Poly(N-isopropylacrylamide). I. Interactions with sodium dodecyl sulfate measured by conductivity

Conductometric titration of poly(N-isopropylacrylamide) (polyNIPAM) with sodium dodecyl sulfate (SDS) gave two apparent transitions labeled C1 and C2. The C1 transition was independent of polyNIPAM concentration in the 0.05–0.3 wt % range, whereas C2 was proportional to the polymer concentration. C1 corresponded to the onset of binding of surfactant with polymer. Arguments based on a simple mass action model for micellization are presented to show that C2, the second transition, is not due to any simple explanation such as being the point above which only free micelles are formed with surfactant addition. The cloud point of polyNIPAM increased with the amount of bound surfactant. This was attributed to electrostatic contribution of bound sulfate groups to the increased solubility of polyNIPAM. © 1993 John Wiley & Sons, Inc.     

Exploration of the Crystal Structure and Thermal and Spectroscopic Properties of Monoclinic Praseodymium Sulfate Pr2(SO4)3

Praseodymium sulfate was obtained by the precipitation method and the crystal structure was determined by Rietveld analysis. Pr₂(SO₄)₃ is crystallized in the monoclinic structure, space group C2/c, with cell parameters a = 21.6052 (4), b = 6.7237 (1) and c = 6.9777 (1) Å, β = 107.9148 (7)°, Z = 4, V = 964.48 (3) ų (T = 150 °C). The thermal expansion of Pr₂(SO₄)₃ is strongly anisotropic. As was obtained by XRD measurements, all cell parameters are increased on heating. However, due to a strong increase of the monoclinic angle β, there is a direction of negative thermal expansion. In the argon atmosphere, Pr₂(SO₄)₃ is stable in the temperature range of T = 30–870 °C. The kinetics of the thermal decomposition process of praseodymium sulfate octahydrate Pr₂(SO₄)₃·8H₂O was studied as well. The vibrational properties of Pr₂(SO₄)₃ were examined by Raman and Fourier-transform infrared absorption spectroscopy methods. The band gap structure of Pr₂(SO₄)₃ was evaluated by ab initio calculations, and it was found that the valence band top is dominated by the p electrons of oxygen ions, while the conduction band bottom is formed by the d electrons of Pr³⁺ ions. The exact position of ZPL is determined via PL and PLE spectra at 77 K to be at 481 nm, and that enabled a correct assignment of luminescent bands. The maximum luminescent band in Pr₂(SO₄)₃ belongs to the ³P₀ → ³F₂ transition at 640 nm.     

Comparing Efficiency of Lysis Buffer Solutions and Sample Preparation Methods for Liquid Chromatography–Mass Spectrometry Analysis of Human Cells and Plasma

The use of a proper sample processing methodology for maximum proteome coverage and high-quality quantitative data is an important choice to make before initiating a liquid chromatography–mass spectrometry (LC–MS)-based proteomics study. Popular sample processing workflows for proteomics involve in-solution proteome digestion and single-pot, solid-phase-enhanced sample preparation (SP3). We tested them on both HeLa cells and human plasma samples, using lysis buffers containing SDS, or guanidinium hydrochloride. We also studied the effect of using commercially available depletion mini spin columns before SP3, to increase proteome coverage in human plasma samples. Our results show that the SP3 protocol, using either buffer, achieves the highest number of quantified proteins in both the HeLa cells and plasma samples. Moreover, the use of depletion mini spin columns before SP3 results in a two-fold increase of quantified plasma proteins. With additional fractionation, we quantified nearly 1400 proteins, and examined lower-abundance proteins involved in neurodegenerative pathways and mitochondrial metabolism. Therefore, we recommend the use of the SP3 methodology for biological sample processing, including those after depletion of high-abundance plasma proteins.     

