原位漫反射红外光谱研究氮氧化物在Ag-ZSM-5催化剂上的吸附态及选择性催化还原反应机理

利用原位分析方法对催化剂表面吸附态进行动态表征，对了解催化反应机理具有重要的意义。漫反射红外光谱是一种理想的原位方法，应用该方法在298－773K范围原位考察了以丙烯为还原剂，NO在Ag-ZSM-5催化剂上的吸附态及选择性催化还原过程。认为NO的选择性催化还原符合直接作用机理，还原的关键是形成有机－氮氧化物（R－NO2或R－ONO）中间体。O2的作用是使C3H6充分活化，并是有效产生有机－氮氧化物不可缺少的条件。     

Spectrophotometric Determination of Traces of Boron in High Purity Silicon

Abstract

A reddish brown complex is formed between boron and curcumin in concentrated sulphuric acid and glacial acetic acid mixture (1:1). the coloured complex is highly selective and stable for about 3 hours and has the maximum absorbance at 545 nm. the sensitivity of the method is extremely high and the detection limit is 3 parts per billion based on 0.004 absorbance value. the interference of some of the important cations and anions relevant to silicon were studied and it is found that 100 fold excess of most of these cations and anions do not interfere in the determination of boron. the method is successfully employed for the determination of boron in silicon used in semiconductor devices. the results have been verified by standard addition method.     

Electroless deposition of Sno2 and antimony doped SnO2 films

Thin polycrystalline films of SnO₂ and antimony doped SnO₂ have been prepared by simple economic electroless deposition technique. The transmittance in the visible range and the reflectance in the i.r. range for SnO₂ films are ～80% and ～70%, respectively, with resistivity ～10^?2 Ω cm. On the other hand, antimony doped SnO₂ films have transmittance in the visible range and reflectance in the i.r. range, as good as ～86% and ～83%, respectively, with resistivity as low as ～10^?3Ω cm. By vacuum annealing, the resistivity of both types of films has been brought down as low as ～10^?3 and ～10^?4 Ω cm, respectively.     

Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization

In recent years, poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers have become prominent in high strength applications such as body armor, ropes and cables, and recreational equipment. The objectives of this study were to expose woven PBO body armor panels to elevated temperature and moisture, and to analyze the chemical, morphological and mechanical changes in PBO yarns extracted from the panels. A 30% decrease in yarn tensile strength, which was correlated to changes in the infrared peak absorbance of key functional groups in the PBO structure, was observed during the 26 week elevated temperature/elevated moisture aging period. Substantial changes in chemical structure were observed via infrared spectroscopy, as well as changes in polymer morphology using microscopy and neutron scattering. When the panels were removed to an ultra-dry environment for storage for 47 weeks, no further decreases in tensile strength degradation were observed. In a follow-on study, fibers were sealed in argon-filled glass tubes and exposed to elevated temperature; less than a 4% decrease in tensile strength was observed after 30 weeks, demonstrating that moisture is a key factor in the degradation of these fibers.     

多组分金属催化剂表面漫反射紫外可见光谱研究

研究了二氧化碳加氢甲烷化二组分、三组分担载型金属催化剂表面漫反射紫外可见光谱（ＤＲＵＶＳ）。根据ＤＲＵＶＳ提供的信息,揭示了催化剂组分间相互作用结果对催化活性的影响;不同助剂量催化剂ＤＲＵＶＳ特征强度与催化活性间定量关系也得到合理确定 。     

Femtosecond Diffuse-Reflectance Spectroscopy of Various Commercially Available TiO2 Powders

The transient absorption properties of several commercially available TiO₂ photocatalysts were investigated by femtosecond diffuse-reflectance spectroscopy. Using femtosecond diffuse-reflectance spectroscopy, the quantities and rates of the initial trapping processes of holes and electrons generated by the photoexcitation of TiO₂ photocatalysts were investigated. It was found that the total amounts of trapped electrons for the pure-anatase and pure-rutile TiO₂ became smaller with increasing particle size, but increased again when the particles’ diameters were larger than 50 nm. The anatase–rutile mixed TiO₂ photocatalysts were found to have smaller amounts of trapped electrons compared with pure-anatase and pure-rutile TiO₂ photocatalysts. The lifetimes of trapped holes of various TiO₂ photocatalysts were also investigated, and it was found that the lifetimes were proportional to the anatase–rutile mixed ratios.     

分布布喇格反射镜的反射特性

采用等效法布里珀罗(FP)腔方法对分布布喇格反射镜(DBR)的特性进行了研究,计算并讨论了上下两层DBR结构非对称模型反射率的变化.设计了DBR反射镜的反射谱中心波长为850nm的结构.随着DBR周期数的增加,腔反射率峰值逐渐增加.上下两层DBR反射镜的厚度由反射率和中心波长决定.实验表明,下DBR的周期数为30对左右,上DBR的周期数为20对左右,易实现激光输出.非对称的双层DBR的反射特性表明理论计算与实验结果基本一致.     

Spectroscopic study of BixEu1−xVO4 and BiyGd1−yVO4 mixed oxides

The mixed oxides Bi_xEu_1−xVO₄ and Bi_yGd_1−yVO₄ crystallize in a zircon-type structure, for 0 <x < 0.6 and 0 < y < 0.64, and in a fergusonite-type structure, for 0.94 < x < 1 and 0.93 < y < 1. A process of competition between the dominant and the constrained effects of the lone-pair 6s² of Bi³⁺ is discussed. The diffuse reflectance spectroscopic studies of these mixed oxides are presented. The observed broad bands are attributed to charge transfer processes and the sharp peaks in the Bi_xEu_1−xVO₄ spectra are ascribed to intra-configurational 4f – 4ftransitions of the Eu³⁺ ion. The broad absorption shift in BiLnVO₄ (Ln : Eu and Gd) compounds to the longer wavelengths range, when Bi is introduced in the LnVO₄ lattice, is ascribed to charge transfer processes in a Bi-VO₄ center and are interpreted assuming a Jahn-Teller effect in the excited state of Bi³⁺. The concept of an internal pressure of Bi³⁺ ions is also used to explain the broad A-band shifts.     

不同处理工艺对珍珠的紫外可见漫反射光谱的共性影响研究

主要基于紫外可见（UV-Vis）漫反射光谱首次对比研究了经过热处理、有机或无机染料改色或钴-60产生的γ射线辐照三种不同处理工艺对同为珍珠质的淡水与海水珍珠及贝壳珍珠层的漫反射光谱的影响机制。结果表明：（1）在不同颜色、淡海水属性的珍珠与贝壳珍珠层的UV-Vis反射光谱的紫外区皆存在约280 nm 处的吸收峰,上述吸收峰位归属于珍珠层中自身存在的有机质所致,而非珍珠的致色色素。（2）以上三种不同的处理工艺对上述280 nm处的吸收峰位存在一致的影响行为,即随着不同的处理工艺强度的增大,处理样品对应的反射谱图中约280 nm处吸收峰的强度逐渐降低直至消失。与此同时,珍珠的反射谱图中紫外区的反射主波长的反射强度也随之减弱,且反射主波长的峰位向可见光区发生显著红移。研究工作可为珍珠及珍珠的优化处理的鉴定筛选及其珍珠颜色的形成属性判定提供检测依据与理论支撑。     

The influence of various dielectric parameters on the reststrahlen region of SiC

The reststrahlen region of SiC is analysed with the goal of establishing the origin of different shapes of this band, by varying the dielectric parameters involved when simulating the reststrahlen region as obtained by infrared reflectance.