微波消解-电感耦合等离子体发射光谱(ICP-OES)法测生物质中的碱金属和碱土金属

为研究并解决测试生物质样品中碱金属和碱土金属含量的干扰,采用微波消解-电感耦合等离子体发射光谱(ICP-OES)法对生物质中的碱金属和碱土金属钾、钙、钠、镁元素进行测定,考察了样品消解后不同的酸体系,共存元素干扰对钾、钠、钙、镁含量测定的干扰研究。经过研究表明,接近分析标准曲线酸浓度的样品干扰小,铅、铟、钛、锰元素对钠元素测定造成干扰,砷、铜、镉对钙元素测定干扰,铝对钾元素测定有干扰,镁测定不受共存元素干扰影响,运用干扰系数法可以减少共存元素对测定元素的误差。各待测元素标准曲线相关系数大于0.9996,检出限为0.0014~0.023 mg/L,玉米芯各元素的相对标准偏差为0.98%~1.9%,加标回收率为80.2%~106%;西瓜皮的各元素相对标准偏差为0.91%~2.3%,加标回收率为85.3%~106%。方法用于测定国家标准物质GBW07603,各元素结果均在标准值参考范围内。方法用于测定生物质中碱金属和碱土金属的结果,用t检验法与离子色谱测定值进行比对,结果无显著性差异。     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384     

茉莉醛相转移催化合成法的改良

茉莉醛又称2-戊基肉桂醛,具有优雅的茉莉花香,是一种深受调香师喜爱的合成香料。目前已广泛应用于各种日用化学品中。     

Characterization of the Effects of Vanadium Traps in Cracking Catalysts by Imaging Secondary Ion Mass Spectrometry and Microactivity Test

The vanadium trapping effect of Mg and La containing additives in cracking catalyst contaminated with 2300 ppm Ni and 4700 ppm V has been analyzed by microactivity test (MAT) and imaging secondary ion mass spectrometry (SIMS). The results of SIMS imaging are consistent with cracking activity data and show that the La/spinel is a superior vanadium trap for the fluid catalytic cracking of hydrocarbons (FCC) operation. La/spinel serves as a dual function additive for both vanadium trap and SO_x removal. The optimum amount of La/spinel added to the cracking catalyst is about 15% by weight. This results in an increased catalytic activity, an increase in gasoline yield, and a decrease in coke and gas factors. The MgAl₂O₄ phase of Mg/Al₂O₃ additive is found capable of trapping vanadium while its MgO of Mg/Al₂O₃ phase can migrate to zeolite particles (the active component of the FCC catalyst) that, in turn, causes a decline in the activity of that catalyst.     

正交试验结合响应面法优化诃子多糖提取工艺

采用正交试验结合响应面法优化诃子多糖的提取工艺,以诃子多糖的提取率为指标,以固液比、提取温度、提取时间和提取次数为因素,正交试验初步筛选工艺参数,响应面法做进一步优化.结果表明,多糖提取的最佳工艺条件为固液比1∶28,提取温度69℃,提取时间1h,提取次数3次,各项指标相对误差均小于2%,应用响应面法可减少诃子多糖提取时间.     

基于新型量子点荧光微球的氯霉素免疫层析试纸条的制备和应用

以羧基化CdTe/ZnSe量子点荧光微球为标记物,通过1-乙基-(3-二甲基氨基丙基)碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)活化法将氯霉素(CAP)单克隆抗体与量子点荧光微球偶联制备荧光探针.氯霉素全抗原(CAP-HS-BSA)及羊抗鼠二抗分别喷涂硝酸纤维素膜,形成检测线(T线)和质控线(C线),组装成新型氯霉素量子点荧光微球免疫层析试纸条,建立了快速、定量检测牛奶中CAP的方法.本研究开发的量子点荧光微球试纸条可在15 min内完成牛奶样品中CAP的定量检测,线性范围为0.1~100.0μg/L,检出限为0.1μg/L.牛奶样品CAP的加标回收率为93.3%~97.9%,相对标准偏差在4.9%~6.9%之间.     

Evaluation of hybrid laser-cut and cast miniature fracture specimens

This paper presents a new hybrid laser-cutting method for producing fracture test specimens from thermosetting materials. The hybrid approach combines casting of a sheet of material with subsequent laser-cutting of the test specimens. The new approach was compared to the traditional casting method using a fracture toughness test. For this study, a compact version of the tapered double cantilever beam (cTDCB) was used as a specimen geometry for both manufacturing methods. The cTDCB specimen is crack length independent, and crack length investigations were performed to ensure the crack length independence of the cTDCB specimens. The specimens that were made by the hybrid laser-cut method were found to be comparable to the specimens obtained by the traditional casting method. Moreover, the laser-cut method provides a fast and accurate method to make a significant number of samples in a reasonable time. These tests show that the hybrid laser-cut method could be a good alternative to the traditional casting method.     

Experimental characterization of dynamic behaviour of gelatin-based material using DIC

In this paper, the dynamic response of gelatin-based soft material under impact loading is investigated. The dynamic tests are principally performed by the classical SHPB (Split Hopkinson Pressure Bars) technique. However, due to the very low mechanical impedance of the specimen compared with the Hopkinson bars, the feeble impact forces are measured by highly sensitive piezoelectric polyvinylidene fluoride (PVDF) pressure sensors instead of SHPB measurement system. The PVDF pressure sensors are placed on the interfaces between the specimen and the bars. During the impact test, the non-equilibrium stress state and inhomogeneous strain fields are developed in the specimen; a digital image correlation (DIC) technique is proposed to identify the inhomogeneous displacement fields using high speed photography. A non-parametric approach based on the DIC technique is developed to deduce the transient stress fields in the longitudinal and transverse directions from the displacement fields measured by DIC. The validation of the calculated stress fields is performed by comparing them with the stress measurements from the PVDF pressure sensor at the bottom end of the specimen. Furthermore, stress-strain response is carried out using this approach throughout the specimen. It is clearly shown that the average highest strain rate varies with position in the specimen. This lead to multiple stress-strain relations determined at different strain rates by only one impact test. The significant strain rate sensitivity is observed at the tested rate range from 81/s to 269/s. Under compression loading, the axial stress state is developed as a simple compression only in the central part of the specimen due to the friction at the interfaces between the specimen and the bars. According to the calculated results based on movement of “long waves”, the region of the simple compression stress state in the central part of the specimen is localized. It is observed that the axial stress is much more important than the transverse stress in the central part and this confirms the assumption of uni-axial compression stress state in the specimen.     

基于学科能力视角的江苏高考化学试题研究

以化学学科能力模型为依据,确定化学学科能力评价指标,并以此为基础,对2008-2020年江苏高考化学试题学科能力要求进行分析,得出江苏卷对于化学学科能力的考查特点及变化趋势,并提出了相关教学建议.