Numerical validation of the shear compression specimen. Part I: Quasi-static large strain testing

The shear compression specimen (SCS), which is used for large strain testing, is thoroughly investigated numerically using three-dimensional elastoplastic finite element simulations. In this first part of the study we address quasi-static loading. A bi-linear material model is assumed. We investigate the effect of geometrical parameters, such as gage height and root radius, on the stress and strain distribution and concentration. The analyses show that the stresses and strains are reasonably uniform on a typical gage mid-section, and their average values reflect accurately the prescribed material model. We derive accurate correlations between the averaged von Mises stress and strain and the applied experimental load and displacement. These relations depend on the specimen geometry and the material properties. Numerical results are compared to experimental data, and an excellent agreement is observed. This study confirms the potential of the SCS for large strain testing of material.     

左手介质中电磁波的传播速度

在同向介质中,电磁波的群速度一般是能量传播的方向,并且电磁波的相速度和群速度在大部分情况下都满足瑞利关系.为了研究左手介质的电磁特性,本文从理论上导出了左手介质中电磁波的相速度、群速度及其关系,得出左手介质中电磁波的群速度为负,并介绍了左手介质的一些应用前景.     

Proof of an Asymptotic Property of Self-Similar Solutions of the Boltzmann Equation for Granular Materials

We consider a question related to the kinetic theory of granular materials. The model of hard spheres with inelastic collisions is replaced by a Maxwell model, characterized by a collision frequency independent of the relative speed of colliding particles. Our main result is that, in the space-homogeneous case, a self-similar asymptotics holds, as conjectured by Ernst–Brito. The proof holds for any initial distribution function with a finite moment of some order greater than two.     

Synthesis,p-Nitrophenolate Complexation and Competitive Anion Signaling of Novel Calixpyrrole Dimer

A novel dimeric calixpyrrole has been synthesized. The dimer forms stable complexes with p-nitrophenolate ion with a concomitant reduction in extinction coefficient. The chromogenic anion is displaced by the addition of various anions like fluoride and acetate. Effective optical sensing of these anions is accomplished using the calixpyrrole dimer.     

Structure comparison between Th2Zn17-type and TbCu7-type Sm–Fe intermetallic compounds and their nitrides by means of 57Fe-Mössbauer spectroscopy

Samarium–iron intermetallic compounds were prepared by a melt spinning method with low and high wheel speeds, which resulted in a Th₂Zn₁₇-type and a TbCu₇-type structure, respectively. Structure comparison between these types was investigated for Sm–Fe intermetallic compounds and their nitrides by ⁵⁷Fe-Mössbauer spectroscopy.     

纳米金属颗粒膜的二次谐波增强效应

纳米尺寸金属颗粒膜可以产生较大的表面二次谐波增强。本文测量了用溅射法制备的钠米尺寸Ａｕ颗粒的反射二次谐波，其增强因子可达１０２数量级，理论计算了局域场因子与波长的关系曲线。对于用Ｎｄ：ＹＡＧ激光器输出的１．０６μｍ波长的基频光，可以获得较强的倍频光的局域场增强，对金属颗粒尺寸对局域场因子的影响进行了计算和分析。     

Sound field of a baffled sound source covered by an anisotropic rigid-porous material

A theoretical approach for the sound field of a piston sound source covered by a finite thickness layer of anisotropic rigid-porous material is presented. The formulation is an extension of the method worked out by Amedin et al. [Sound field of a baffled piston source covered by a porous medium layer. J Acoust Soc Am 1995;98(3):1757]. First, in the present study the sound field of a point source is described by cylindrical waves. Then, with the proper boundary conditions, the sound pressure radiated from a piston source covered by a layer of anisotropic porous material can be calculated. The effects of frequency and bulk density of material on the sound propagation in an anisotropic porous material are studied. Finally, the effect of anisotropy is discussed.     

红外光谱仪在红外电磁波吸收材料研究中的应用

以Lambere-Beer定律为基础．根据傅里叶变换红外光谱仪的特点，提出了红外电磁波吸收材料吸波性能的测试方法，并对非晶态SiO2粉末材料的红外电磁波吸收特性进行了讨论．实验结果表明。该方法简便、快速、可操作性强．     

红柱石材料领域的应用及其研究新进展

本文对目前红柱石材料的基本性质、资源分布状况、红柱石的选矿工艺以及开发应用状况做了介绍,并重点阐述了红柱石材料领域的研究新进展和趋势,特别是红柱石用做矿物材料的研究现状,以及开发利用的前景.     

Solving material nonlinear structural problems by a finite analytic method in local coordinates

The purpose of this paper is to develop a finite analytic (FA) numerical solution for the elasto-plastic problem of the total theory. Schemes for the FA method in local coordinates for solving non-linear governing equations in the form of Navier equations are derived, which can be utilized to solve the problem in a domain of arbitrary geometry. Numerical illustration shows that the schemes are effective and practical.