The Identification of Cotton Fibers Dyed with Reactive Dyes for Forensic Purposes

Some of the most common microtraces that are currently collected at crime scenes are fragments of single fibers. The perpetrator leaves them at a crime scene or takes them away, for example, on their clothing or body. In turn, the microscopic dimensions of such traces mean that the perpetrator does not notice them and therefore usually does not take action to remove them. Cotton and polyester fibers dyed by reactive and dispersion dyes, respectively, are very popular within clothing products, and they are hidden among microtraces at the scene of a crime. In our recently published review paper, we summarized the possibilities for the identification of disperse dyes of polyester fibers for forensic purposes. In this review, we are concerned with cotton fibers dyed with reactive dyes. Cotton fibers are natural ones that cannot easily be distinguished on the basis of morphological features. Consequently, their color and consequently the dye composition are often their only characteristics. The presented methods for the identification of reactive dyes could be very interesting not only for forensic laboratories, but also for scientists working in food, cosmetics or pharmaceutical/medical sciences.     

Air‐Stable Oxyallyl Patterns and a Switchable N‐Heterocyclic Carbene

Oxyallyl derivatives are typically elusive compounds. Even recently reported “stabilized” 1,3‐diaminooxyallyl species are still highly reactive and have short lifetimes at room temperature. Herein, we report the synthesis and preliminary study of mesoionic pyrimidine derivatives that feature 1,3‐bis(dimethylamino)oxyallyl patterns with an unprecedented level of stabilization. The latter are not only insensitive towards air and moisture, but they are also compatible with the formation of an ancillary stable N‐heterocyclic carbene moiety. As the oxyallyl pattern is proton‐responsive, it allows the reversible switching of the electronic properties of the carbene, as a ligand.     

Equilibrium Formation of Stable All‐Silicon Versions of 1,3‐Cyclobutanediyl

Main group analogues of cyclobutane‐1,3‐diyls are fascinating due to their unique reactivity and electronic properties. So far only heteronuclear examples have been isolated. Here we report the isolation and characterization of all‐silicon 1,3‐cyclobutanediyls as stable closed‐shell singlet species from the reversible reactions of cyclotrisilene c‐Si₃Tip₄ (Tip=2,4,6‐triisopropylphenyl) with the N‐heterocyclic silylenes c‐[(CR₂CH₂)(NtBu)₂]Si: (R=H or methyl) with saturated backbones. At elevated temperatures, tetrasilacyclobutenes are obtained from these equilibrium mixtures. The corresponding reaction with the unsaturated N‐heterocyclic silylene c‐(CH)₂(NtBu)₂Si: proceeds directly to the corresponding tetrasilacyclobutene without detection of the assumed 1,3‐cyclobutanediyl intermediate.     

Coupling a Wireless Bipolar Ultramicroelectrode with Nano‐electrospray Ionization Mass Spectrometry: Insights into the Ultrafast Initial Step of Electrochemical Reactions

We report a new mass spectrometric method for detecting electrogenerated intermediates. This approach is based on simultaneous activation of electrospray ionization and redox reaction on a wireless bipolar ultramicroelectrode, which is fabricated in the tip of a quartz nanopipette. The hollow structure of the ultramicroelectrode permits rapid transferring the transient species from electrode–electrolyte interfaces into the gas phase for mass spectrometric identification on the time scale of microseconds. The long‐sought fleeting intermediates including TPrA^.+, whose lifetime in solution is only 200 μs, and catecholamine o‐semiquinone radicals, the second‐order rate constant of which is typically 10⁹ m ^?1 s^?1, were successfully identified, helping clarify the previously hidden reaction pathways. Accordingly, our method may have wide applicability in exploring the dynamics of many electrochemical reactions, especially their ultrafast initial steps.     

Chemical profiling and marker characterization of Huangqin decoction prepared with three types of peony root by liquid chromatography with electrospray ionization mass spectrometry

Clarification of the quality and biological effect equivalence of traditional Chinese medicines containing multi‐origin species is essential to improve their current quality standards, and also is the core problem to clarify the origins of single herbs with multi‐species in Chinese formulas that will guarantee their clinical application. Huangqin decoction is the typical one of multi‐origin formulas frequently used in traditional Chinese medicine and Kampo medicine. An ultra high performance liquid chromatography with electrospray ionization–tandem mass spectrometry was developed for chemical profiling and marker quantification of Huangqin decoction prepared with two different original types of peony root, white and red peony root. Forty‐seven main peaks in chemical profiling of Huangqin decoction prepared with white and red peony root were identified: nine were from peony root, 20 from baical skullcap root, 17 from licorice root, and one from jujubae fruit. The markers characteristics of the respective types of peony root in Huangqin decoction differ from that in single herbs, especially in terms of monoterpenoids and hydrolysable tannins. Subsequently, 17 representative markers in Huangqin decoction prepared with three types of peony root and their chemical characteristics and content distribution were carried out.     

