不同光滑度立方体氧化铁对液晶电光性能的改善

向列相液晶被广泛应用于液晶显示中,但是由于杂质的存在,会导致液晶的驱动电压变大,增加能耗。 为了降低阈值电压和饱和电压,通常向液晶中添加纳米颗粒来提高电光性能。 本文利用水热法制备了表面粗糙和光滑的两种立方体Fe₂O₃纳米颗粒,其形貌均匀,尺寸约550 nm。 将二者分别掺杂到向列相液晶E7中,结果表明,粗糙立方体Fe₂O₃/E7复合体系具有比光滑立方体Fe₂O₃/E7复合体系和向列相液晶E7更优的电光性能,且在掺杂质量分数为0.4%时,其电光性能达到最优,阈值电压和饱和电压分别降低9.9%和11.6%,对比度增大80%,响应时间降低至6.0 ms。 这归因于粗糙立方体Fe₂O₃具有足够的表面积和表面所带电荷更多,所以会更易吸附体系中的杂质离子和减弱杂质离子的屏蔽作用,从而提高了电光性能。     

Adsorption of the Ternary Liquid Mixture Ethanol/n-Octane/n-Hexadecane onto Activated Carbon: I. The Adsorption Excess of the Ternary Mixture and of Its Binary Combinations

The adsorption isotherms of the binary mixtures of ethanol/n-Octane, ethanol/n-hexadecane and n-octane/n-hexadecane onto the activated carbon TA 95 were measured at 278 K, 288 K, 298 K and 308 K and described with mathematical functions. About 300 experimental values of the adsorption excess of the ternary mixture ethanol/n-octane/n-hexadecane onto activated carbon TA 95 at 298 K were measured by gas chromatography inside the ternary triangle. The ternary miscibility gap was determined at three temperatures. A good representation of the ternary data and the calculated activity coefficients (using the UNIFAC model) in three-dimensional space was possible with the help of transformation of coordinates. It was possible, too, by utilization of the conception of the quasi two-component representation of the mole fractions with and without miscibility gap. Several influencing factors on ternary adsorption isotherms were discussed for the system ethanol/n-octane/n-hexadecane/TA 95.     

Determination of phenolic compounds in water samples by on-line solid-phase extraction—supercritical-fluid chromatography with diode-array detection

Summary The eleven Environmental Protection Agency (EPA) priority phenolic compounds have been determined by solid-phase extraction (SPE) coupled on-line to supercritical-fluid chromatography (SFC) with diodearray detection. The variables affecting chromatographic separation were optimized and the analytes were separated at 40 °C in two diol columns connected in series; a gradient of methanol, as modifier, and CO₂ was used as mobile phase. Under these conditions, all the compounds studied were separated to baseline in less than 13 min. PLRP-S and LiChrolut EN were tested as sorbents in a 10×3 mm i.d. laboratory-packed precolumn for solid-phase extraction. An ion-pair reagent, tetrabutylammonium bromide (TBA), was used in the extraction process to increase break-through volumes. The performance of the method was checked with tap and river waters and the pre-concentration of 20 mL of sample in a PLRP-S pre-column enabled phenolic compounds to be determined at low μg L⁻¹ levels with limits of detection ranging between 0.4 and 2 μg L⁻¹. The repeatability and reproducibility between days (n=3) for real samples spiked at 10 μg L⁻¹ were lower than 10%.     

Online photocatalytic device for highly selective pre-column fluorescence derivatization of 5-hydroxyindoles with benzylamine

A fluorimetric liquid chromatographic method for the determination of 5-hydroxyindoles based on the benzylamine derivatization process mediated through an online photocatalytic oxidation has been developed. In this study, we used a photocatalytic column comprising tefzel tubing packed with TiO₂-coated glass beads, as a pre-column derivatization reactor. The fluorescence derivatization of 5-hydroxyindoles using benzylamine proceeded during their passage through the reaction column under near-UV irradiation. The 5-hydroxyindole derivatives were separated continuously on a reversed-phase liquid chromatography within 50 min, using 100 mM acetate buffer (pH 4.6)-acetonitrile (72:28, v/v; isocratic elution) containing 3 mM sodium octanesulfonate; the samples were detected fluorimetrically at 465 nm upon excitation at 350 nm. The detection limits (signal-to-noise ratio = 3) of the 5-hydroxyindoles were in the range from 160 to 360 fmol per 5 μL injection. We have applied this method, which requires minimal sample pre-treatment, to the determination of 5-hydroxyindole-3-acetic acid in human urine.     

