Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

Effects of steric and hydrophobic forces on the rheological properties of ZrO2 suspensions

 The effect of pH on the flow behavior of ZrO₂ suspensions containing polyacrylic and octanoic acids was evaluated. In the flocculated pH regime, the flow behavior is highly shearthinning and can be described by a power-law model. The shear-thinning behavior increases with increasing degree of flocculation. Maximum shearthinning was observed at the zero zeta potential condition. Hydrophobic interaction arising from adsorbed octanoic acid was found to enhance the shear-thinning behavior. No such enhancement was observed for adsorbed polyacrylic acid. It was also illustrated that the viscosity–pH behavior is a mirror image of the yield stress–pH behavior. A quantitative particle-pair interactions model incorporating steric and hydrophobic interactions was proposed to explain the effects of polyacrylic and octanoic acids on the maximum yield stress. Received: 23 May 1997 Accepted: 4 June 1997     

肿瘤患者化疗后骨髓抑制的护理探讨

通过对113例化疗后骨髓抑制患者采用保护性隔离，皮肤、口腔、上呼吸道、泌尿道护理及饮食、心理等综合性护理措施的观察，发现113例化疗后骨髓抑制患者，经过综合护理措施仅13例出现感染、发热，2例经抗生素治疗无效，死于感染性休克，其余患者的血象均恢复正常，康复出院。所以本护理措施，对促进化疗后骨髓抑制患者的康复有一定的应用价值。     

Development of an HPLC method with electrochemical detection of femtomoles of 8-oxo-7,8-dihydroguanine and 8-oxo-7,8-dihydro-2'-deoxyguanosine in the presence of uric acid

A selective method based on high performance liquid chromatography with electrochemical detection (HPLC-ECD) was developed to enable simultaneous detection of 8-oxo-7,8-dihydroguanine (8-oxoGua) and 8-oxo-7,8-dihydro-2′-deoxyguanosine (8-oxodGuo), products of DNA oxidative damage, in the presence of uric acid (UA), a strong interferent in their electrochemical detection. The method developed consists of HPLC isocratic elution with amperometric detection on a glassy carbon electrode, enabling a detection limit for 8-oxoGua and 8-oxodGuo lower than 1 nM in standard mixtures. Detection of low concentrations up to 25 nM of 8-oxoGua and 8-oxodGuo in the presence of UA in a 10⁴-fold higher concentration was achieved after one-step solid phase extraction (SPE). The method was tested with urine samples and it was possible to detect and quantify the presence of 8-oxoGua, and to confirm that UA was eliminated after uricase degradation and SPE. The LOD found in urine samples was about 80 nM, a value higher than in standard mixtures, due to the increase of background current in the urine matrix. The results presented here contribute to the development of a methodological approach to simultaneous determination of 8-oxoGua and 8-oxodGuo in urine samples.     

Effect of molecular orientation distribution and crystallinity on the measurement of the crystal lattice modulus of nylon 6 by x-ray diffraction

The crystal lattice modulus of nylon 6 (-type) was measured by x-ray diffraction using nylon 6 films drawn up to five times. The measured crystal lattice modulus was 173–175 GPa for all specimens whose crystallinity and the Young's modulus were beyond 46% and 3.75 GPa, respectively. These results indicate that a state of homogenous stress can be achieved. In contrast, the values were scattered for the speciments whose crystallinity and Young's modulus are less than the above values. To study the origin, a numerical calculation of the crystal lattice modulus, as measured by x-ray diffraction, was carried out by considering effects on the orientation factors of molecular chains and crystallinity. In this calculation, a previously introduced model was employed, in which oriented crystalline layers are surrounded by oriented amorphous phases so that the strains of the two phases at the boundary are identical. The theoretical results calculated by the introduced model indicated that the crystal lattice modulus by x-ray diffraction is almost equal to the intrinsic crystal modulus if the morphology of the test specimen can be represented as a series model. In contrast, if a parallel model is more appropriate, the difference between the measured modulus and the intrinsic value can be pronounced. Such morphological dependence was found to be less pronounced with increasing high degree of molecular orientation and crystallinity.     

低温低内应力化学镀镍工艺的研究

化学镀广泛应用于非金属的电镀、电铸前的施加导电层。化学镀沉积层质量与其在零件上的附着力有着密切的关系 ,重视对化学镀沉积层内应力的研究 ,开发一个低温、低内应力的化学镀镍工艺 ,对于化学镀沉积层的推广应用有着十分重要的意义。本文采用正交实验方法对低温、低内应力化学镀镍工艺进行了系统研究 ,开发出了一个低温、低内应力的化学镀镍工艺。在实验过程中发现沉积层内应力同其在零件上的结合力具有密切关系并对其进行了初步探讨。1　实验方法1 1　正交实验根据探索性实验结果分析 ,影响化学镀镍层内应力σ和沉积层速率ｒ的主要因…     

Determination of Total Reduced Thiol Levels in Plasma Using a Bromide Substituted Quinone

The exploitation of 2‐bromo‐1,4‐naphthoquinone (NQBr) as a selective redox label for the determination of reduced thiol functionalities (RSH) has been investigated. The system is selective for RSH functionality, giving distinct voltammetric signals for glutathione and cysteine but can also be adapted for broad spectrum thiol detection. Ion chromatographic protocols based on conductimetric detection enable total RSH analysis (protein and monomolecular moieties) within human plasma. Bromide released through the reaction can be easily quantified and integrated within normal IC measurements. The efficacy of the approach has been assessed and the response validated through comparison with the standard colorimetric technique.     

Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems

The Cox-Merz empirical relationship between the linear (oscillatory) and nonlinear (steady-state) viscosities has been shown to be valid for many polymeric systems. Here, we present an equivalent expression to relate the linear (G) and nonlinear (N ₁) elastic properties of viscoelastic systems. Like the Cox-Merz relationship, it uses a combination of elastic and viscous parameters. The modified form of the storage modulus is then equivalent to the Cox-Merz complex viscosity. It can be used to correlate with (half) the normal force at numerically equal circular frequency and shear rate, respectively.This new expression and the Cox-Merz rule are tested for a range of polymeric and colloidal systems. It is found that both expression work for the polymeric systems considered, but fail for the colloidal systems. In the latter, the steady state values of viscosity and elasticity are consistently low, and replacing them by the complex viscosity and our new elastic expression only makes matters worse.For polymer systems, we suggest this is a general but not universal observation, since we are aware of exceptions to the rule that polymeric systems obey the Cox-Merz rule for viscosity and our rule for elasticity. For colloidal systems we find that neither rule is obeyed for any of our systems.     

Quantitative evaluation of stress distribution in bulk polymer samples through the comparison of mechanical behaviors between giant single‐crystal and semicrystalline samples of poly(trans‐1,4‐diethyl muconate)

The Raman shift and crystallite modulus were measured under the application of tensile force for a giant single crystal and a series of uniaxially oriented semicrystalline samples of poly(trans‐1,4‐diethyl muconate) (polyEMU). The apparent Raman shift factor α^app or a vibrational frequency shift per 1 GPa tensile stress was higher for the semicrystalline samples with lower crystallinity or lower bulk modulus. The apparent crystallite modulus E or Young's modulus along the chain axis in the crystalline region was not constant but varied remarkably between the giant single crystal and semicrystalline samples. A systematic change in α^app and E among the polyEMU samples with different preparation history could be interpreted quantitatively on the basis of a mechanical series parallel model consisting of crystalline and amorphous phases. The origin of different E and α^app was speculated to be a stress concentration on the taut‐tie chain contained as a parallel crystalline component in the mechanical model. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 444–453, 2003