Coating and water permeation properties of SiO2 thin films prepared by the sol-gel method on nylon-6 substrates

Nylon-6 substrates were coated with SiO₂ thin films by the sol-gel method and their water permeability coefficient was evaluated. Methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) were used as starting materials. The addition of MTES to TEOS has enabled the formation of crack-free thin films on the substrates. The thin films strongly adhered to the substrates. The water permeability coefficients of nylon-6 substrates coated with these thin films decreased with the increase in the ratio of TEOS to the total alkoxides. The pretreatment of the nylon-6 substrates with -aminopropyltriethoxysilane was found to be effective to suppress the water permeability. The water permeability was suppressed by about 40% under the optimal condition.     

Preparation and partial characterization of a soluble site-to-site directed enzyme complex composed of alcohol dehydrogenase and lactate dehydrogenase

A soluble, bifunctional enzyme complex has been prepared by crosslinking lactate dehydrogenase and alcohol dehydrogenase with glutaraldehyde. The crosslinking was performed on a solid phase while the active sites of alcohol dehydrogenase and lactate dehydrogenase were held adjacent to one another with the aid of a bis-NAD analog. Subsequently, the enzyme complex was released from the solid phase. The soluble enzyme complex was then purified by using NAD-Sepharose as an affinity adsorbent. Based on gel filtration experiments, the complex was estimated to consist of one of each dehydrogenase. By using a third enzyme, lipoamide dehydrogenase, which competes with lactate dehydrogenase for NADH produced by alcohol dehydrogenase, the effect of site-to-site orientation was studied. It was found that about 83% of the NADH produced by alcohol dehydrogenase was oxidized by site-to-site oriented lactate dehydrogenase compared to a figure of only about 61% obtained in an identical system of separate enzymes. This indicates that given two alternative routes, the preference for the one to lactate dehydrogenase over the one to lipoamide dehydrogenase is enhanced when lactate dehydrogenase and alcohol dehydrogenase are site-to-site oriented.     

Printed plastic electronics and paperlike displays

Plastic electronic materials and high‐resolution printing methods may be important technologies for new classes of consumer electronic devices that are lightweight, mechanically flexible and bendable, and that can cover large areas at low cost. This article summarizes some of our recent work in this area. It focuses on the materials and patterning techniques that we used to produce plastic active‐matrix backplane circuits for a type of paperlike display. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3327–3334, 2002     

W／O型微乳液中超氧化物阴离子的产生——微环境中SOD酶活性测定方法 …

分别在水溶液中和W／O型CTAB／正戊醇／异辛烷／水微乳液体系中研究了测定SOD酶活性的邻苯三酚法,发现在反向微乳液中,"小水池"的低介电常数和pH抑制了底物超氧化物阴离子O2-·的产生．只有提高外加缓冲液的pH或"小水池"的水化度,才能得到所需浓度的O2-·,从而初步解决了在微乳液中SOD作用底物的产生问题,为在微乳液中准确测定SOD酶活性创造了条件．     

Characterization of the Converging Jet Region in a Triple Torch Plasma Reactor

Enthalpy probe measurements were taken of the converging plasma plume in a triple torch plasma reactor and related to substrate heat flux measurements. Results show excellent entrainment of process gases injected into the converging plasma plume by way of the central injection probe. At lower pressures (40 kPa), the plasma volume is equivalent to at least a 3 cm diameter, 4 cm long cylinder, with relatively uniform temperature, velocity, and substrate heat flux profiles when compared to a typical dc arc jet. Converging plasma plume size, substrate heat flux, and enthalpy profiles are also shown to be a strong function of applied system power. Substrate heat flux measurements show smaller radial gradients than enthalpy probe measurements, because of the high radial velocity component of gases above the substrate boundary layer. Enthalpy probe measurements were also conducted for diamond deposition conditions and approximate temperature and velocity profiles obtained. Problems with the uniform gas mixture assumption prohibited more accurate measurements. Reproducibility of enthalpy measurement results was shown with an average standard deviation of 11.8% for the velocity and 7.6% for the temperature measurements.     

