纳米银/二维石墨相氮化碳/还原氧化石墨烯复合材料的制备及其光催化降解抗生素

为优化石墨相氮化碳(g-C₃N₄)光催化剂的结构,改善其对污染物的降解性能,本文以三聚氰胺为前驱体,通过高温煅烧和热氧化剥离制备了二维石墨相氮化碳(2D-C₃N₄),并用光还原法一步合成纳米银/二维石墨相氮化碳/还原氧化石墨烯(Ag/2D-C₃N₄/rGO)复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)、X射线光电子能谱(XPS)、氮气吸附脱附等温曲线(BET)等对材料进行表征。 以头孢曲松钠为目标污染物,探究pH值、催化剂用量、头孢曲松钠初始浓度等因素对催化剂的吸附、降解性能的影响,并探究降解反应机理。 当pH=6.0,催化剂用量为0.3 g/L,头孢曲松钠初始浓度为10.0 mg/L时,复合材料对头孢曲松钠的降解率可达到89.1%。 催化剂的稳定性较强,具有实际应用价值,可用于处理含头孢类抗生素的废水。     

部分还原二氧化钛的NMR和EPR研究

Partially reduced TiO₂ nanomaterials have attracted significant interest because of their visible-light activity for catalysis and photodegradation. Herein, we prepared a partially reduced anatase TiO₂ (Re-A-TiO₂) nanoparticle material using a fast combustion method, demonstrating good activity toward decomposing methyl orange under visible light irradiation. The surface structure of the prepared material, after being surface-selectively ¹⁷O-labeled with H₂¹⁷O (¹⁷O-enriched water), was studied via ¹⁷O and ¹H solid-state magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy, and the obtained results were compared to those of non-reduced anatase TiO₂ (A-TiO₂). The EPR results showed that the concentrations of paramagnetic species (i.e., oxygen vacancies (OV) and Ti³⁺) in Re-A-TiO₂ were much higher than that in A-TiO₂, while the former was associated with a higher OV/Ti³⁺ ratio. The intensities of the EPR signals were significantly affected by the adsorbed water, and this phenomenon was explored in combination with ¹H NMR spectroscopy. The ¹H species on Re-A-TiO₂ appeared at larger chemical shifts, denoting the increased acidity of the sample, and these ¹H species on Re-A-TiO₂ were more difficult to remove than those on A-TiO₂. On the other hand, different features were observed for the signals arising from the two-coordinated oxygen atoms (μ₂-O) in ¹⁷O NMR, suggesting a typical anatase TiO₂(101) surface on A-TiO₂, but a more complex surface environment for Re-A-TiO₂. Furthermore, a larger amount of hydroxyl groups (OH) were observed on Re-A-TiO₂ compared to that on A-TiO₂, indicating a larger proportion of exposed (001) facets on Re-A-TiO₂. However, the μ₂-O signals broadened and became similar when the drying temperature was increased to 100 ℃, indicating a non-faceted anatase TiO₂ surface in such conditions. Based on the EPR and NMR results, a significant fraction of the OH species is believed to be formed from the reaction of the paramagnetic centers and adsorbed water molecules. The ¹H→¹⁷O cross polarization (CP) MAS and two-dimensional heteronuclear correlation (2D HETCOR) NMR spectra were used to verify the spatial proximity of the hydrogen and oxygen species, confirming the spectral assignments of a strongly adsorbed water and one type of surface OH species. In particular, the ¹H NMR signals at approximately 11 ppm were ascribed to the hydrogen species in the intramolecular hydrogen bond. In summary, this study investigated the paramagnetic species and surface structure of anatase TiO₂ materials by combining EPR along with ¹H and ¹⁷O solid-state NMR spectroscopy. The differences in the surface structures of Re-A-TiO₂ and A-TiO₂ should be closely related to their different properties toward the photodegradation of methyl orange.     

Automatic kinetic model generation and selection based on concentration versus time curves

The goal of the paper is to automatize the construction and parameterization of kinetic reaction mechanisms that can describe a set of experimentally measured concentration versus time curves. Using the framework and theorems of formal reaction kinetics, first, we build a set of possible mechanisms with a given number of measured and unmeasured (real or fictitious) species and reaction steps that fulfill some chemically reasonable requirements. Then we fit all the corresponding mass-action kinetic models and offer the best one to the chemist to help explain the underlying chemical phenomenon or to use it for predictions. We demonstrate the use of the method via two simple examples: on an artificial, simulated set of data and on a small real-life data set. The method can also be used to do a kind of lumping to generate a model that can reproduce the simulation results of a detailed mechanism with less species and thereby can largely accelerate spatially inhomogeneous simulations.     

基于特征正交分解的一类瞬态非线性热传导问题的新型快速分析方法

提出了一种基于特征正交分解(POD)和有限元法的瞬态非线性热传导问题的模型降阶快速分析方法, 建立了导热系数随温度变化的一类瞬态非线性热传导问题有限元格式的POD降阶模型. 在隐式时间推进方法的基础上有效结合单元预转换方法和多级线性化方法发展了一种加速求解瞬态非线性热传导降阶模型的新型计算方法,并通过二维和三维算例验证了该方法的准确性和高效性. 研究结果表明: (1)降阶模型解的均方根误差在经过初始时段轻微的脉动后稳定于0.01%以下, 而其计算效率比有限元全阶模型提高2$\sim $3个数量级, 并且自由度数量(DOFs)愈大提高的幅度也愈加显著; (2)新型算法解决了常规算法在计算非线性降阶模型时加速性能差的问题, 即使是在DOFs比较小的时候也能够明显提高计算效率; (3)常数边界条件下得到的POD模态可以用来建立相同求解域在各种复杂时变边界条件下的瞬态非线性热传导降阶模型, 并对其传热过程和温度场进行快速准确的分析与预测, 具有很好的工程应用价值.      