Optimization and detailed stability study on Pb doped ceria nanocubes for enhanced photodegradation of several anionic and cationic organic pollutants

A series of Pb doped CeO₂ nanocubes with seven different Pb loadings (2–12 mol%) were synthesized via modified hydrothermal technique. The prepared samples were characterized by XRD, XPS, FT-IR, TGA, SEM, HR-TEM, EDS and UV–Vis DRS analysis. According to XRD analysis, the crystalline structure of synthesized pure CeO₂ and Pb-doped CeO₂ samples are cubic structure. The ceria nanocubes showed an increase in amount of oxygen vacancies with increasing the dopant concentrations. When the doping level of Pb is 6 mol%, the optical band gap of Pb-CeO₂ is smaller than that of pure CeO₂ nanocubes. The HR-TEM results confirms the cubic structure of 6% Pb-CeO₂ with average crystallite size of about 15 nm. The photocatalytic ability of Pb-CeO₂ catalysts were studied by degrading several anionic and cationic organic pollutants like methylene blue (MB), methylene orange (MO), methylene red (MR), rhodamine B (RhB), reactive blue 160 (RB160), salicylic acid (SA), coumarin and phenol. The 6% Pb-CeO₂ nanocubes shows better photocatalytic performance against anionic dyes especially for MB. To find the optimum condition for better photocatalytic performance of 6% Pb-CeO₂ nanocubes, the photocatalytic process was conducted in different initial reaction conditions like reaction temperature, catalytic dosage, dye concentration and pH of the reaction solution. The stability and recyclability of 6% Pb-CeO₂ photocatalyst was studied by XRD, FT-IR and EDS analysis after 5 cycles of MB degradation. The hydroxyl radical estimation and trapping experiments were conducted to observe the photocatalytic mechanism process in 6% Pb-CeO₂ nanocubes. The perfect doping concentration for better organic pollutant degradation by Pb-CeO₂ is found to be 6 mol% of Pb.     

Reactive polymers incorporating silyl enol ether groups. I. synthesis by radical polymerization of 2-(trimethylsiloxy)-butadiene and 2-(tert)-butyldimethylsiloxy butadiene

2-(Trimethylsiloxy)butadiene (TMSBD) and 2-(tert-butyldimethylsiloxy)butadiene (TBMSBD) were copolymerized with styrene (St) and methyl methacrylate (MMA) under free-radical conditions. The obtained polymers were found to contain reactive silyl enol ether groups in a ratio identical to the TMSBD or TBMSBD molar fraction in the copolymer. All investigated samples displayed only 1,4- and 3,4-microstructures. The influence of several experimental factors on the yields, rates of polymerization, microstructures, and copolymer compositions were examined. Monomer reactivity ratios r₁ and r₂ at 60°C were determined from copolymer composition curves at low conversions. The homopolymerization of TBMSBD was also investigated and results were compared with those previously obtained for TMSBD. A slight increase in rates was observed and was rationalized on the basis of the higher viscosity resulting from the structural change in the monomer. Thermal stabilities of the synthesized polymers were investigated by TGA and their glass transition temperatures were determined by DSC. All measurements are compatible with a possible use of TMSBD and TBMSBD copolymers as reactive polymers. © 1996 John Wiley & Sons, Inc.     

Capillary zone electrophoresis with UV-scanning detection for the analysis of metal species and their organic binding partners in biological systems

A capillary zone electrophoretic method with UV-scanning detection for the separation and identification of both free ligands and metal species is presented. The electrophoretic behavior of naturally occurring binding partners such as organic acids and amino acids was studied and compared with their metal-complexes. Copper(II) complexes of citrate and amino acids showed decreased electrophoretic mobilities and altered UV spectra. The optimized method was validated on ultrafiltered cow's milk and human milk samples. In cow's milk six low molecular weight substances, including citrate, orotate, and hippurate, could be separated. Metal supplementation with Cu(II), Ni(II), or Zn(II) decreased not only the citrate peak but also the orotate signal and in the case of copper(II) supplementation a new signal for the copper(II)-citrate complex appeared. In human milk samples various amino acids such as glutamate, phenylalanine, tyrosine, and tryptophan could be identified besides citrate. The electrophoretic mobilites and peak areas of the amino acids were also influenced by the metal supplementation.     

In Vitro Evaluation of the Photoreactivity and Phototoxicity of Natural Polyphenol Antioxidants

Polyphenols are a large family of natural compounds widely used in cosmetic products due to their antioxidant and anti-inflammatory beneficial properties and their ability to prevent UV radiation-induced oxidative stress. Since these compounds present chromophores and are applied directly to the skin, they can react with sunlight and exert phototoxic effects. The available scientific information on the phototoxic potential of these natural compounds is scarce, and thus the aim of this study was to evaluate the photoreactivity and phototoxicity of five phenolic antioxidants with documented use in cosmetic products. A standard ROS assay was validated and applied to screen the photoreactivity of the natural phenolic antioxidants caffeic acid, ferulic acid, p-coumaric acid, 3,4-dihydroxyphenylacetic acid (DOPAC), and rutin. The phototoxicity potential was determined by using a human keratinocyte cell line (HaCaT), based on the 3T3 Neutral Red Uptake phototoxicity test. Although all studied phenolic antioxidants absorbed UV/Vis radiation in the range of 290 to 700 nm, only DOPAC was able to generate singlet oxygen. The generation of reactive oxygen species is an early-stage chemical reaction as part of the phototoxicity mechanism. Yet, none of the studied compounds decreased the viability of keratinocytes after irradiation, leading to the conclusion that they do not have phototoxic potential. The data obtained with this work suggests that these compounds are safe when incorporated in cosmetic products.     

反应性乳化剂存在下的五元苯丙乳液共聚合

采用反应性乳化剂SE-10N,通过正交实验及单因素实验确定了以苯乙烯、甲基丙烯酸甲酯、丙烯酸丁酯、丙烯酸和丙烯腈为单体的五元无皂苯丙共聚乳液的组成及聚合工艺。所制得的无皂乳液稳定,其乳胶粒大小均匀,粒径为50~60nm,比同组成的有皂乳液乳胶粒的粒径稍小。乳液涂膜透明、硬度达H级;其硬度、耐水性及钙离子稳定性均较同组成有皂乳液的好。