range of flow rates, viscoelastic solutions with different concentrations can be well mixed in our micromixer. Finally, experiments on the synthesis of chitosan nanoparticles are conducted to verify the practicability of our micromixer. Compared with nanoparticles prepared by conventional magnetic stirring, the size of nanoparticles prepared by micromixing is smaller and the distribution is more uniform. Therefore, our Tesla valve micromixer has significant advantages and implications for mixing chemical and biological reactions.     

Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe₃O₄) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe₃O₄ interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography–diode array detector, satisfactory recoveries (89.1–103.9%) and an acceptable limit of detection (0.2–0.7 μg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.     

Preparation and Antimicrobial Activity of Chitosan and Its Derivatives: A Concise Review

Despite the advantages presented by synthetic polymers such as strength and durability, the lack of biodegradability associated with the persistence in the environment for a long time turned the attention of researchers to natural polymers. Being biodegradable, biopolymers proved to be extremely beneficial to the environment. At present, they represent an important class of materials with applications in all economic sectors, but also in medicine. They find applications as absorbers, cosmetics, controlled drug delivery, tissue engineering, etc. Chitosan is one of the natural polymers which raised a strong interest for researchers due to some exceptional properties such as biodegradability, biocompatibility, nontoxicity, non-antigenicity, low-cost and numerous pharmacological properties as antimicrobial, antitumor, antioxidant, antidiabetic, immunoenhancing. In addition to this, the free amino and hydroxyl groups make it susceptible to a series of structural modulations, obtaining some derivatives with different biomedical applications. This review approaches the physico-chemical and pharmacological properties of chitosan and its derivatives, focusing on the antimicrobial potential including mechanism of action, factors that influence the antimicrobial activity and the activity against resistant strains, topics of great interest in the context of the concern raised by the available therapeutic options for infections, especially with resistant strains.     

Synthesis of Chitosan-La2O3 Nanocomposite and Its Utility as a Powerful Catalyst in the Synthesis of Pyridines and Pyrazoles

Recently, the development of nanocatalysts based on naturally occurring polysaccharides has received a lot of attention. Chitosan (CS), as a biodegradable and biocompatible polysaccharide, is considered to be an excellent template for the design of a hybrid biopolymer-based metal oxide nanocomposite. In this case, lanthanum oxide nanoparticles doped with chitosan at different weight percentages (5, 10, 15, and 20 wt% CS/La₂O₃) were prepared via a simple solution casting method. The prepared CS/La₂O₃ nanocomposite solutions were cast in a Petri dish in order to produce the developed catalyst, which was shaped as a thin film. The structural features of the hybrid nanocomposite film were studied by FTIR, SEM, and XRD analytical tools. FTIR spectra confirmed the presence of the major characteristic peaks of chitosan, which were modified by interaction with La₂O₃ nanoparticles. Additionally, SEM graphs showed dramatic morphological changes on the surface of chitosan, which is attributed to surface adsorption with La₂O₃ molecules. The prepared CS/La₂O₃ nanocomposite film (15% by weight) was investigated as an effective, recyclable, and heterogeneous base catalyst in the synthesis of pyridines and pyrazoles. The nanocomposite used was sufficiently stable and was collected and reused more than three times without loss of catalytic activity.     

Flow-driven Surface Instabilities of Tubular Chitosan Hydrogel

Spatial structures break their symmetry under the influence of shear stress arising from fluid flow. Here, we present surface instabilities appearing on chitosan tubes when an acidic solution of chitosan with various molecular weight is injected into a pool of sodium hydroxide solution. At slow flow rates wrinkle-to-fold transition takes place along the direction of the flow yielding a banded structure. For greater injection rates we observe coexisting modes of wrinkles and folds which are stabilized to periodic wrinkles when the alkaline concentration is increased. The instabilities are characterized by the scaling laws of the pattern wavelength and amplitude with the tube characteristics. Our experimental adaptation of mechanical instabilities provides a new in situ method to create soft biomaterials with the desired surface morphology without the use of any prefabricated templates.