Chromogenic reaction of bromopyrogallol red with tri- and hexavalent chromium in the presence of cetyltrimethyl ammonium bromide and its application in Cr speciation

The coordination reactions of bromopyrogallol red (BPR) with tri- and hexavalent chromium in the presence of cetyltrimethylammonium bromide (CTAB) have been studied by absorption spectrometry. Results show that the reactions of Cr(VI) and Cr(III) with BPR in the absence or presence of CTAB have different temperature dependences. The reaction mechanism of Cr(VI) is that Cr(VI) is first reduced by BPR to Cr(III) and then the Cr(III) produced reacts with BPR. Based on the study on the coordination reactions and the effects of surfactants upon them, a simple, rapid, sensitive and accurate method for Cr speciation has been developed. Over the range of 0–8 g Cr(VI) or 0–12g Cr(III) per 25ml final volume, the calibration curve is linear with a detection limit of 3.5 × 10^–7 mol/1 for Cr(VI) or 4.4 × 10^–7 mol/1 for Cr(III).     

镓(Ⅲ)-茜素红体系的吸附伏安法

本文对镓(Ⅲ)与茜素红络合物在悬汞电极上的吸附伏安法作了研究,确定了电极过程.在HAc-NH_4Ac(pH4.06)缓冲溶液中茜素红存在下,用1.5阶微分吸附伏安法测定镓,其线性范围是1×10~(-10)～1×10~(-7)mol/L,其检测限为1×10~(-10)mol/L,并用此法测定了中草药中的痕量镓.     

Aortic elastin fluorescence afterin vivo labeling with Congo red

Congo red (CR) is an azo dye which not only preferentially binds to elastin, an extracellular matrix protein found in the media of arterial vessel walls, but also fluoresces when it binds to this protein. Protein solubilization data following laser irradiation of elastin:CR suspensions determined that the amount of elastin solubilized by laser irradiation increased with the increase in CR. The saturation point of CR to elastin was attained when 400 g CR was added to 20 mg elastin suspension. When 20 ml of a 5% CR solution in 5% dextrose was administered intravenously, the CR was absorbed in levels sufficient to produce fluorescence of the main arteries in rabbits. Layers of tissue both in the media of the vessels and at the endothelial/intimal interface were clearly differentiated. Therefore, the elastin:CR complex appears to be an ideal system in which the elastin fluorescence could aid in distinguishing between normal and diseased tissue in certain pathological conditions, such as atherosclerosis and some types of breast tumors.     

直接甲醇燃料电池阳极电催化剂

直接甲醇燃料电池作为未来清洁的动力能源，由于具有下列优点：操作温度低(<100℃)、燃料易储存和运输、能量效率高、污染低和燃料启动快而受到人们广泛的关注。阳极电催化剂是直接甲醇燃料电池最重要的组成部分。本文综述了近三年来直接甲醇燃料电池阳极电催化剂最新的研究进展，主要对催化剂制备方法、新型碳载体材料、催化剂类型作了详细的评述，展望了未来甲醇电催化氧化催化剂的发展，指出了电催化剂面临的问题。     

Purification and Characterization of DNA Methylase From HL-60 Cells

A solid leukemia sarcoma has been successfully developed after subcutaneous inoculation of the cultured human promyelocytic leukemia cells (HL-60 cells) into unde mice. The solid leukemia sarcoma is a more plantiful source than the cultured cells for enzymatic study and its growing environment is closer to that of the human body than the cultured cells.We establish an efficient procedure of purifying HL-60 cells DNA methylase which includes: disruption of HL-60 cells by homogenization and sonication, removing the cell fragments and cellular particles by centrifuge and ultracentrifuge (105.000 g); removing endogenous DNA by streptomycin sulfate, salting out by (NH4)2SO4, ion exchange chromatography on DEAE-cellulose (DE-52), gel filtration over Sephadex G-100 column.The DNA methylase from HL-60 cells has been purified 204 fold by this procedure. The purified enzyme shows a single-band on PG-PAGE. A 479-kD molecular weight of this enzyme is measured by PG-PAGE. The enzyme properties of HL-60 DNA methylase     

