Co‐ and Counterion Effect on the Micellization Characteristics of Dodecylpyridinium Chloride

Micellization parameters, critical micelle concentration (cmc), degree of counterion dissociation (α), aggregation number (n), critical packing parameter, and hydrophobic core volume of Dodecylpyridinium chloride (DPC) micelles were determined in presence of varying concentrations of sodium chloride (NaCl), sodium acetate (SAc), sodium propionate (SPr), ethylammonium chloride (EACl), diethylammonium chloride (DEACl), tetraethylammonium chloride (TEACl), and propylammonium chloride (PACl) through conductometric investigations at 298.15 K. The resulting data suggests that both counter and coions affect the cmc values‐cmc depressing tendency of the salts varies in order PACl≈NaCl>EACl>DEACl>TEACl>SPr>SAc, while the degree of counterion dissociation is dependent on the nature and concentration range of the added salt. Increasing salt concentration increases the relative hydrophobic volume of the micelles and coion has not much effect on aggregation number.     

Linear and Cyclic Hybrids of Alternating Thiophene–Amino Acid Units: Synthesis and Effects of Chirality on Conformation and Molecular Packing

The dipeptide isostere 5‐aminothiophene carboxylic acid has been combined with L ‐phenylalanine moieties to provide linear and cyclic hybrid oligopeptides. A suitable protecting group strategy and appropriate coupling methods have been developed to guarantee a high degree of enantiopurity of the resulting amides. Cyclic tetraamides have been efficiently obtained by macrocyclization of the linear derivatives. In the case of racemized cyclization precursors, two diastereomeric macrocycles (S,S/R,R and meso) have been isolated. Their crystal structures show clear effects of the stereogenic centers on the ring conformations and molecular packing.     

Comparison of different types of outlet frits in slurry‐packed capillary columns

Fused‐silica capillary columns for high‐performance liquid chromatography with 320 and 250 μm inner diameter were prepared by slurry packing with 5 and 3 μm Nucleosil C₁₈ stationary phase. Different types of mechanical and monolithic outlet frits were used and their influence on the resulting column performance was evaluated. Columns with quartz wool exhibited symmetrical peaks and low theoretical plate height, and the preparation time was short. The performance of monolithic frits varied based on type of monolith, length of the frit, and silanization procedure. The best frit performed similarly to the quartz wool ones, but the preparation took several hours. Their main advantage lies in the possibility of on‐column detection, because the detection window can be burnt immediately behind the frit.     

Three trithiadiazepines and a trithiatriazepine

The structures of 6‐nitro‐1,3λ⁴δ²,5,2,4‐trithiadiazepine [C₂HN₃O₂S₃, ( 1 )], 6,7‐dinitro‐1,3λ⁴δ²,5,2,4‐trithiadiazepine [C₂N₄O₄S₃, ( 2 )], 1,3λ⁴δ²,5,2,4‐trithiadiazepine‐6,7‐dicarbonitrile [C₄N₄S₃, ( 3 )] and 7‐acetyl‐1,3λ⁴δ²,5,2,4,6‐trithiatriazepine [C₃H₃N₃OS₃, ( 4 )] presented here include the most precise determinations of these seven‐membered 10 π‐electron aromatic ring systems published to date. Both ( 2 ) and ( 3 ) are sited around crystallographic twofold axes with half a molecule per asymmetric unit. Comparison with other published derivatives of these rings reveals the effect of substituents on bonding, conformations and intermolecular interactions, including π‐stacking. The deformation density analysis of ( 2 ) is consistent with the expected bonding electron density from other theoretical and experimental studies.     

The Radical Anion,Dianion and Electron Transport Properties of Tetraiodotetraazapentacene

Tetraiodotetraazapentacene I₄TAP , the last missing derivative in the series of halogenated silylated tetraazapentacenes, was synthesized via condensation chemistry from a TIPS-ethynylated diaminobenzothiadiazol in three steps. Single and double reduction furnished its air-stable monoanion and relatively air-stable dianion, both of which were characterized by crystallography. All three species are structurally and spectroscopically compared to non-halogenated TAP and Br₄TAP . I₄TAP is an n-channel material in thin-film transistors with average electron mobilities exceeding 1 cm² (Vs)⁻¹.     

