Guided surface modes in a hollow slab waveguide with a left-handed material substrate or cover

The structural dispersion characteristics of guided surface modes in a hollow slab waveguide with a left-handed material substrate or cover are investigated. Dispersion relation is derived by using normalized parameters, and universal dispersion curves have been obtained analytically, by solving transcendental dispersion equations in a reverse way. Existence condition, mode degeneracy and other dispersion properties of guided surface modes have been discussed for different ? or μ of three layers for this substrate or cover layer.     

Mode Distribution and Bandwidth Characteristic of Arbitrarily Trapezoidal-Groove Guide for Millimeter Waves

The modes TE and TM of arbitrarily trapezoidal-groove guide are analyzed by using the mode-matching method. The mode TE₁₁ is the dominant mode of the trapezoidal-groove guide under different conditions. The bandwidth characteristic and the operation condition for the single dominant mode are discussed. The obtained conclusions are of very important significance in theoretical study and practical application of trapeziodal-groove guides for millimeter waves.     

Adsorption and desorption characteristics of barium oxide at high temperature

Oxygen-selective adsorbents were prepared by two different methods, hydrothermal and sol-gel methods. The adsorption and desorption characteristics of these adsorbents were compared in terms of stability and sorption capacity. The sorbents prepared by the sol-gel method showed better cyclic stability and higher adsorption capacity than that prepared by the hydrothermal method because the sol-gel method entrapped well the barium peroxide.Relaxation time for adsorption ranged from 4 to 9 min depending on the preparation methods and that for desorption was 6 min regardless of the preparation methods. Breakthrough experiment with the sorbent prepared by the sol-gel method was performed. The adsorption breakthrough curves at 600 °C showed two plateau regions. One was at about 3.5%, and the other was 20%. The first plateau region is related to the sharp transition point of the oxygen adsorption isotherm. Though the relaxation time for adsorption was 6 min, the time required from the end of the first plateau to the beginning of the second plateau was just 2 min. During the desorption, a plateau region at 3.5% of oxygen concentration was observed regardless of the desorption flow rate.     

广义特征坐标系计算膨胀波与激波优越性的数值验证

最近提出的以流体速度和声速的线性组合为速度而运动的广义特征坐标系,是-个更为-般的坐标系统,当参数取不同特殊值的时候,就可以得到其他经典的坐标系统.这种坐标系的最大特点是,它能跟随膨胀波(当然也可以跟随激波和接触间断)运动,从而在使用同-计算格式的前提下,使得膨胀波的计算精度更高.对膨胀波和激波进行数值试验,结果显示广义特征坐标系在计算膨胀波和激波时明显优于传统的坐标系.     

基于继电特性函数的互联电力系统混沌控制

电力系统中的混沌振荡对整个互联电网具有极大危害.本文利用Lyapunov指数、分岔图、相平面图和功率谱等分析一个简单互联电力系统的动力学行为,研究电力系统对电磁功率扰动幅值的敏感性.同时,提出一种基于继电特性函数的准滑动模态控制方法,对系统进行混沌振荡抑制,使系统快速平滑地到达控制目标.实验表明,该方法不仅能够缩短控制时间,减少因参数过大带来的系统冲击,而且对高频抖动也有很好的抑制作用,具有较强的鲁棒性.     

Performance enhanced down-stream signalling for next generation long-reach 10 Gbit/s passive optical networks

In this paper, we have analyzed the signal processing methods both in digital and optical domain to enhance the transmission performance of downstream signalling in long reach passive optical networks (LR-PONs). The impact of non-linear (NL) equalization through signal processing, i.e. Volterra Equalization (VE), Digital Backpropagation (BP) and Optical Phase Conjugation with Non-linearity Module (OPC-NM) is investigated, in 10 Gbit/s (XG) DP-QPSK long-reach wavelength division multiplexed (WDM) PONs without midspan repeaters over 120 km standard single mode fibre (SMF) link for down-stream signals. Due to the compensation of optical Kerr effects, the sensitivity penalty is reduced to 2 dB by BP algorithm, 1.5 dB by VE algorithm and 2.69 dB by OPC-NM. Moreover, with the implementation of NL equalization technique we are able to get the transmission distance of 126.6 km SMF for the 1:1024 split-ratio at 5 GHz channel spacing in the non-linear region. Furthermore, the concept of super passive optical network (S-PON) is also evaluated, which involves a repeater stage consisting of optical amplifiers, to study the feasibility for receiver side signal processing and simplification.     

彩色负片印片颗粒指数的准确测定

分析了彩色负片印片颗粒指数σper实际测试中不同性能负片的测试特点和影响因素。印片颗粒指数的测试点应根据彩色负片的感光特性确定,为正常扩印时对应正片0．74中灰密度的负片密度点。影响印片颗粒指数值的两个主要因素是彩色相纸的反差修正系数α和彩色负片的覆盖力系数ECP;建立了α和ECP的实验求取方法,并通过对几种负片参量的实际测定,分析和说明了参量变化对印片颗粒指数数值的影响程度和应进行的修正。     

Phase-matched high-order harmonics by interaction of Ar atoms with high-repetition-rate low-energy femtosecond laser pulses

High-order harmonics are generated by coherent interaction of an intense laser and atoms or molecules[1]. With the development of the intense ultrashort pulse laser, the research of high-order harmonic generation has reached the water-window in spectral region[2] and subfemtosecond in time domain[3]. Especially, the generation and application of subfemtosecond pulse led the study of high-order harmonic generation into a completely new world[4, 5]. It has made the study of ultrafast science fro…     

纳米铜团簇在常温和升温过程中能量特征的分子动力学研究

采用分子动力学方法和F-S多体势函数，模拟研究纳米铜团簇常温下能量特征及其在升温直到熔化过程中的变化，确定了常温下纳米铜团簇的表面原子厚度和表面能，给出在不同温度下纳米铜团簇能量大小分布比例和能量的概率密度，细致描述了团簇升温过程团簇内部原子和表面原子之间不同的变化特征. 关键词： 铜团簇 分子动力学 能量特征 温度     

分辨率对大气中痕量污染气体的DOAS测量性能影响研究

在差分吸收光谱(DOAS)测量过程中,光谱分辨率的选择直接决定了污染气体浓度的测量准确度.主要研究了光谱分辨率对污染气体被榆测到的特征吸收结构形状的影响,以及差分吸收截面随分辨率的变化趋势,从而确定了光谱分辨率对污染气体最低可检测浓度的影响,通过研究分辨率与光强的关系,确定了分辨率与信噪比(S/N)的函数关系式,得出了DOAS测量NO2,O3,和SO2的最佳信噪比范围,对多种污染物标准气体进行了同时监测,计算出标准气体在不同光谱分辨率下的测量误差,确定了对NO2,O3和SO2监测的最适用的分辨率范围.在此分辨率范围既能够实现对痕量气体的准确定性定量测量,又能达到测量所需要的高灵敏度,强选择性和适用的时间分辨率.通过在北京丰台区的实际监测得到了与点式仪器测量结果很好的一致性.