Determination of paraquat in human blood plasma using reversed-phase ion-pair high-performance liquid chromatography with direct sample injection

This report describes the determination of paraquat (PQ) in human blood plasma samples by a direct-injection reversed-phase ion-pair chromatographic method. Blood plasma filtrate was injected directly into the LiChrospher® RP-18 alkyl-diol silica (ADS) precolumn integrated in a column switching system using a mixture of 3% 2-propanol and 10 mM sodium octane sulfonate (SOS) in a 0.05 M phosphate buffer (pH 2.8). After washing with this phase, the ADS precolumn was back-flushed with the analytical mobile phase consisting of 40% of methanol and 10 mM SOS in a 0.05 M phosphate buffer (pH 2.8) at a flow rate of 1.0 ml min⁻¹, in order to carry the analyte to a conventional reversed-phase analytical column, where the separation of PQ was achieved and finally detected by UV at 258 nm. The recoveries of PQ from human blood plasma samples ranged between 95.0 and 99.5% at nine different concentrations (from 0.05 to 3.00 μg of PQ ml⁻¹) with coefficients of variation <2.5% (n=3). The precision expressed as relative standard deviation was below 3.5% for between-day and below 4.3% for within-day measurements (n=5). The detection limit (signal-to-noise ratio, S/N>3) was 0.005 μg ml⁻¹ with an injection volume of 200 μl. The proposed method is promising for the identification and quantification of PQ at low concentration levels and is suitable for its analysis in human blood plasma samples from intentional or accidental poisonings cases with a sample throughput of 5 samples per hour.     

Remote substituent effect favoring the formation of syn-adducts in the chelation controlled radical reactions of γ-benzyloxy-α-methylenecarboxylic acid esters

The chelation controlled radical reactions of ethyl γ-benzyloxy-α-methylenecarboxylates bearing a bulky γ-substituent, such as CHMe₂, CHPh₂, c-C₆H₁₁ and CH(Ph)OTBDMS, with alkyl iodides gave the syn-adducts with high diastereoselectivities. However, the diastereoselectivity for the substrates bearing a γ-substituent CH(i-Pr)OTBDMS depended critically on the configuration of the substituent; the substrate bearing the OTBDMS group anti to the γ-benzyloxy group showed poor diastereoselectivity, but its diastereomer gave syn-adduct exclusively. The high syn-selectivitiy is referred to the H-atom transfer to the outside face of radical center in the sharply folded seven-membered chelate intermediate bearing the ethoxy group with Z-geometry. The corner flapping of the radical center atom of the global minimum energy conformer generates a local minimum conformer and the H-atom transfer to the outside face of the radical center of the newly formed structure gives the anti-adduct. The poor diastereoselectivity is due to the very small energy difference between the two conformers and consequently both the syn- and anti-adducts are yielded in nearly equal amounts.     

14N遥测核四极共振中的偏离共振效应

本文对遥测NQR谱中的偏离共振效应作了较详细地研究,发现¹⁴N谱线的强度随偏离共振效应而变化。当偏离共振强度与射频场强度接近时,测得的谱线强度最大。该效应可用来增强¹⁴N遥测NQR谱仪的灵敏度。上述实验现象在理论上采用脉冲的激发带宽方法作了解释和讨论。     

Microporous hypercrosslinked polystyrene Styrosorb as a restricted access packing in sample clean-up for high performance liquid chromatography. Part I: Evaluation of restricted access properties

Summary Styrosorb is a beaded microporous polystyrene with particle sizes between 2 and 4 m. In spite of hypercrosslinkage the material was seen to swell in organic solvents. The native material is functionalized with Tris-groups at the outer surface of the particles. The average pore diameter was determined as 1.45±0.3 nm from size exclusion data using polystyrene and polyethylene standards in THF. The reversed phase behavior of the restricted access phase Styrosorb was investigated by injection of two test mixtures. Mixture I contained five aromatic amines, mixture II consisted of Amperozide^R and four related compounds. The optimum range of mobile phase composition was assessed so that analytes were separated whilst any proteins present were eluted unretained. Due to the small particle size short columns of 29×4 mm can be used for both sample clean-up and analytical separation of Amperozide^R and its metabolite.     

Quantitative Comparison Between Vacuum-Ultraviolet Irradiation and Remote Hydrogen Plasma Treatment of Hydrocarbon Polymers

The photon flux of vacuum ultraviolet (VUV) and ultraviolet (UV) radiation of a hydrogen plasma with and without a MgF₂window was recorded by fluorescence measurements of sodium salicylate layers. After the compensation of the MgF₂absorption by increasing the input power into the plasma source, a comparison between afterglow hydrogen plasma and VUV treatments was made. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were treated either with VUV radiation or with remote hydrogen plasma and mass loss and CH absorption loss were measured by a quartz crystal microbalance and by infrared reflection absorption spectroscopy, respectively. In the case of PE the effects of both treatments were found to be very similar white for PP slight differences were observed. For the actual set of experimental conditions, the radiation component is largely responsible for the efficiency of the plasma treatment. VUV and remote hydrogen plasma treatments of PS showed only a negligible loss of mass and CH absorption.     

Analysis of grid file algorithms

Grid file algorithms were suggested in [12] to provide multi-key access to records in a dynamically growing file. We specify here two algorithms and derive the average sizes of the corresponding directories. We provide an asymptotic analysis. The growth of the indexes appears to be non-linear for uniform distributions:O(v ^c ) orO(v ), wherec=1+b^–1, =1+(s-1)/(sb+1),s is the number of attributes being used,v the file size, andb the page capacity of the system. Finally we give corresponding results for biased distributions and compare transient phases.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.     

甾醇边链的化学修饰

本文对近年来甾醇边链结构改造的新方法和新动向--Barton 的Gif系统氧化反应及Breslow的远程功能化反应进行了综述。     

Microstructure and ferroelectric properties of r.f. magnetron sputtering derived PZT thin films deposited on interlayer (PbO/TiO2)

Lead zirconate titanate (PZT) thin films were deposited on Pt/Ti/SiO₂/Si and interlayer/Pt/Ti/SiO₂/Si substrate by radio frequency (r.f.) magnetron sputtering with a Pb_1.1Zr_0.53Ti_0.47O₃ target. The crystallization of the PZT thin films was formed only by substrate temperature. When interlayer (PbO/TiO₂) was inserted between the PZT thin film and the Pt electrode, the grain growth and processing temperature of the PZT thin films were considerably improved. Compared to PZT/Pt structure, the dielectric constant and polarization properties of the PZT/interlayer/Pt structure were fairly improved. In particular, PZT/interlayer/Pt at the substrate temperature of 400 °C showed prevalent ferroelectric properties (_r=475.97, tanδ=0.0591, P_r=23 μC/cm²). As a result of an X-ray photoelectron spectroscopy (XPS) depth-profile analysis, it was found that PZT/interlayer/Pt deposited only by substrate temperature without the post-annealing process via r.f. magnetron sputtering method remained independent of each other regardless of substrate temperatures.     

Generation and reactions of novel oxiranyl ‘Remote’ anions

Deprotonation of an oxiranyl β-proton takes place in a stereoselective manner providing the corresponding oxiranyl ‘remote’ anion. The anion is stabilized by chelation between the lithium and the carbonyl moiety of an ester, lactone, imide, or keto-group in the form of a five-membered cyclic intermediate. Certain ester-stabilized oxiranyl anions are stable and can be left in THF solution at −78°C for several hours. The generated anions undergo a stereoselective alkylation reaction to provide products, which could be useful intermediates in the synthesis of bioactive naturally occurring α-methylene bis-γ-butyrolactones.