A simple fabrication method for tapered capillary tip and its applications in high‐speed CE and ESI‐MS

Fabrication of capillaries with tapered tips is an important technique that is required in many analytical chemistry areas, such as ESI‐MS, CE, electrochemical analysis, and microinjection. This paper describes a simple and effective grinding‐based fabrication method for capillaries with tapered tips. A novel grinding mode utilizing the combination of rotation and precession of an elastic capillary was developed, which significantly improved the controllability to the grinding process as well as the capillary tip shape. The capillary was fabricated by fixing it in an electric drill installed perpendicularly, and grind the capillary tip rotated around its own axis as well as the drill axis on sandpapers. Compared with conventional fabrication techniques for capillary tips, the present method is easy to control the capillary tip shape in routine laboratories without the requirement of expensive equipments or poisonous reagent (e.g. hydrofluoric acid (HF) solution). Various capillaries with different tip diameters and tip taper angles could be fabricated using the present method with good controllability and reproducibility. These capillaries were applied in high‐speed CE and ESI‐MS analysis to demonstrate the feasibility and potential of this fabrication method.     

An infrared small target detection algorithm based on high-speed local contrast method

Small-target detection in infrared imagery with a complex background is always an important task in remote sensing fields. It is important to improve the detection capabilities such as detection rate, false alarm rate, and speed. However, current algorithms usually improve one or two of the detection capabilities while sacrificing the other. In this letter, an Infrared (IR) small target detection algorithm with two layers inspired by Human Visual System (HVS) is proposed to balance those detection capabilities. The first layer uses high speed simplified local contrast method to select significant information. And the second layer uses machine learning classifier to separate targets from background clutters. Experimental results show the proposed algorithm pursue good performance in detection rate, false alarm rate and speed simultaneously.     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Comprehensive separation of iridoid glycosides and triterpenoid saponins from Dipsacus asper with salt‐containing solvent by high‐speed countercurrent chromatography coupled with recycling mode

The roots of Dipsacus asper Wall as a commonly used traditional Chinese medicine are used for tonifying liver and kidney and strengthening bones and muscles. However, an effective separation strategy for comprehensive and rapid separation of the main active compounds from the roots of D. asper is nonexistent. This investigation provided an effective separation method based on AB‐8 macroporous resin column chromatography using different ratios of ethanol in water and two different modes of high‐speed countercurrent chromatography with salt‐containing solvent system for rapid enrichment and separation from the roots of D. asper. The macroporous resin column chromatography was performed on AB‐8 resin using ethanol in water ratios of 10, 30, 40, 50, and 80% as the optimized enrichment conditions for iridoid glycosides and triterpenoid saponins with different polarities. For high‐speed countercurrent chromatography separation, the conventional and recycling modes were combined together to develop a strategy for 12 compounds ( 1 – 12 ) from the enriched parts of 30, 40, and 80% ethanol, including six high‐polarity iridoid glycosides ( 1 – 6 ) using inorganic salt‐containing solvent system and six triterpenoid saponins ( 7 – 12 ). Recycling high‐speed countercurrent chromatography separation was successfully applied to separate two isomers ( 9 and 10 ) after 11 cycles.     

基于光滑粒子流体动力学的滑油泵数值仿真

基于光滑粒子流体动力学方法,构建齿轮泵壳体及内部流体的粒子模型,对内啮合齿轮泵在不同工况下的流量特性进行数值模拟。首先设置了均匀分布的油泵出入口压强,计算得到的流量结果与试验结果吻合,且在中低转速下流量与转速呈线性关系;针对高转速下油泵流量降低的问题,通过适当减小周期模型内部的流体粒子数反映流量降低,获得了与试验值相吻合的连续转速流量的模拟结果;针对影响齿轮泵性能的间隙和空化现象,结合模型特点给出了相应的近似处理方法。通过以上研究,将SPH方法成功地应用于滑油泵问题的分析计算。     

抽真空获取1.8K超流氦方案分析以及真空泵抽速的预测

低温地面支持系统(CGSE)是专为AMS-02国际合作科学实验项目开发研究的低温地面支持和冷却系统,该系统要完成将AMS-02超导磁体从环境温度到1.8K的冷却过程,超流氦(HeII)的获得是其重要环节。文中针对抽真空获取HeII的方案进行了比较详细的分析和计算,同时针对此方案给出了其物理过程的T-s图、流程简图和实现该过程的主要设备。最后针对此方案,对真空泵抽速进行了预测,这将对后续阶段真空泵的选型具有指导意义。     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

