Electric field assisted oxygen removal from the basal plane of the graphitic material

We provide a novel strategy to eliminate the epoxy group from the basal plane of graphene platelets. Given that the current reduction methods are unsatisfactory to clean the epoxides or sometimes cause undesirable structure deformations, the proposed strategy restores the original hexagonal carbon network without creating other new defects. To the best of our knowledge, the electric field mediated graphene oxide (GO) reduction has not yet been systematically investigated. The capability would permit the improvement of existing GO reduction methods and assist in the fabrication of high‐quality graphitic materials. © 2012 Wiley Periodicals, Inc.     

Evaluation of RBFs for volume data interpolation in CFD

A greedy method for choosing an optimum reduced set of control points is integrated with RBF interpolation and evaluated for the purpose of interpolating large‐volume data sets in CFD. Given a function defined at a set of points, the greedy method selects a small subset of these points that is sufficient to keep the interpolation error at all the remaining points below a chosen bound. This is equivalent to a type of data compression and would have useful storage, post‐processing, and computational applications in CFD. To test the method in terms of both the point selection scheme and the suitability of reduced control point volume interpolation, a trial application of the interpolation to velocity fields in CFD volume meshes is considered. To optimise the point selection process, and attempt to be able to capture multiple length scales, a variable support radius formulation has also been included. Structured and unstructured mesh cases are considered for aerofoils, a wing case and a wing‐body case. For smooth volume functions, the method is shown to work well, producing accurate velocity interpolations using a very small number of the cells in the mesh. For general complex fields including large gradients, the method is still shown to be effective, although large gradients require more interpolation points to be used.Copyright © 2013 John Wiley & Sons, Ltd.     

Temperature Dependence of the Surface Tension of Alkali Metals: A Unified Correlation

Abstract

In this work, new definitions of the normalized temperature and surface tension are proposed which result in a single plot for the surface tension of molten alkali metals. The functional dependence of the reduced surface tension on the reduced temperature can be adequately described by a straight line; the intercept and slope have been obtained using the linear regression approach. The method proposed herein predicts the values of surface tension at various temperatures with an average error of about 5%.     

Spectral representation of reduced protein models

We consider a spectrum-like two-dimensional graphical representation of proteins based on a reduced protein model in which 20 amino acids are grouped into five classes. This particular grouping of amino acids was suggested by Riddle and co-workers in 1997. The graphical representation is based on depicting sequentially the amino acids on five horizontal lines at equal separations. One-letter codes, B, O, U, X and Y, to which numerical values 1 to 5 have been assigned, are suggested as labels for the fictional amino acids that represent all the amino acids within each group. The approach is illustrated on ND6 proteins of eight species having from 168 to 175 amino acids. While visual inspection of the novel spectral graphical representations of proteins may reveal local similarities and dissimilarities of protein sequences, arithmetic manipulations of spectra offer an elegant route to graphic visualization of the degree of similarity for selected pairs of proteins.     

Fluorinated and Trifluoromethylated Corannulenes

The syntheses and properties of corannulenes carrying electron‐withdrawing groups (F, CF₃, C₆F₅) are reported. Direct fluorination of corannulene (C₂₀H₁₀) was carried out with xenon difluoride, and the crystal structure of the product was confirmed by the X‐ray analysis. Novel trifluoromethylated corannulenes, including the versatile 4,9‐dibromo‐1,2‐bis(trifluoromethyl)corannulene, were obtained by various established ring‐closing reactions. Besides the use of hexafluorobutyne for the construction of fluoranthenes by Diels–Alder reaction as precursor molecules to form 1,2‐disubstituted corannulenes, bis(pentafluorophenyl)acetylene was employed as dienophile. The molecular structure and crystal packing of a trifluoromethylated corannulene was determined by single‐crystal X‐ray analysis and compared with those known brominated and trifluoromethylated corannulenes. The general electron‐acceptor properties of corannulenes bearing substituents introduced in particular positions by liquid‐phase synthesis are discussed together with published computational results.     