Determination of trace silver by solid substrate room temperature phosphorescence quenching method based on lead carboxymethyl cellulose particles (Pb(CMC)2) containing luminescent salicyl fluorenes molecules

Luminescent particles of lead carboxymethyl cellulose (Pb(CMC)2) containing salicyl fluorones (THBF), Pb(CMC)2-THBF were synthesized by the sol-gel method, using sodium carboxymethyl cellulose (NaCMC) as precursor and Pb2+ as precipitant. Pb(CMC)2-THBF can emit the intense and stable solid substrate room temperature phosphorescence (SS-RTP) on filter paper. And EDTA can chelate Pb2+ in Pb(CMC)2-THBF, causing it to decompose into aqueous soluble components PbY2-, CMC- and THBF, which can react with Ag+ to form Ag(CMC)2-THBF, causing the decrease of phosphorescence intensity. Based on the facts above, a new method for the determination of trace silver by SS-RTP quenching method was established. The linear range of this method is 8.0-40.0 fg spot(-1) (20.0-100.0 pg ml(-1)), with a detection limit (LD) of 2.2 fg spot(-1) (corresponding to a concentration range of 5.5 x 10(-13) g ml(-1)), and the regression equation of working curve is DeltaI(p) = 12.56 + 0.5527C(Ag+) (fg spot(-1), 0.4 microl spot(-1)), n = 8, r = 0.9992. This method has been applied to the determination of trace silver in human hair and tea sample with satisfactory results. The mechanism of SS-RTP emission is also discussed.     

Liquid fluidized bed starter culture ofTrichoderma reesei for cellulase production

A starter culture ofTrichoderma reesei (Rut-C30) prepared in a liquid fluidized bed reactor (LFBR) gave better growth and greater cellulase production in submerged fermentation than a conventional shake flask inoculum. The LFBR starter was prepared by first coatingT. reesei spores to 0.25 mm size corncob (1.0x10⁸g^-1) in a medium containing 1.0% corncob, 0.5 gL^-1 xylose and 0.1 gL^-1 lactose in a balanced salt solution, then fluidizing the particles in the LFBR for 36 h to allow germination of the spores, and covering the particles with an approx 30 μm thick biofilm. This biofilm that developed in constant adherence to the lignocellulosic carrier, apparently became well adapted to grow rapidly on insoluble cellulose substrates (Solca Floc), and had the enzymes of the cellulase complex induced for increased cellulase production. The LFBR starter used in a stirred tank reactor (STR) gave 15 gL^-1 biomass production and 6.5 IU mL^-1 overall cellulase activity with a volumetric productivity of 64 IU L^-1h^-1 in a 5 d fermentation, compared with a 7 d shake flask inoculum that gave 11 gL^-1 biomass and 3.2 IU mL^-1 cellulase activity, with a volumetric productivity of 31IU L^-1h^-1. The LFBR starter culture retained its viability in dry storage for 6–9 mo.     

Novel Electroless Deposition of Cu<Subscript>3</Subscript>Se<Subscript>2</Subscript> Film on Silicon Substrate by a Simple Galvanic Displacement Process

A novel electroless deposition method for depositing highly uniform adhesive thin films of copper selenide (Cu₃Se₂) on silicon substrates from aqueous solutions is described. The deposition is carried out by two coupled galvanic reactions in a single deposition bath containing copper cations, hydrogen fluoride, and selenous acid: the galvanic deposition of copper on silicon and the subsequent galvanic reaction between the deposited copper with selenous acid in the deposition bath. The powder X-ray diffraction and scanning electron microscopy are used to characterize and examine the deposited films.     

Simultaneous determination of theophylline,tolbutamide, mephenytoin,debrisoquin, and dapsone in human plasma using high‐speed gradient liquid chromatography/tandem mass spectrometry on a silica‐based monolithic column

Theophylline, tolbutamide, mephenytoin, debrisoquin, and dapsone are marker substrates for CYP1A2, CYP2C9, CYP2C19, CYP2D6, and CYP3A4, respectively. A silica‐based monolithic column (Chromolith SpeedROD RP‐18e, 50×4.6 mm) was used to separate these five marker substrates of cytochrome P450 within only 84 s. Linear gradient elution was from acetonitrile‐water‐formic acid (10 : 90 : 1, v/v/v) to acetonitrile‐water‐formic acid (90 : 10 : 1, v/v/v) in 1.4 min. The flow rate was 2.5 mL/min. The retention time was 0.52 min for theophylline, 0.67 min for debrisoquin, 0.78 min for dapsone, 0.96 min for mephenytoin, and 1.13 min for tolbutamide. Detection was by tandem mass spectrometry using a PE Sciex API 3000 mass spectrometer with a Turbo‐Ionspray source in positive mode. A simple protein precipitation method was used. This method was validated over the concentration range of 5–2000 ng/mL based on the sample volume of 0.1 mL.     

微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果.本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响.在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论.