钾明矾蓄热性能的研究与改善

钾明矾(KAl(SO4)2·12H2O)有较高的潜热和良好的导热性(熔化热232.4kJ/kg,导热系数为0.55W/m·K),熔点为91℃,是中低温相变材料中较有开发价值的一种.但是它的过冷度高达19.8℃,并且由于相变过程伴随着结晶水的蒸发使无机盐的使用寿命大大降低.本文通过冷指法及添加成核剂的方法对硫酸铝钾的过冷现象进行了研究,结果表明成核剂NiSO4·6H2O、MgCl2·6H2O能较好的改善过冷现象,当MgCl2·6H2O的添加量为2;时可使过冷度降为零,且能保持钾明矾的相变温度而不使其降低.利用MgCl2·6H2O具有很强的吸湿性,可以补充相变过程中损失的水分,使相变材料的使用寿命大大提高.     

A convenient synthesis of phenols

Abstract

Anilines are rapidly, often within 60?minutes, converted into the corresponding phenols in up to 87% isolated yield. The presented experimentally simple protocol display broad compatibility with a variety of functional groups, and in particular, well suited for the preparation of methyl-substituted phenols. Such phenols are not easily available by other synthetic approaches. The formation of phenolic radical coupling products was not observed even for activated anilines using this open flask method.     

Three component reactions：An efficient and green synthesis of 3, 4-dihydropyrimidin-2-(1H)-ones and thiones using silica gel-supported L-pyrrolidine-2-carboxylic acid-4-hydrogen sulfate

An environmentally benign aqueous protocol for the synthesis of 3,4-dihydropyrimidin-2-(1H)-ones and thiones promoted by a green catalyst,silica gel-supported L-pyrrolidine-2-carboxylic acid-4-hydrogen sulfate,has been developed.The use of nontoxic,thermally stable and inexpensive amino acid catalyst makes the process simple with minimal amount of chemical waste.Compared with classical Biginelli reaction conditions,this new method has the advantages of high yields and simple workup procedures.     

Can a ‘magnesium sulfate admixtured l-threonine’ crystal be grown by slow evaporation solution growth method?

Slow evaporation of an aqueous solution containing l-threonine and magnesium sulphate heptahydrate, results in the fractional crystallization of the less soluble l-threonine crystal and not any novel optoelectronic ‘magnesium sulfate admixtured l-threonine’ crystal as reported by Puhal Raj et al. in Optik, 124 (2013) 6887–6891.     

Radiation induced polymerization of Vinylbenzoate–II. Study of the molecular weights of polymers

Abstract

In this study, the molecular weights of the polymer from vinyl benzoate has been reported for different dose rates and different temperatures. The mol.wt. remains around 4000. With increasing dose, the molecular weight increases to about 14,000. The degrees of polymerization and the kinetic chain lengths calculated from the experimentally determined G _R values have been compared which show that the kinetic chain length is larger than the D ^? Pn.

From a plot of the (D ^? Pn)^?1 vs. R _p , an intercept is obtained which is equal to 3.25 × 10^?2 which is higher than obtained in conventional polymerization. By examining the effect of temperature on mol.wt., the dependence of R _p on dose rate and the absence of induction period it has been concluded that chain transfer occurs to impurities that are generated during radiolysis.     

ETUDE STRUCTURALE DE QUELQUES SPIROPHOSPHORANES A LIAISON P–C EXOCYCLIQUE

Abstract

The PMR spectra of some spirophosphorans containing the P–C bond are analysed. The results allow us to determine the stereochemistry of these compounds (conformation, stereoisomerism).

Le spectre de RMP de quelques spirophosphoranes à liaison P–C est analysé. Les résultats sont utilisés pour préciser la stéréochimie de ces composés (conformation, stéréoisomérie).     

MAGNESIUM HYDROGEN SULFATE POWDER CATALYZED STEREOSELECTIVE CONVERSION OF DIALKYL 2-(IMIDO-N -YL)-3-(TRIPHENYLPHOSPHORANYLIDENE)- BUTANEDIOATES TO ELECTRON-POOR (Z)-N -VINYLIMIDES IN SOLVENT-FREE CONDITIONS

Magnesium hydrogen sulfate powder was found to catalyze stereoselective conversion of dialkyl 2-(imido-N-yl)-3-(triphenylphosphorany-lidene)butanedioates to electron-poor (Z)-N-vinylimides in solvent-free conditions at 95°C 1 h in high conversions. Microwave also was found to catalyze the same reactions in the presence of magnesium hydrogen sulfate powder in solvent-free conditions in 3 min.