Core–shell nanogels by RAFT crosslinking polymerization: Synthesis and characterization

A synthetic methodology is described for the preparation of core–shell nanogels by reversible addition‐fragmentation chain transfer. Well‐defined macro chain transfer agents (macro‐CTA's) were prepared in a first step using monomers that yield sensitive polymers. In the second step, a crosslinker alone or with the addition of a functionalized comonomer were used to form a crosslinked core. The ratio of crosslinker to macro‐CTA is crucial to yield nanogels. Furthermore, the polymerization time has an impact in the architecture of the nanomaterial obtained: it evolves from a core‐crosslinked star to a core–shell nanogel. Controlling the molecular weight of the macro‐CTA and the type of comonomer in the core forming step, core–shell nanogels with hydrodynamic diameters from 22 to 168 nm and a core that represents from 35 to 77% of the size, were prepared containing functional groups in the core which could be used as catalytic scaffolds. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Tetramethylguanidinium‐polyallylamine (Tmg‐PA): A new class of nonviral vector for efficient gene transfection

Highly toxic polyallylamine (PA) was reacted with a varying amount of a novel linker, 6‐(N,N,N′,N′‐tetramethylguanidinium chloride) hexanoic acid (Tmg‐HA), to prepare a series of tetramethylguanidinium‐PA (Tmg‐PA) polymers, which were used as vectors for gene transfection. The extent of attachment of the linker, Tmg‐HA, to the PA backbone was determined by 2,4,6‐trinitrobenzene sulfonic acid assay. The modified polymers (Tmg‐PAs), when complexed with pDNA, exhibited good condensation ability. The nanoparticles, so formed, were characterized by their size and zeta potential and were subsequently evaluated for their toxicity and transfection ability on various mammalian cells, viz., HeLa, CHO, and HEK 293 cells. Mobility shift assay revealed that on increasing the percent substitution of Tmg‐HA onto PA (from Tmg‐PA1 to Tmg‐PA6), relatively higher amounts of modified polymers were required to retard the mobility of a fixed amount of DNA. Besides, Tmg‐PA polymers provided sufficient protection (ca. 84–88%) to bound DNA against nucleases and one of the formulations, Tmg‐PA2 (ca. 15% substitution) displayed the highest transfection efficiency outcompeting the commercial transfection reagent, Lipofectamine? with minimal cytotoxicity. More impressively, the transfection efficiency increased despite recording a decrease in the buffering capacity of the grafted polymers suggesting that buffering capacity is not the sole parameter in determining the gene delivery efficiency of a vector system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Surface modification of UV‐cured epoxy resins by click chemistry

A novel method for surface modification of UV‐cured epoxy network was described. Photoinitiated cationic copolymerization of a bisepoxide, namely 3,4‐epoxy cyclohexylmethyl 3,4‐epoxycyclohexanecarboxylate (EEC) with epibromohydrine (EBH) by using a cationic photoinitiator, [4‐(2‐methylpropyl)phenyl]4‐methylphenyl‐iodonium hexafluorophosphate, in propylene carbonate solution was studied. The real‐time Fourier transform infrared spectroscopic, gel content determination and thermal characterization studies revealed that both EEC and EBH monomers take part in the polymerization and epoxy network possessing bromomethyl functional groups was obtained. The bromine functions of the cured product formed on the glass surface were converted to azide functionalities with sodium azide. Independently prepared alkyne functional poly(ethylene glycol) (PEG) was subsequently anchored to azide‐modified epoxy surface by a “click” reaction. Surface modification of the network through incorporation of hydrophilic PEG chain was evidenced by contact angle measurements. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2862–2868, 2010     

Synthesis and properties of cationic polyelectrolyte with regioregular polyalkylthiophene backbone and ionic‐liquid like side groups

High‐regioregular poly{3‐[6‐(1‐methylimidazolium‐3‐yl)hexyl]thiophene‐2,5‐diyl bromide}, PMHT‐Br, has been prepared by reaction of high‐regioregular (above 92%) poly[3‐(6‐bromohexyl)thiophene‐2,5‐diyl] with 1‐methylimidazole. PMHT‐Br is soluble in water and water miscible solvents such as methanol, DMSO and shows solvatochromism; λ_max (nm): 423 (H₂O); 435 (MeOH); 452 (DMSO). Increased absorption band broadening observed for aqueous solution as well as NMR spectra in D₂O suggests a micelle‐like structure of PMHT‐Br molecules in these solutions: poly(3‐hexylthiophene) core and 1‐methylimidazolium bromide shell. Despite the disturbing effect of ionic groups, the solid‐state PMHT‐Br shows absorption maximum at 520 nm, the band edge at 660 nm (ca. 1.9 eV), and fluorescence emission with maximum at 635 nm, in a good agreement with the polymer regioregularity. Fluorescence emission maxima: λ_em (nm): 598 (H₂O); 562 (MeOH); 574 (DMSO), occur in a vicinity of corresponding adsorption band edges. Plot of electrical conductivity of PMHT‐Br (measured under the dynamic vacuum conditions, 5 × 10^?5 Pa) versus 1/T shows a break at about 70 °C same as the temperature dependence of λ_max of the solid PMHT‐Br. These breaks indicate an increase in the mobility of polymer segments and ions within PMHT‐Br; however, a thermal analysis did not provide solid evidence for it. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3073–3081, 2010     

