Fast,Reversible Lithium Storage with a Sulfur/Long‐Chain‐Polysulfide Redox Couple

The cathodic reactions in Li–S batteries can be divided into two steps. Firstly, elemental sulfur is transformed into long‐chain polysulfides (S₈?Li₂S₄), which are highly soluble in the electrolyte. Next, long‐chain polysulfides undergo nucleation reaction and convert into solid‐state Li₂S₂ and Li₂S (Li₂S₄?Li₂S) by slow processes. As a result, the second‐step of the electrochemical reaction hinders the high‐rate application of Li–S batteries. In this report, the kinetics of the sulfur/long‐chain‐polysulfide redox couple (theoretical capacity=419 mA h g^?1) are experimentally demonstrated to be very fast in the Li–S system. A Li–S cell with a blended carbon interlayer retains excellent cycle stability and possesses a high percentage of active material utilization over 250 cycles at high C rates. The meso‐/micropores in the interlayer are responsible for accommodating the shuttling polysulfides and offering sufficient electrolyte accessibility. Therefore, utilizing the sulfur/long‐chain polysulfide redox couple with an efficient interlayer configuration in Li–S batteries may be a promising choice for high‐power applications.     

Recent Advances in Aerosol‐Assisted Spray Processes for the Design and Fabrication of Nanostructured Metal Chalcogenides for Sodium‐Ion Batteries

Increasing demand for sodium‐ion batteries (SIBs), one of the most feasible alternatives to lithium ion batteries (LIBs), has resulted because of their high energy density, low cost, and excellent cycling stability. Consequently, the design and fabrication of suitable electrode materials that govern the overall performance of SIBs are important. Aerosol‐assisted spray processes have gained recent prominence as feasible, scalable, and cost‐effective methods for preparing electrode materials. Herein, recent advances in aerosol‐assisted spray processes for the fabrication of nanostructured metal chalcogenides (e.g., metal sulfides, selenides, and tellurides) for SIBs, with a focus on improving the electrochemical performance of metal chalcogenides, are summarized. Finally, the improvements, limitations, and direction of future research into aerosol‐assisted spray processes for the fabrication of various electrode materials are presented.     

Spatially Self-Confined Formation of Ultrafine NiCoO2 Nanoparticles@Ultralong Amorphous N-Doped Carbon Nanofibers as an Anode towards Efficient Capacitive Li+ Storage

The exploration of anode materials with a high degree of electrochemical utilization for Li-ion batteries (LIBs) still remains a huge challenge despite pioneering breakthroughs. Rational engineering of electrode structures/components by facile strategies would offer infinite possibilities for the development of LIBs. In this study, one-dimensional ultralong nanohybrids of ultrafine NiCoO₂ nanoparticles dispersed in situ in and/or on the surface of amorphous N-doped carbon nanofibers (NCO@ANCNFs) were fabricated by a bottom-up electrospinning protocol. By virtue of synergistic structural/component features, the obtained ultralong NCO@ANCNFs with low NCO loading (≈33.6 wt %) show highly efficient Li⁺ storage performance with high reversible capacity, high rate capability, and long cycle life. The unusual reversible crystalline transformation during cycling was analyzed. Quantitative analysis revealed that the pseudocapacitive contribution mainly accounts for the superior lithium storage of the NCO@ANCNFs. Besides, the ability of the hybrid anode to deliver competitive Li-storage properties even without conductive carbon greatly enhances its commercial applicability. An NCO@ANCNFs//LiNi_0.8Co_0.15Al_0.05O₂ full battery was assembled and exhibited striking electrochemical properties. This contribution offers a scalable methodology to fabricate highly efficient hybrid anodes for advanced next-generation LIBs.     

Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

室温钠离子电池关键材料研究进展

钠离子电池凭借钠资源丰富、价格低廉在大规模储能领域有着重要应用前景. 然而,钠离子相对锂离子较大的半径和质量限制了它在电极材料中的可逆脱嵌,导致其电化学性能不佳. 因此研发稳定、高效储钠的高比能电极材料是钠离子电池实用化的关键. 另外,进一步优化与电极材料相匹配的电解质来实现高安全、长寿命钠离子电池的构建,推动其商业化进程,也是迫切需要解决的问题. 本文主要对室温钠离子电池关键材料（包括正极、负极和电解质材料）的研究进展进行简要综述,并探讨了其面临的困难及可行的解决方案,为钠离子电池的发展提供一定参考依据.     

锂镍钴复合氧化物锂离子电池正极材料的研究

本文报道了以碱式碳酸镍、碱式碳酸钴和碳酸锂为原料 ,柠檬酸为络合剂的新溶胶凝胶法制备复合锂镍钴氧化物锂离子电池正极材料 .氧气流中制备的LiNi0 .8Co0 .2 O2 具有高的循环容量 (～ 190mAhg 1)     

Effect of Dy3+‐doping on Electrochemical Properties of LiFePO4/C Cathode for Lithium‐Ion Batteries

Dy doping and carbon coating are adopted to synthesize a LiFePO₄ cathode material in a simple solution environment. The samples were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Their electrochemical properties were investigated by cyclic voltammetry (CV) and galvanostatic charge‐discharge tests. An initial discharge capacity of 153 mAh/g was achieved for the LiDy_0.02Fe_0.98PO₄/C composite cathode with a rate of 0.1 C. In addition the electronic conductivity of Dy doped LiFePO₄/C was enhanced to 1.9 × 10^?2 Scm^?1. The results suggest that the improvement of the electrochemical properties are attributed to the dysprosium doping and carbon coating which facilitates the phase transformation between triphylite and heterosite during cycling. XRD data indicate that doping did not destroy the lattice structure of LiFePO₄. To evaluate the effect of Dy substitution, cyclic voltammetry was used at room temperature. prepared. From Cv measurement a more symmetric curve with smaller interval between the cathodic and anodic peak current was obtained by Dy substitution. This denoted a decreasing of polarization with Dy substitution, which illustrated an enhancement of electrochemical performances.     

稀土掺杂对锂离子电池正极材料LiMn2O4结构及电性能的影响

利用微波加热技术合成稀土掺杂基锂离子电池正极材料LiMn2-xRExO4(RE=Y，Nd，Gd，Ce)，通过XRD、循环伏安及恒电漉充放电测试研究了稀土掺杂离子对合成正极材料结构及电化学性能的影响。XRD测试结果表明，合适的掺杂量可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用，稀土离子的引入可以部分取代原有的三价锰离子，由于稀土离子的离子半径较三价锰离子大，因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大，在一定程度上扩充了锂离子迁移的三维通道，更有利于锂离子的嵌入与脱嵌；循环伏安及恒电漉充放电测试结果表明稀土掺杂有效提高了LiMn2O4材料的电化学循环可逆性及循环稳定性。