A sensitive amperometric sensor for hydrazine based on Pt nanoparticles-reduced graphene oxide–multi-walled carbon nanotubes composite

The platinum nanoparticles-reduced graphene oxide-multi-walled carbon nanotubes composite (PtNPs-rGO-MWCNTs) has been synthesised by one-step chemical co-reduction strategy in ethylene glycol (EG) system using sodium citrate as reducing agent. The X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), as well as the electrochemical methods have been used for the characterisation of this composite. Benefiting from the large effective surface and good carrier function of rGO-MWCNTs, PtNPs in this nanocomposite have some excellent characteristics such as small particle size, good dispersion, as well as high electrocatalytic activity. Based on this, a new electrochemical sensor for hydrazine has been fabricated using dropping method. Under the optimum conditions, the linear range for the determination of hydrazine by amperometry at 0.20 V (vs. SCE) in phosphate buffer (pH 7.0) is from 2.0 × 10^?7 mol L^?1 to 2.3 × 10^?3 mol L^?1. The detection limit and sensitivity is 4.5 × 10^?8 mol L^?1 (S/N = 3) and 219.7 μA mM^?1, respectively. This sensor has some attractive analytical features such as low detection limit, wide linear range, high sensitivity, as well as good stability.     

ZnS@C/rGO复合材料的制备及其电化学可逆储锂性能

通过溶剂热反应-水热处理的途径,制备了无定形碳包覆的ZnS纳米晶体(ZnS@C)与还原氧化石墨烯(rGO)复合的ZnS@C/rGO复合材料,并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)对复合材料进行了形貌和微观结构的表征。电化学测试结果表明,与ZnS@C和ZnS/rGO相比,所制备的ZnS@C/rGO复合材料显示了显著增强的电化学储锂性能,在100 mA·g^-1电流密度下,其电化学储锂的首次可逆比容量为1 101 mAh·g^-1,充放电循环100次后其可逆比容量为1 569 mAh·g^-1。在不同电流密度下循环1 200次后,仍保持在2.0 A·g^-1电流密度下有1 096 mAh·g^-1的可逆比容量,显示了其稳定的长循环性能。     

基于中空多孔金纳米/石墨烯复合纳米材料的葡萄糖氧化酶直接电化学及其生物传感研究

采用溶液相牺牲模板法制备中空多孔金纳米粒子（HPAuNPs）,并将该材料与还原氧化石墨烯（rGO）复合,用于葡萄糖氧化酶（GOx）在玻碳电极（GCE）表面的有效固定,构建GOx/HPAuNPs/rGO/GCE传感界面。利用扫描和透射电镜、X射线光电子能谱、X射线衍射谱、红外光谱及电化学等方法对材料的形貌与结构,GOx的固定化过程,以及传感器的直接电化学和电催化性能进行表征。结果表明,HPAuNPs和rGO的协同作用能有效促进GOx与电极之间的直接电子转移（DET）。基于GOx/HPAuNPs/rGO/GCE对葡萄糖的良好电催化性能,该方法有效实现了对葡萄糖的高灵敏度检测,其电流响应的线性范围为0.05～7.0 mmol/L,检出限（S/N=3）为16μmol/L。该传感器具有良好的选择性、重现性及稳定性,对实际样品血清中血糖的测定结果令人满意,回收率为98.0%～103%,相对标准偏差不大于5.0%。     

纳米金-还原氧化石墨烯修饰葡萄糖氧化酶传感器的制备及其电流法检测饮料中的葡萄糖

利用纳米金(Au NPs)与还原氧化石墨烯(rGO)复合纳米材料制备了葡萄糖氧化酶生物传感器并用于饮料中葡萄糖含量的检测。将壳聚糖作为还原剂及稳定剂,通过一步法合成了Au NPs-rGO复合材料,并通过物理吸附固定葡萄糖氧化酶(GOx)来制作GOx生物传感器。该传感器在磷酸盐缓冲溶液(0.1 mol/L,p H6.0)中,-0.45 V(vs.Ag/Ag Cl)电位下电流法检测葡萄糖含量,线性检测范围为0.01~0.88 mmol/L,灵敏度为22.54μA·mmol-1·L·cm-2,检出限为1.01μmol/L,且表观米氏常数为0.497 mmol/L。该传感器用于多种饮料中葡萄糖含量的直接检测,结果满意。     

Molecularly engineered graphene surfaces for sensing applications: A review

Graphene is scientifically and commercially important because of its unique molecular structure which is monoatomic in thickness, rigorously two-dimensional and highly conjugated. Consequently, graphene exhibits exceptional electrical, optical, thermal and mechanical properties. Herein, we critically discuss the surface modification of graphene, the specific advantages that graphene-based materials can provide over other materials in sensor research and their related chemical and electrochemical properties. Furthermore, we describe the latest developments in the use of these materials for sensing technology, including chemical sensors and biosensors and their applications in security, environmental safety and diseases detection and diagnosis.     

Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.