Synthesis and applications of low‐bandgap conjugated polymers containing phenothiazine donor and various benzodiazole acceptors for polymer solar cells

A series of soluble donor‐acceptor conjugated polymers comprising of phenothiazine donor and various benzodiazole acceptors (i.e., benzothiadiazole, benzoselenodiazole, and benzoxadiazole) sandwiched between hexyl‐thiophene linkers were designed, synthesized, and used for the fabrication of polymer solar cells (PSC). The effects of the benzodiazole acceptors on the thermal, optical, electrochemical, and photovoltaic properties of these low‐bandgap (LBG) polymers were investigated. These LBG polymers possessed large molecular weight (M_n) in the range of 3.85?5.13 × 10⁴ with high thermal decomposition temperatures, which demonstrated broad absorption in the region of 300?750 nm with optical bandgaps of 1.80?1.93 eV. Both the HOMO energy level (?5.38 to ?5.47 eV) and LUMO energy level (?3.47 to ?3.60 eV) of the LBG polymers were within the desirable range of ideal energy level. Under 100 mW/cm² of AM 1.5 white‐light illumination, bulk heterojunction PSC devices containing an active layer of electron donor polymers mixed with electron acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) in different weight ratios were investigated. The best performance of the PSC device was obtained by using polymer PP6DHTBT as an electron donor and PC₇₁BM as an acceptor in the weight ratio of 1:4, and a power conversion efficiency value of 1.20%, an open‐circuit voltage (V_oc) value of 0.75 V, a short‐circuit current (J_sc) value of 4.60 mA/cm², and a fill factor (FF) value of 35.0% were achieved. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Syntheses and properties of dumbbell‐shaped POSS derivatives linked by luminescent π‐conjugated units

Dumbbell‐shaped isobutyl‐substituted 1,2‐bis(4‐vinylphenyl)acetylene‐linked POSS (DA1), 9,10‐bis(4‐vinylphenyl)ethynyl)anthracene‐linked POSS (DA2), and 5,5″‐bis((4‐vinyl)phenyl)ethynyl)‐2,2′:5′2″‐terthiophene‐linked POSS (DA3), and corresponding model compounds were synthesized by cross metathesis and Sonogashira reaction, and their film formability, and thermal and optical properties were examined. The dumbbell structures of the obtained compounds were confirmed by ¹H‐, ¹³C‐, and ²⁹Si‐NMR and MALDI‐TOF‐MS analysis. The dumbbell‐shaped POSS compounds gave optically transparent films. All the model compounds, however, formed opaque films. All the films were emissive under UV irradiation. The dumbbell structures minimize longer wavelength shifts and improve emission efficiency of the luminescent π‐conjugated linker units in their solid states compared with the model compounds. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012.     

Photoinitiated RAFT polymerization of vinyl acetate

A photoinitiation process was investigated to develop a rapid and well‐controlled RAFT polymerization method applied to vinyl acetate (VAc) using methyl (ethoxycarbonothioyl)sulfanyl acetate (MESA) and bis(2,4,6‐trimethylbenzoyl)phenylphosphine oxide as the RAFT agent and photoinitiator, respectively. MESA was selected as the photochemically inert RAFT agent to minimize photolysis of the thiocarbonylthio groups during polymerization. Poly(vinyl acetate) with a prespecified well‐controlled molecular weight (MW) and a narrow MW distribution was successfully synthesized. The polymerization reaction proceeded as a living polymerization and was remarkably rapid compared with approaches that use thermally initiated processes with a very short induction period. A detailed kinetic study of the mechanism underlying the polymerization reaction, however, revealed that the chain ends containing xanthate moieties were not perfectly stable upon UV‐irradiation, and they generated radicals via homolytic cleavage. This reaction appeared to proceed by a combination of a degenerative transfer RAFT mechanism and a dissociation‐combination mechanism. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

RAFT‐mediated batch emulsion polymerization of styrene using poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate as both surfactant and macro‐RAFT agent

Poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] trithiocarbonate, which contains the reactive trithiocarbonate group and the appending surface‐active groups, is used as both surfactant and macromolecular reversible addition‐fragmentation chain transfer (macro‐RAFT) agent in batch emulsion polymerization of styrene. Under the conditions at high monomer content of ～20 wt % and with the molecular weight of the macro‐RAFT agent ranging from 4.0 to 15.0 kg/mol, well‐controlled batch emulsion RAFT polymerization initiated by the hydrophilic 2‐2′‐azobis(2‐methylpropionamidine) dihydrochloride is achieved. The polymerization leads to formation of nano‐sized colloids of the poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride]‐b‐ polystyrene‐b‐poly[N‐(4‐vinylbenzyl)‐N,N‐dibutylamine hydrochloride] triblock copolymer. The colloids generally have core‐shell structure, in which the hydrophilic block forms the shell and the hydrophobic block forms the core. The molecular weight of the triblock copolymer linearly increases with increase in the monomer conversion, and the values are well‐consistent with the theoretical ones. The molecular weight polydispersity index of the triblock copolymer is below 1.2 at most cases of polymerization. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012