考虑运动受限的履带式移动机器人轨迹跟踪控制

针对履带式移动机器人的轨迹跟踪控制问题进行研究,首先,建立了履带式移动机器人的运动学模型和跟踪误差模型;其次,设计了转速有限时间控制和线速度滑模控制的轨迹跟踪控制律,并给出了考虑运动受限作用下的控制律修正表达式;最后,基于MATLAB对所提控制律进行仿真,对比分析了不考虑运动受限情况下跟踪控制效果;结果表明,设计的跟踪控制律能够实现履带式移动机器人对圆轨迹的有效跟踪,且考虑运动受限作用的控制律更加符合实际;文章研究分析了运动受限作用对于移动机器人轨迹跟踪控制的影响,分析结果对其他移动机器人的运动控制研究具有参考价值。     

基于遗传算法的变电站巡检机器人任务路径规划方法研究

近年来,随着变电站巡检机器人在变电站中的广泛使用,巡检机器人路径规划问题越来越成为亟待解决的问题。巡检机器人在已知的拓扑地图中标记了待执行巡检任务的停靠点,不同任务需要从初始点出发经过不同的一系列停靠点再返回初始点,如何规划路径是机器人面临的问题。首先分析了路径规划面临的问题,然后通过分析拓扑地图的特征,对地图进行等价简化,再对问题进行建模使用遗传算法求解巡检任务路径规划的近似最优解。通过仿真实验证明,提出的基于遗传算法的路径规划方法是可行有效的,为变电站巡检机器人任务路径规划提供了一种有效方法。     

模糊逻辑在机器人逆运动学求解中的应用

冗余机器人逆运动学求解的方法很多，多数都不能很好的满足实时控制的要求，本文运用模糊逻辑的思想，构造了一种逆运动学求解方法，其计算量较其它方法大大减小，且满足实时控制的要求，仿真结果也证明了该方法的可行性。     

Minimal dynamic characterization of tree-like multibody systems

The dynamic model of tree-like multibody systems is linear with respect to the parameters of mass distribution for instance when barycentric parameters are used. Thus, assuming that the parameters related to the kinematics are perfectly known, these quantities can be estimated through linear regression techniques. The necessary data are obtained by measuring the joint forces and/or torques and the resulting motion given in terms of positions, velocities and accelerations. An alternative method uses measurements of the reaction forces and torques applied to the bedplate.The linearity of the dynamic and reaction models with respect to the barycentric quantities does not however imply that the latter constitute the minimum set of parameters characterizing the mass distribution of the system. In other words, some barycentric parameters may disappear from the models or may be redundant in the sense that they appear only via linear combinations. In the first case they are not identifiable, while in the second case the linear regression technique leads to estimated values which are correct for the combinations but can be erroneous for the individual parameters.The various options taken to derive the dynamic and reaction models by use of the ROBOTRAN programme are briefly reviewed. Then the rules leading to the minimal parametrization are presented and illustrated by means of a practical example related to a robot calibration problem.     

道路约束条件下的移动机器人跟踪

为提高移动机器人的位置估计精度和跟踪效果,提出一种基于道路约束条件下的移动机器人鲁棒约束H∞滤波(CHF)跟踪算法.首先,将机器人移动的道路网络作为跟踪的约束条件,并利用当前统计模型对机器人的运动进行建模.其次,将道路约束条件作为机器人跟踪的非线性状态约束,利用最小协方差估计推导了鲁棒CHF递推方程.通过拉格朗日乘子法对非线性约束优化估计问题进行求解,并利用约束信息对CHF算法的状态更新过程进行了改进.最后,通过对CHF算法和无约束的H∞滤波算法的跟踪性能进行了对比分析和验证.仿真结果表明,该算法可以实现机器人的跟踪,且跟踪精度优于HF算法.     

一种机器人支撑臂的力学分析与距离选优

采用Adams虚拟样机仿真技术对一种机器人的主要构件进行建模,分析了模型前后支撑臂的受力情况;分别建立了7种前后两臂之间不同距离的模型,通过数据对比,优选出使电机功率输出最小的两臂间距离.     

Motion Planning for a Wheeled Robot (Kinematic Approximation)

The motion-planning problem for a wheeled robot is solved in kinematic approximation. The solution is given for robots with one and two steering wheels. The results of solving the problem for a specific system are compared with the results obtained by other authors__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 2, pp. 91–102, February 2005.     

一类机器人系统的最优控制

本文通过把结构阻尼系数当作控制变量来讨论一类弹性机器人系统的最优控制问题 ,并利用Banach空间几何性质证明了最优控制元的存在唯一性     

Machine interference in automated cells

This paper presents a simulation and an analytical modeling of the machine interference problem in manufacturing cells. Each machine experiences two types of stoppage which are to be served by a robot. Several combinations of the distributions of the stoppages, service distributions, and service disciplines are studied. We determine the optimal number of machines assigned to the robot under different operating conditions such that the expected total cost of the manufacturing cell is minimized.This research is based on Mr. Norton's M.S. thesis, which was conducted at Rutgers.     

挖掘机器人视觉目标定位

为实现挖掘机器人的自动挖掘,在挖掘机实验模型基础上进行了电路改造,构建了以单片机为核心的控制电路,通过无线蓝牙与上位机进行通讯,实现对挖掘机操作装置的控制。通过视觉传感器采集挖掘机铲斗、目标物的实时图像,经图像处理后,对目标物中心及铲斗标记中心进行提取、定位,计算出二者之间的实时距离,进而控制挖掘机铲斗对目标物进行挖掘。