Mössbauer study on LiFePO4 cathode material for lithium ion batteries

Crystalline LiFePO₄ has been synthesized using solid-state, spray pyrolysis, and wet chemical methods. The crystal parameters were obtained from Rietveld’s refinement methods of the X-ray diffraction patterns. A detailed investigation of the Fe valency carried out using Mössbauer spectroscopy at room temperature indicates that Fe is predominantly present in its bivalent state.     

贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

Effect of BaBiO3 and Ba0.6K0.4BiO3 additives on the rechargeability of manganese oxide cathodes in alkaline cells

The effect of the incorporation of small amounts (1–5 wt%) of semiconducting BaBiO₃ and metallic Ba_0.6K_0.4BiO₃ additives on the rechargeability of electrolytic manganese dioxide (EMD) cathodes in alkaline cells in the one-electron regime has been investigated. Both the BaBiO₃ and Ba_0.6K_0.4BiO₃ additives lead to better cyclability compared to the previously known binary oxide additive Bi₂O₃. X-ray diffraction patterns recorded before and after 30 cycles as well as cyclic voltammograms recorded after first and 30 cycles reveal that the better cyclability in the presence of BaBiO₃ and Ba_0.6K_0.4BiO₃ additives is due to the suppression of the formation of unwanted, electrochemically inactive birnessite and hausmannite phases and a shifting of the second-electron capacity of Mn to higher potentials.     

LiCoO_2 electrode/electrolyte interface of Li-ion batteries investigated by electrochemical impedance spectroscopy

The storage behavior and the first delithiation of LiCoO2 electrode in 1 mol/L LiPF6-EC:DMC:DEC elec- trolyte were investigated by electrochemical impedance spectroscopy (EIS). It has found that, along with the increase of storage time, the thickness of SEI film increases, and some organic carbonate lithium compounds are formed due to spontaneous reactions occurring between the LiCoO2 electrode and the electrolyte. When electrode potential is changed from 3.8 to 3.95 V, the reversible breakdown of the resistive SEI film occurs, which is attributed to the reversible dissolution of the SEI film component. With the increase of electrode potential, the thickness of SEI film increases rapidly above 4.2 V, due to overcharge reactions. The inductive loop observed in impedance spectra of the LiCoO2 electrode in Li/LiCoO2 cells is attributed to the formation of a Li1-xCoO2/LiCoO2 concentration cell. Moreover, it has been demonstrated that the lithium-ion insertion-deinsertion in LiCoO2 hosts can be well described by both Langmuir and Frumkin insertion isotherms, and the symmetry factor of charge transfer has been evaluated at 0.5.     

Electrochemical reaction of lithium with nanosized vanadium antimonate

Nanometric vanadium antimonate, VSbO₄, was prepared by mechanical milling from Sb₂O₃ and V₂O₅ and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbaüer spectroscopy (MS) and X-ray photoelectron spectroscopy (XPS) techniques. Its reactivity towards lithium was examined by testing Li/VSbO₄ cells under galvanostatic and potentiostatic regimes. The amount of Li inserted was found to be consistent with a two-step process involving the reactions (i) VSbO₄+8 Li→Sb+V+4 Li₂O and (ii) Sb+3 Li→Li₃Sb, the former being virtually irreversible and the latter reversible as suggested by the shape of the anodic and cathodic curves. Ex situ XPS measurements of the discharged and charged electrode provided direct evidence of the formation of alloyed Sb and confirmed the results of the potentiostatic curves regarding the irreversible or reversible character of the previous reactions. The Li/VSbO₄ cell exhibited acceptable electrochemical performance, which surpassed that of other Sb-based compounds as the likely result of the formation of V and its associated enhanced electrode conductivity.     

Structure and Electrochemical Behavior of Lithium-Manganese Spinels Doped with Chromium and Nickel

A series of compounds with the general formula LiMn_{2 - x - y} Cr _x Ni _y O₄, where x + y = 0.05, 0.5, or 1.0, is synthesized. It is shown that all these compounds are pure-phase spinels with parameter aequal to 0.8193-0.8236 nm. Doping a stoichiometric lithium-manganese spinel simultaneously with chromium and nickel makes the spinel structure stable. The initial specific capacity of a spinel depends on its doping degree. Doping LiMn₂O₄ with chromium and nickel simultaneously at an Mn : Cr : Ni ratio of 195 : 3 : 2 raises the spinel's specific capacity and reduces the cycling degradation. The change in the discharge capacity of LiMn_1.95Cr_0.03Ni_0.02O₄ electrodes cycled at 20, 0, and -14°C is determined.     

Electrochemical properties and synthesis of LiAl0.05Mn1.95O3.95F0.05 by a solution-based gel method for lithium secondary battery

The cathode materials, LiMn₂O₄, LiAl_0.05Mn_1.95O₄ and LiAl_0.05Mn_1.95O_3.95F_0.05 were firstly prepared by a simple solution-based gel method using the mixture of acetate and ethanol as the chelating agent. The synthesized samples were investigated by X-ray diffraction, scanning electronic microscope and differential and thermal analysis. The as-prepared powders were used as positive materials for lithium-ion battery, whose discharge capacity and cycle voltammogram properties were examined. The results revealed that LiAl_0.05Mn_1.95O_3.95F_0.05 synthesized by the solution-based gel method had higher initial capacity than LiAl_0.05Mn_1.95O₄ and better capacity retention rate (92%) than that of LiAl_0.05Mn_1.95O₄ and LiMn₂O₄, which revealed that Al and F dual-doped LiMn₂O₄ could gain better electrochemical properties of LiMn₂O₄ than only the Al-doped LiMn₂O₄.     

稀土掺杂对锂离子电池正极材料LiMn2O4结构及电性能的影响

利用微波加热技术合成稀土掺杂基锂离子电池正极材料LiMn2-xRExO4(RE=Y，Nd，Gd，Ce)，通过XRD、循环伏安及恒电漉充放电测试研究了稀土掺杂离子对合成正极材料结构及电化学性能的影响。XRD测试结果表明，合适的掺杂量可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用，稀土离子的引入可以部分取代原有的三价锰离子，由于稀土离子的离子半径较三价锰离子大，因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大，在一定程度上扩充了锂离子迁移的三维通道，更有利于锂离子的嵌入与脱嵌；循环伏安及恒电漉充放电测试结果表明稀土掺杂有效提高了LiMn2O4材料的电化学循环可逆性及循环稳定性。     

Comparison between potentiostatic and galvanostatic intermittent titration techniques for determination of chemical diffusion coefficients in ion-insertion electrodes

Using well-cycled, thin composite graphite electrodes we analyze carefully the limitations of potentiostatic and galvanostatic intermittent titration techniques (PITT and GITT, respectively) for determination of the differential (incremental) intercalation capacitance, C_dif, and the chemical diffusion coefficient, D, of Li ions in these ion-insertion electrodes (IIEs). We demonstrate the superiority of the GITT over PITT to determine these quantities as the former technique allows for a more accurate determination of C_dif and hence D which closely approach to the spinodal domain related to the first-order phase transition during ion-insertion. We show that GITT is also more effective in eliminating the parasitic contributions of background currents to the total measured response. A pronounced difference in the initial, intrinsic kinetics of formation of a new phase in the bulk of the old one has been observed depending on the direction of titration (phases less saturated with Li are formed faster during deintercalation than the Li-rich phases in the course of intercalation).