Temperature and Composition Dependent Optical Properties of CdSe/CdS Dot/Rod-Based Aerogel Networks

Employing nanocrystals (NCs) as building blocks of porous aerogel network structures allows the conversion of NC materials into macroscopic solid structures while conserving their unique nanoscopic properties. Understanding the interplay of the network formation and its influence on these properties like size-dependent emission is a key to apply techniques for the fabrication of novel nanocrystal aerogels. In this work, CdSe/CdS dot/rod NCs possessing two different CdSe core sizes were synthesized and converted into porous aerogel network structures. Temperature-dependent steady-state and time-resolved photoluminescence measurements were performed to expand the understanding of the optical and electronic properties of these network structures generated from these two different building blocks and correlate their optical with the structural properties. These investigations reveal the influence of network formation and aerogel production on the network-forming nanocrystals. Based on the two investigated NC building blocks and their aerogel networks, mixed network structures with various ratios of the two building blocks were produced and likewise optically characterized. Since the different building blocks show diverse optical response, this technique presents a straightforward way to color-tune the resulting networks simply by choosing the building block ratio in connection with their quantum yield.     

双分散颗粒体系在临界堵塞态的结构特征

堵塞行为是颗粒体系中一种常见的现象,其力学性质与堆积结构的关联非常复杂.本文采用离散元法研究了由两种不同半径颗粒组成的二维双分散无摩擦球形颗粒体系在临界堵塞态所呈现的结构特征,讨论了大小颗粒粒径比与大颗粒百分比对临界堵塞态的影响.数值模拟结果表明,当粒径比小于1.4时,临界平均接触数与大颗粒百分比关系不大,当粒径比大于1.4时随着大颗粒百分比的增大临界平均接触数先减小再增大.而临界体积分数在粒径比小于1.8时随着大颗粒百分比的增加先减小后增大,大于1.8时又基本不随大颗粒百分比而变化.大颗粒百分比在接近0或1时,系统近似为单分散体系,临界平均接触数与体积分数基本不随半径比的增大而变化;在接近0.5时,临界平均接触数随着半径比的增大逐渐减小,而临界体积分数则是先减小后增大.文中对大-小颗粒这一接触类型的百分比也进行了探讨,其值随着大颗粒百分比的增大呈二次函数的变化趋势,粒径比对这一变化趋势只有较小的影响.     

Precision and sensitivity optimization of quantitative measurements in solid state NMR

This work presents a methodology for optimizing the precision, accuracy and sensitivity of quantitative solid state NMR measurements based on the external reference method. It is shown that the sample must be exclusively located within and completely span the coil region where the NMR response is directly proportional to the sample amount. We describe two methods to determine this "quantitative" coil volume, based on whether the probe is equipped or not with a gradient coil. In addition, to improve the sensitivity and the accuracy, an optimum rotor packing design is described, which allows the sample volume of the rotor to be matched to the quantitative coil volume. Experiments conducted on adamantane and NaCl, which are representative of a soft and hard material, respectively, show that one order of magnitude increase in experimental precision can be achieved with this methodology. Interestingly, the precision can be further improved by using the ERETIC method in order to compensate for most instrumental instabilities.     

Patterned growth of zinc oxide nanorods using poly(vinyl alcohol)-N-methyl-4(4′-formylstyryl)pyridinium methosulfate acetal and zinc acetate mixture as a seed layer

This paper reports a new method for fabricating two-dimensional ZnO nanorod patterns. A water soluble mixture of poly(vinyl alcohol)-N-methyl-4(4′-formylstyryl)pyridinium methosulfate acetal (PVA-Sbq) and zinc acetate (ZnA) was used as a negative photoresist to produce the desired patterns using conventional photolithography. Hydrothermally-grown ZnO nanorods were grown selectively on the calcined PVA-Sbq/ZnA patterns. The appropriate concentration of PVA-Sbq and ZnA that can produce the desirable seed layer pattern was determined experimentally. Furthermore, the effects of the calcination time on the morphology and vertical alignment of ZnO nanorods were investigated. The vertically-aligned ZnO nanorods were generated by sufficient calcination of the patterned seed layer. On the other hand, the aspect ratio of ZnO nanorods decreased slightly with increasing calcination time. This new approach provides a simple and cost-effective method for fabricating ZnO nanorod patterns which can be beneficial in various solid-state devices and optoelectronic applications.