有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

水煤气变换反应的微观动力学分析──Cu基催化剂上H_2S中毒失活原因的 Monte Carlo 模拟研究

用ＢＯＣＭＰ方法及ＭｏｎｔｅＣａｒｌｏ模拟技术，对Ｈ２Ｓ导致Ｃｕ基催化剂失活的原因进行了计算分析。研究结果表明，当原料气中存在Ｈ２Ｓ时，ＷＧＳ反应的活化能明显高于无Ｈ２Ｓ时的活化能，随着表面Ｈ２Ｓ浓度的增大（θ＝０，０．１０，０．２５），反应的活化能也逐渐变大（其大小比为１∶１．３４∶３．３），究其原因可归结为Ｈ２Ｓ的存在使得反应物分子的吸附热减小，从而使Ｈ２Ｏ的解离吸附（ＷＧＳ反应的速控步骤）活化能增大。     

动力学荧光增敏法测定痕量钒(Ⅴ)

研究了在稀硫酸介质中柠檬酸存在下,钒(Ⅴ)催化溴酸钾氧化吖啶红的荧光增强作用,建立了催化荧光法测定痕量钒(Ⅴ)的新方法。该方法的线性范围为0.20～3.00μg/L,检出限为0.04μg/L。本法已用于水样、大米和花生仁中痕量钒的测定。     

Covalent Structures of Phosphorus: A Comprehensive Theoretical Study

Starting from earlier work by Baudler we introduce a chemical heuristic for the systematic deduction and classification of covalent partial structures of phosphorus in polycyclic phosphanes, phosphorus-rich polycyclic phosphides, and allotropes of phosphorus except the black forms. This approach is used to direct ab initio techniques (which also confirm the rules) in the quest for as yet unknown forms of molecular or macromolecular phosphorus. Based on calculated stabilities of systematically generated structural alternatives we rationalize the stabilities of Hittorf's phosphorus and of molecular P₄, confirm the possible existence of at least one other crystalline allotropic form of phosphorus, and provide insight into the probable structure of amorphous red phosphorus. In total, the combined approach of chemical heuristics and large scale ab initio calculations presented in this work supplies a coherent chemical understanding of covalent polyphosphorus structures.     

取代基效应与乙烯-α-烯烃共聚物的序列结构——5.乙烯-乙烯醇共聚物

本文应用取代基效应(SCS)方法研究了乙烯-乙烯醇(EVA)共聚物,得到了羟基(-OH)在两种不同溶剂中的SCS参数:在苯酚+重水(80/20W/W)中参数为S_1=42.77±0.08ppm,S_2=7.155±0.06ppm,S_3(s)=-4.08±0.02ppm,S_3(t)=-3.09±0.02ppm,S_4=0.48±0.03ppm,S_5=0.26±0.05ppm,在以邻二氯苯为溶剂时参数为S_1=44.97±0.61ppm,S_2=7.40±0.00ppm,S_3(s)=-4.51±0.17ppm,S_3(t)=-3.13±0.00ppm,S_4=0.63±0.04ppm,S_5=0.36±0.00ppm,同时利用所得到的SCS参数对该共聚物的~(13)C NMR谱进行了归属。     

四苯基卟啉铂电致发光性能的研究

四苯基卟啉铂(PtTPP)可以作为红光掺杂材料制备有机电致发光器件，采用的器件结构为[ITO／CuPc／NPB／BePP2：PtTPP／LiF／Al]，其中BePP2：PtTPP的共沉积膜作为发射层．实验结果表明在发射层中存在着从BePP2到PtTPP的能量传递．通过改变掺杂层中PtTPP的浓度来考察器件的性能，当PtTPP的掺杂浓度在8％(物质的量比)时，器件呈现纯正的红光发射，发射峰位于668nm，器件的效率为0．004lm／W．     

离子性指数、极化效应指数烷烃^13C NMR化学位移的 关系研究

定义了烷烃分子中碳原子的离子性指数(INI)，用离子性指数(INI)、极化效应指数(PEI)及N^i~H(i=αβΥ)结构信息参数研究了烷烃的^13CNMR化学位移模型，结果表明，烷烃^13CNMR化学位移(CS)可用下式来定量描述：CS=194.6156-37.7394(INI)+98.6505(ΣPEI)+27.1630(INI/ΣPEI)-652.9106(ΣPEI/INI)+0.7735N^α~H+2.2468N^β~H-0.1742N^γ~H。用上式估算了304个碳原子的化学位移，平均绝对误差仅为0.77δ，标准差0.9860δ，预测值与实验值非常吻合。     

Characterisation of poly(neutral red) modified carbon film electrodes; application as a redox mediator for biosensors

The polymer redox mediator, poly(neutral red) (PNR), has been synthesised and characterised electrochemically to investigate the best electropolymerisation and mediation conditions for application in enzyme biosensors and to clarify the mechanism of action. Neutral red was electropolymerised by potential cycling on carbon film electrode substrates by allowing the monomer to be oxidised during the full 20 cycles of polymerisation or reducing the positive limit of the potential window after the first 2 cycles to impede monomer oxidation with a view to obtaining longer polymer chains and a lesser degree of branching. Comparison was made with glassy carbon substrates. The PNR films on carbon film electrodes were characterised using cyclic voltammetry and electrochemical impedance spectroscopy, as well as in glucose biosensors prepared with PNR. Glucose oxidase enzyme was immobilised by encapsulation in silica sol-gel and compared with that obtained by cross-linking with glutaraldehyde. The biosensors were evaluated by chronoamperometry in 0.1 M phosphate buffer saline solution, pH 7.0, and showed evidence of electron transfer between the enzyme cofactor flavin adenine dinucleotide and PNR dissolved in the enzyme layer competing with PNR-mediated electrochemical degradation of H₂O₂ formed during the enzymatic process. This paper is dedicated to Professor Dr. Algirdas Vaskelis on the occasion of his 70th birthday.     

Structural Characteristics of Xyloglucan – Congo Red Aggregates as Observed by Small Angle X-ray Scattering

Xyloglucan is a type of hemicellulose with a cellulose backbone containing (1→6)-α-xylose or (1→2)-β-galactoxylose as a side chain. It is soluble in water. Its aqueous solution forms a gel or gel-like precipitate by addition of Congo red. Xyloglucan gel structures with various concentrations of Congo red were observed by small angle X-ray scattering (SAXS) at the nano-level. SAXS results indicated that the xyloglucan chains interacted with Congo red, and that an increase of concentration of Congo red induced a characteristic cross-linking domain, which consisted of a flat structure containing stacked xyloglucan chain assemblies. The Congo red molecules are inserted between the xyloglucan chains.