三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

噻虫胺分子印迹电化学传感器的制备与应用EI北大核心CSCD

以噻虫胺为模板分子,通过恒电位沉积壳聚糖,在还原氧化石墨烯(RGO)修饰的玻碳电极表面制备了可特异性识别噻虫胺的分子印迹传感器。采用交流阻抗法(EIS)、差分脉冲伏安法(DPV)和循环伏安法(CV)对传感器的电化学性能进行表征,优化了电沉积时间、洗脱圈数、孵化时间及溶液pH等实验条件。在优化条件下,以K_(3)[Fe(CN)_(6)]作为电活性探针,DPV峰电流强度与噻虫胺浓度在1.0~1000 nmol/L范围内呈良好的线性关系,检出限0.46 nmol/L。将本方法应用于实际样品中噻虫胺的含量测定,加标回收率为97.6%~103.2%。     

Disposable Electrochemical Sensor for Food Colorants Detection by Reduced Graphene Oxide and Methionine Film Modified Screen Printed Carbon Electrode

A facile synthesis of reduced graphene oxide (rGO) and methionine film modified screen printed carbon electrode (rGO-methionine/SPCE) was proposed as a disposable sensor for determination of food colorants including amaranth, tartrazine, sunset yellow, and carminic acid. The fabrication process can be achieved in only 2 steps including drop-casting of rGO and electropolymerization of poly(L-methionine) film on SPCE. Surface morphology of modified electrode was studied by scanning electron microscopy (SEM). This work showed a successfully developed novel disposable sensor for detection of all 4 dyes as food colorants. The electrochemical behavior of all 4 food colorants were investigated on modified electrodes. The rGO-methionine/SPCE significantly enhanced catalytic activity of all 4 dyes. The pH value and accumulation time were optimized to obtain optimal condition of each colorant. Differential pulse voltammetry (DPV) was used for determination, and two linear detection ranges were observed for each dye. Linear detection ranges were found from 1 to 10 and 10 to 100 µM for amaranth, 1 to 10 and 10 to 85 µM for tartrazine, 1 to 10 and 10 to 50 µM for sunset yellow, and 1 to 20 and 20 to 60 µM for carminic acid. The limit of detection (LOD) was calculated at 57, 41, 48, and 36 nM for amaranth, tartrazine, sunset yellow, and carminic acid, respectively. In addition, the modified sensor also demonstrated high tolerance to interference substances, good repeatability, and high performance for real sample analysis.     

Bound to continuum intersubband transition optical properties in the strain reducing layer-assisted InAs quantum dot structure

In this paper, the impact of wetting layer, strain reducing layer and dot height on the electronic, linear and nonlinear optical properties of bound to continuum states transitions are investigated in a system of InAs truncated conical shaped quantum dot covered with the In_xGa_1−x As strain reducing layer. The electronic structure, containing two main states of S and wetting layer states (WL), was calculated by solving one electronic band Hamiltonian with effective-mass approximation. The results reveal that the presence of the strain reducing layer in the structure extends the quantum dot emission to longer wavelength which is reported as a red-shift of the photoluminescence (PL) peak in the experimental measurement. This study also highlights the possibility of improving the intersubband optical properties based on the significant size-dependence of the three layer dot matrix by employing the strain reducing and wetting layers. According to this simulation, relatively tall dots on the thick wetting layer introduce the optimized structure size for practical applications to meet the SRL assisted enhanced dot structure.     

Revelation of ESIPT mechanism for the novel fluorescent system HNIBT in toluene and methanol solvents: A TDDFT study

In this work, we devote to explore excited‐state intramolecular proton transfer (ESIPT) behavior for a novel fluorescent molecule naphthalimide‐based 2‐(2‐hydroxyphenyl)‐benzothiazole (HNIBT) [New J. Chem. 2019, 43, 9152.] in toluene and methanol (MeOH) solvents. Exploring weak interactions, stable HNIBT‐enol, and HNIBT‐MeOH‐enol complex can be found in S₀ state via TDDFT/B3LYP/6‐311+G(d,p) level. Given photoexcitation, intramolecular hydrogen bond O1? H2···N3 of HNIBT‐enol and HNIBT‐MeOH‐enol is dramatically enhanced, which offers impetus for facilitates ESIPT reaction. After repeated comparisons, we verify the unavailability of intermolecular hydrogen bonding effects between HNIBT‐enol and MeOH molecules. In view of excitation, HOMO (π) → LUMO (π*) transition and the changes of electronical densities indeed impulse ESIPT tendency. Via constructing potential energy curves (PECs), for both HNIBT‐enol and HNIBT‐MeOH‐enol complex, the ESIPT could only occur along with intramolecular hydrogen bond O1? H2···N3. Through comparison, the potential barrier falls from 4.124 kcal/mol (HNIBT‐enol) to 2.132 kcal/mol (HNIBT‐MeOH‐enol). Therefore, we confirm that the ESIPT of the HNIBT system happens more easily in the MeOH solvent compared with the toluene solvent.