Production and energetic use of biogas from energy crops and wastes in Germany

The production of biogas for reducing fossil CO₂ emissions is one of the key strategic issues of the German government and has resulted in the development of new process techniques and new technologies for the energetic use of biogas. Progress has been made in cultivating energy crops for biogas production, in using new reactor systems for anaerobic digestion, and in applying more efficient technologies for combined heat and power production. Recently, integration of fuel cells within the anaerobic digestion process was started, and new technologies for biogas upgrading and conversion to hydrogen were tested. This article describes the trends in Germany for achieving more efficient energy production.     

Revisiting catechol derivatives as robust chromogenic hydrogen donors working in alkaline media for peroxidase mimetics

Colloidal noble metal-based nanoparticles are able to catalyze oxidation of chromogenic substrates by H₂O_2, similarly to peroxidases, even in basic media. However, lack of robust chromogens, which work in high pH impedes their real applications. Herein we demonstrate the applicability of selected catechol derivatives: bromopyrogallol red (BPR) and pyrogallol (PG) as chromogenic substrates for peroxidase-like activity assays, which are capable of working over wide range of pH, covering also basic values. Hyperbranched polyglycidol-stabilized gold nanoparticles (HBPG@AuNPs) were used as model enzyme mimetics. Efficiency of several methods of improving stability of substrates in alkaline media by means of selective suppression of their autoxidation by molecular oxygen was evaluated. In a framework of presented studies the impact of borate anion, applied as complexing agent for PG and BPR, on their stability and reactivity towards oxidation mediated by catalytic AuNPs was investigated. The key role of high concentration of hydrogen peroxide in elimination of non-catalytic oxidation of PG and improvement of optical properties of BPR in alkaline media containing borate was underlined. Described methods of peroxidase-like activity characterization with the use of BPR and PG can become universal tools for characterization of nanozymes, which gain various applications, among others, they are used as catalytic labels in bioassays and biosensors.     

Photovoltaic polymers based on difluoroqinoxaline units with deep HOMO levels

We report the synthesis of low bandgap polymers with a difluoroquinoxaline unit by Stille polymerization for use in polymer solar cells (PSCs). A new series of copolymers with 2,3‐didodecyl‐6,7‐difluoro quinoxaline as the electron‐deficient unit and alkyloxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophene as the electron‐rich unit were synthesized. The photovoltaic properties of the devices based on the synthesized polymers revealed that the fluorine atoms at the quinoxaline units aid in decreasing the highest occupied molecular orbital (HOMO) energy levels; this in turn increased the open circuit voltage of the devices. The polymers with long alkyl chains exhibited good solubility that increased their molecular weight, but the power conversion efficiency was low. Efficient polymer solar cells were fabricated by blending the synthesized copolymers with PC₇₁BM, and the PCE increased up to 5.11% under 100 mW cm⁻² AM 1.5 illumination. These results demonstrate that the importance of having a control polymer to be synthesized and characterized side by side with the fluorine analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1489–1497     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988     

Color Bricks: Building Highly Organized and Strongly Absorbing Multicomponent Arrays of Terpyridyl Perylenes on Metal Oxide Surfaces

Terpyridine‐substituted perylenes containing cyclic anhydrides in the peri position were synthesized. The anhydride group served as an anchor for assembly of the terpyridyl‐crowned chromophores as monomolecular layers on metal oxide surfaces. Further coordination with Zn²⁺ ions allowed for layer‐by‐layer formation of supramolecular assemblies of perylene imides on the solid substrates. With properly selected anchor and linker molecules it was possible to build high quality structures of greater than ten successive layers by a simple and straightforward procedure. The prepared films were stable and had a broad spectral coverage and high absorbance. To demonstrate their potential use, the synthesized dyes were employed in solid‐state dye‐sensitized solar cells, and electron injection from the perylene antennas to titanium dioxide was observed.