Adsorption of dicarboxylates on nano-sized gibbsite particles: effects of ligand structure on bonding mechanisms

The adsorption of the dicarboxylates o-phthalate, maleate, fumarate, malonate, and oxalate (representing ligands with the general composition ⁻O₂C---C_n---CO₂⁻; n=0, 1, or 2) on gibbsite were studied by means of quantitative batch adsorption experiments and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The interpretations of ATR-FTIR spectra were aided by comparison with IR spectra of solution species and by results from theoretical frequency calculations. The main objectives of the study were to identify the molecular level bonding mechanisms of the dicarboxylates to gibbsite, and to investigate how these were influenced by the composition and structure of the ligands. Carboxylates with n=2 formed predominantly outer sphere complexes, whereas the importance of inner sphere complexes progressively increased for n=1 and 0. The inner sphere structures were identified as mononuclear chelates with one oxygen from each carboxylate group bonded to Al(III) at the surface. This showed the importance of chelate ring structure for the formation of inner sphere surface complexes, with stabilities of the complexes increasing in the order seven-membered ring less than six-membered ring less than five-membered ring. For ligands with n=2 only small variations in surface speciation were observed as a function of steric factors; irrespective of the relative positions of the carboxylate groups and bulkiness of the ligands outer sphere bonding is the dominating adsorption mode. Adsorption experiments were also conducted with gibbsite particles exhibiting differences in shape and surface roughness. These experiments showed that inner sphere complexes were favored on the less well-developed and more irregular gibbsite particles.     

Time resolved spectroscopic NMR imaging using hyperpolarized Xe

We have visualized the melting and dissolution processes of xenon (Xe) ice into different solvents using the methods of nuclear magnetic resonance (NMR) spectroscopy, imaging, and time resolved spectroscopic imaging by means of hyperpolarized ¹²⁹Xe. Starting from the initial condition of a hyperpolarized solid Xe layer frozen on top of an ethanol (ethanol/water) ice block we measured the Xe phase transitions as a function of time and temperature. In the pure ethanol sample, pieces of Xe ice first fall through the viscous ethanol to the bottom of the sample tube and then form a thin layer of liquid Xe/ethanol. The xenon atoms are trapped in this liquid layer up to room temperature and keep their magnetization over a time period of 11 min. In the ethanol/water mixture (80 vol%/20%), most of the polarized Xe liquid first stays on top of the ethanol/water ice block and then starts to penetrate into the pores and cracks of the ethanol/water ice block. In the final stage, nearly all the Xe polarization is in the gas phase above the liquid and trapped inside the pores. NMR spectra of homogeneous samples of pure ethanol containing thermally polarized Xe and the spectroscopic images of the melting process show that very high concentrations of hyperpolarized Xe (about half of the density of liquid Xe) can be stored or delivered in pure ethanol.     

Infrared facility at the Canadian light source

The Canadian Light Source (CLS) is constructing two beamlines for Infrared Spectroscopy using synchrotron radiation (IRSR). One will supply mid-Infrared (2–25 μ) light to a Fourier Transform Infrared (FTIR) spectrometer and microscope for biological applications. The second will have a high resolution FTIR spectrometer for gas-phase and surface spectroscopy in the far-Infrared (beyond 25 μ). The Infrared beamlines will use dipole bending magnet radiation from a special bend magnet port design which provides a 50 mrad square acceptance. Issues with the first mirror and photon mask design, as well as the beamline layout and features are discussed.     

旋转带电体磁矩计算的若干法则与算例

本文在文献 [1]、[2 ]等的基础上给出关于旋转带电体的磁矩计算的若干法则 ,均以定理形式表达 ,并列表枚举其相关算例     

Investigation on ultrafast thrid—order optical nonlinearity of metal（dmit）2／mnt）2 Charge transfer complexes

We have investigated the transient third-order optical nonlinearity of the solutions of Metal(dmit)2/(mnt)2 salts in acetone by employing femtosecond optical Kerr gate measurement at 830nm wavelength.An order of enhancement on the second-order hyperppolarizability is found for the above salts with central atoms of Cu and Ni.We have suggested an explanation for the enhancement based on the extension of electronic conjugation by the entring Cu or Ni atom.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Preparation and characterization of poly(amidoamine) dendrimers functionalized with a rhenium carbonyl complex and PEG as new IR probes for carbonyl metallo immunoassay

The first poly(amidoamine) (PAMAM) dendrimers tethered with both (η⁵-cyclopentadienyl) rhenium tricarbonyl (CpRe(CO)₃) units and polyethylene glycol (PEG) chains were prepared and characterized by combining NMR spectroscopy and Fourier-transform IR spectroscopy. Grafting of CpRe(CO)₃ units was achieved by reductive amination of formyl-CpRe(CO)₃ with the peripheral amines of generation 3 and 4 PAMAMs to yield dendrimers labeled with a variable number of CpRe(CO)₃ units, ranging from 8 to 14 for PAMAM-G3 and 17-30 for PAMAM-G4. PEG chains of different lengths were then attached to some of the remaining peripheral amines, and their respective ability to improve the solubility of the metallodendrimers in aqueous buffered media was evaluated. These metallodendrimers represent new infrared probes designed to be coupled to immunological reagents for the amplification of the IR signal in carbonyl metallo immunoassay (CMIA).     

Pressure-induced polymorphism in enstatite (MgSiO3) at room temperature: clinoenstatite and orthoenstatite

The phase transition of a synthetic clinoenstatite in a diamond-anvil cell has been studied by using Raman spectroscopy at various pressures and room temperature. The phenomena observed in clinoenstatite have been compared with that observed in orthoenstatite. It is found that the pressure-induced phase transitions in the two enstatites are reversible, but with different transition pressures and transition behavior. An analysis of Raman spectra has revealed that the two enstatites have different high-pressure polymorphs. This result suggests that the space group of the high-pressure polymorph of orthoenstatite is not of C2/c, and that orthoenstatite and orthoferrosilite have different transition routes at room temperature and high pressure. The compressional behavior of the high-PC2/c enstatite is also discussed according to the pressure dependences of Raman frequencies.     

Ground state parameters of BiH3 from infrared and millimeter-wave spectra: ground state and equilibrium structures

Unstable, short-lived BiH₃ has been synthesized and investigated by rotational spectroscopy in the range 158 (J=1-0) to 1280 GHz (J=8-7). Quadrupole and spin-rotation hyperfine structures (eQq=584.676(96) MHz), and the A₁A₂ splitting of the K=3 ground state level, have been resolved. By merging the pure rotational data with 1764 ground state combination differences obtained from the analysis of high resolution Fourier transform infrared spectra of the ν₁-ν₄ bands [J. Mol. Spectrosc. (2004) (in press)] spanning J and K values up to 16 and 14, respectively, with 0?ΔK?9, the ground state rotational and centrifugal distortion constants up to octic and sextic terms for reductions A and B, respectively, have been determined. Of the reductions of the ground state rovibrational Hamiltonian, reduction B including ε rather than h₃ as off-diagonal element is clearly favored. An experimental r₀ structure of the very-near spherical oblate symmetric top BiH₃, r(BiH)=178.82 pm and α(HBiH)=90.320°, has been deduced from the rotational constants B₀=2.64160172(18) and C₀=2.6010403(31) cm⁻¹. The derived experimental r_e structure, r_e(BiH)=177.834(50) pm and α_e(HBiH)=90.321(10)°, was determined. This is in excellent agreement with the most recent ab initio structure, r_e(BiH)=177.84 pm, and α_e(HBiH)=90.12°.     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.