(Vapor + liquid) equilibria of the binary mixtures of m-cresol with C1-C4 aliphatic alcohols at 95.5 kPa

Bubble point temperatures at 95.5 kPa, over the entire composition range, are measured for the binary mixtures formed by m-cresol with: methanol, ethanol, 1-propanol, 2-propanol, and n-, iso-, sec-, and tert-butanols - using a Swietoslawski-type ebulliometer. The liquid phase composition - bubble point temperature measurements are well represented by the Wilson model. (Vapor + liquid) equilibria predicted from the model are presented.     

Simplified Solid-Phase Extraction Procedure and Liquid Chromatographic Determination of Celecoxib in Rat Serum

A simplified solid phase extraction method, eliminating a preliminary protein precipitation has been developed for the determination of celecoxib in rat plasma. The technique included a solid phase extraction of the serum samples on a [poly (divinylbenzene-co-N-vinylpyrrolidone)] sorbent. After conditioning, the cartridge was loaded with 0.5 mL of acidified serum containing internal standard. Elution was made with 1 mL of a mixture of acetonitrile and methanol (1/1, v/v). After evaporation of the eluate to dryness and reconstitution with methanol, the samples were analyzed on an octadecyl bonded phase with several mobile phases containing acetonitrile and a phosphate buffer. Detection was carried out using a Photodiode Array Detector. Full validation of the proposed method was provided (linearity range: 0.01–2 mg. L^–1, average extraction efficiency: 92.4%; average intra-day variability: 4.6% with an accuracy of 94.8%; average interday variability: 5% with an accuracy of 95.3%, limit of detection: 0.005 mg. L^–1, limit of quantification: 0.002 mg. L^–1). The proposed method was successfully utilised to quantify celecoxib in rat plasma for a pharmacokinetic study.Revised: 26 January and 23 April 2004     

超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查染发剂中32种染料成分

建立了超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查和分析染发剂中32种禁限用染料的分析方法。样品经甲醇-2 g/L抗坏血酸水溶液溶解提取,正己烷净化,用ZORBAX Eclipse Plus C_(18)(3.0 mm×100 mm,1.8μm)色谱柱分离,以甲醇-5 mmol/L乙酸铵水溶液为流动相进行梯度洗脱,采用正、负离子切换同时测定了32种染料成分,显著提高了检测通量。以全扫描模式下提取的保留时间和一级母离子精确质量数以及同位素丰度比,实现对染发剂中多种染料成分的快速筛查;以自动触发采集的二级碎片离子精确质量数进行确证。32种染料在相应的质量浓度范围内线性关系良好,相关系数(r~2)均大于0.99;定量下限(LOQ)为0.2～40μg/g,回收率为81.0%～110%,相对标准偏差(RSD)为3.3%～9.9%。该方法简单、准确、快速,适用于染发剂中多种禁限用染料成分的高通量快速定性筛查和定量分析。     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

离子液体相转移催化环己醇氧化制备环己酮

以不同种类的离子液体作为相转移催化剂,用双氧水作为氧化剂,Na2WO4·2H2O为催化剂,在适当的反应条件下,能有效进行相转移催化环己醇氧化制备环己酮.实验结果表明,采用酸性离子液体[C16mim]HSO4和[C14mim]HSO4相转移催化合成环己酮,可提高环己酮的产率,具有反应条件温和、操作简便、需用时间短、相转移催化剂可以循环使用等优点.在反应温度为90℃,反应时间为50min条件下,环己醇的转化率高达100%,选择性99%以上.     

Determination of Aldehydes and Ketones in Fuel Ethanol by High-Performance Liquid Chromatography with Electrochemical Detection

A new methodology was developed for analysis of aldehydes and ketones in fuel ethanol by high-performance liquid chromatography (HPLC) coupled to electrochemical detection. The electrochemical oxidation of 5-hydroxymethylfurfural, 2-furfuraldehyde, butyraldehyde, acetone and methyl ethyl ketone derivatized with 2,4-dinitrophenylhydrazine (DNPH) at glassy carbon electrode present a well defined wave at +0.94 V; +0.99 V; +1.29 V; +1.15 V and +1.18 V, respectively which are the basis for its determination on electrochemical detector. The carbonyl compounds derivatized were separated by a reverse-phase column under isocratic conditions with a mobile phase containing a binary mixture of methanol / LiClO_4(aq) at a concentration of 1.0 × 10⁻³ mol L⁻¹ (80:20 v/v) and a flow-rate of 1.1mL min⁻¹ . The optimum potential for the electrochemical detection of aldehydes-DNPH and ketones-DNPH was +1.0 V vs. Ag/AgCl. The analytical curve of aldehydes-DNPH and ketones-DNPH presented linearity over the range 5.0 to 400.0 ng mL⁻¹, with detection limits of 1.7 to 2.0 ng mL⁻¹ and quantification limits from 5.0 to 6.2 ng mL⁻¹, using injection volume of 20 μL. The proposed methodology was simple, low time-consuming (15 min/analysis) and presented analytical recovery higher than 95%.