Construction of a Chemical Kinetic Model of Five-Component Gasoline Surrogates under Lean Conditions

The requirements for improving the efficiency of internal combustion engines and reducing emissions have promoted the development of new combustion technologies under extreme operating conditions (e.g., lean combustion), and the ignition and combustion characteristics of fuels are increasingly becoming important. A chemical kinetic reduced mechanism consisting of 115 species and 414 elementary reactions is developed for the prediction of ignition and combustion behaviors of gasoline surrogate fuels composed of five components, namely, isooctane, n-heptane, toluene, diisobutylene, and cyclohexane (CHX). The CHX sub-mechanism is obtained by simplifying the JetSurF2.0 mechanism using direct relationship graph error propagating, rate of production analysis, and temperature sensitivity analysis and CHX is mainly consumed through ring-opening reactions, continuous dehydrogenation, and oxygenation reactions. In addition, kinetic parameter corrections were made for key reactions R14 and R391 based on the accuracy of the ignition delay time and laminar flame velocity predictions. Under a wide range of conditions, the mechanism’s ignition delay time, laminar flame speed, and the experimental and calculated results of multi-component gasoline surrogate fuel and real gasoline are compared. The proposed mechanism can accurately reproduce the combustion and oxidation of each component of the gasoline-surrogate fuel mixture and real gasoline.     

Aeroelastic analysis of cantilever plates using Peters’ aerodynamic model,and the influence of choosing beam or plate theories as the structural model

In this paper, the aeroelastic analyses of a rectangular cantilever plate of varying aspect ratio is presented. The classical plate theory has been selected as the structural model. The main point that distinguishes this study from previously reported research is employing Peters’ theory to model aerodynamic effect which is not straightforward. The Peters’ aerodynamic model was originally developed to provide lift and moment, which is only applicable to the structural model based on the beam theories. In this study, using the basic concept of the Peters’ aerodynamic model in addition to utilizing the Fourier series, the pressure distribution is derived, which makes Peters’ model applicable to structural models based on plate theory. This combination provides a much simpler state–space aeroelastic model for plates in comparison to the prevalent panel methods, which could lead to a significant reduction in computational time. In addition, the aeroelastic response of the plate with respect to changes in the structural model from the beam theory to the plate theory is evaluated. By using data from an experiment carried out at Duke University, the theoretical results are evaluated. Furthermore, the differences in structural models obtained from the plate and beam theories can be divided into two distinct parts, which are responsible for differences in bending and torsional behaviors of the structure, separately. This approach enables us to measure the effects of differences of each behavior separately, which could provide with a new insight into the problem. It has been determined that the flutter speeds obtained from the beam and plate aeroelastic models are little affected by the difference in bending behavior, but rather is mainly caused by the difference in torsional frequencies.     

高速铁路连续箱型梁桥的动力响应与减振分析

根据列车具体的轴距和轴重,建立了和谐号动车组CRH380AL型列车简化模型;对高速铁路两跨连续梁桥采用多自由度欧拉伯努利梁单元进行主梁的模拟,并将液体黏滞阻尼器模拟为有限元阻尼单元;采用Newmark直接积分方法求解了高速列车作用下的连续梁桥运动方程,数值分析了列车车速以及液体黏滞阻尼器的阻尼系数对于高速铁路连续梁桥振动响应的影响。结果表明:黏滞阻尼器对于桥梁具有明显的减振效果,阻尼力不仅与阻尼系数有关还与列车时速有关;同一黏滞阻尼器条件下,桥梁的最大加速度并不随列车速度的增加而单调增加,而是在某些特定列车车速下桥梁的最大加速度出现了峰值,且随着黏滞阻尼器的阻尼系数增大,桥梁振动响应峰值处的最大加速度减幅不同;同一列车时速的条件下,桥梁的减振效果并不是随着阻尼系数的递增呈正比递增,而是随着阻尼系数的增大,阻尼器的减振效果增幅在减小。