Computational modelling of multi-material energetic materials and systems

ABSTRACT

In this paper, we present a systematic roadmap for developing a robust and parallel multi-material reactive hydrodynamic solver that integrates historically stable algorithms with new and current modern methods to solve explosive system design problems. The Ghost Fluid Method and Riemann solvers were used to enforce appropriate interface boundary conditions. Improved performance in terms of computational work and convergence properties was achieved by modifying a local node sorting strategy that decouples ghost nodes, allowing us to set material boundary conditions via an explicit procedure, removing the need to solve a coupled system of equations numerically. The locality and explicit nature of the node sorting concept allows for greater levels of parallelism and lower computational cost when populating ghost nodes. Non-linear numerical issues endemic to the use of real Equations of State in hydro-codes were resolved by using more thermodynamically consistent forms allowing us to accurately resolve large density gradients associated with high energy detonation problems at material interfaces. Pre-computed volume tables were implemented adding to the robustness of the solver base.     

ZnFe2O4/Ag/TiO2复合材料的制备及其光催化性能

以硝酸银、钛酸四丁酯、无水氯化锌、六水氯化铁为原料,采用溶胶-凝胶法与溶剂热相结合的方法制备了ZnFe₂O₄/Ag/TiO₂复合材料,通过扫描电子显微镜、能谱分析仪、X射线粉末衍射仪、X射线光电子能谱仪、振动样品磁强计、紫外可见分光光度计对样品进行表征及测试。结果表明： ZnFe₂O₄/Ag/TiO₂-10具有最佳的光催化效果,在紫外和可见光下对染料的降解率都能达到90%以上,具有优异的紫外可见光光催化活性。ZnFe₂O₄/Ag/TiO₂具有独特的磁性,能在外部磁场作用下进行回收利用,这使其在实际应用中成为可能。通过磁分离技术重复回收利用5次后仍然保持优良的光催化性能,说明ZnFe₂O₄/Ag/TiO₂-10具有优异的磁性及较高的光催化循环稳定性。     

Direct Esterification of Carboxylic Acids with Alcohols Catalyzed by Iron(III) Acetylacetonate Complex

Direct condensation of carboxylic acids and alcohols with electronic, steric, and functional group variations was carried out using the environmentally benign, moisture-stable, inexpensive, and recoverable iron(III) acetylacetonate [Fe(acac)₃] as catalyst (5 mol%). This iron salt efficiently catalyzed the esterification of several primary and secondary alcohols in refluxing xylene, without the need for a dehydration reagent. The chemoselectivity of the proposed protocol was demonstrated by the selective esterification of primary alcohol functionality in racemic 1-phenylethane-1,2-diol with benzoic acid. The esterification was also applicable to unmasked α -hydroxyacid, guasiaromatic, heterocyclic, and N-protected amino acids.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

Solution-processed bilayer photovoltaic devices with nematic liquid crystals

The cross-linking of polymerisable liquid crystalline semiconductors is a promising approach to solution-processable, multilayer, organic photovoltaics. Here we demonstrate an organic bilayer photovoltaic with an insoluble electron-donating layer formed by cross-linking a nematic reactive mesogen. We investigate a range of perylene diimide (PDI) materials, some of which are liquid crystalline, as the overlying electron acceptor layer. We find that carrier mobility of the acceptor materials is enhanced by liquid crystallinity and that mobility limits the performance of photovoltaic devices.     

Reactivity Studies of Iridium Pyridylidenes [TpMe2Ir(C6H5)2(C(CH)3C(R)NH] (R=H,Me, Ph)

The reactivity of a series of iridium? pyridylidene complexes with the formula [Tp^Me2Ir(C₆H₅)₂(C(CH)₃C(R)N H] ( 1 a – 1 c ) towards a variety of substrates, from small molecules, such as H₂, O₂, carbon oxides, and formaldehyde, to alkenes and alkynes, is described. Most of the observed reactivity is best explained by invoking 16 e^? unsaturated [Tp^Me2Ir(phenyl)(pyridyl)] intermediates, which behave as internal frustrated Lewis pairs (FLPs). H₂ is heterolytically split to give hydride? pyridylidene complexes, whilst CO, CO₂, and H₂C?O provide carbonyl, carbonate, and alkoxide species, respectively. Ethylene and propene form five‐membered metallacycles with an IrCH₂CH(R)N (R=H, Me) motif, whereas, in contrast, acetylene affords four‐membered iridacycles with the IrC(?CH₂)N moiety. C₆H₅(C?O)H and C₆H₅C?CH react with formation of Ir? C₆H₅ and Ir? C?CPh bonds and the concomitant elimination of a molecule of pyridine and benzene, respectively. Finally the reactivity of compounds 1 a – 1 c against O₂ is described. Density functional theory calculations that provide theoretical support for these experimental observations are also reported.     

A Rapid and Efficient Way to Dynamic Creation of Cross‐Reactive Sensor Arrays Based on Ionic Liquids

Based on the simple counterion exchange of ionic liquids, a rapid, facile, and efficient strategy to create a cross‐reactive sensor array with a dynamic tunable feature was developed, and exemplified by the construction of a sensor array for the identification and classification of nitroaromatics and explosives mimics. To achieve a good sensing system with fast response, good sensitivity, and low detection limit, the synthesized ionic liquid receptors were tethered onto a silica matrix with a macro‐mesoporous hierarchical structure. Through the facile anion exchange approach, abundant ionic‐liquid‐based individual receptors with diversiform properties, such as different micro‐environments, diverse molecular interactions, and distinctive physico‐chemical properties, were easily and quickly synthesized to generate a distinct fingerprint of explosives for pattern recognition. The reversible anion exchange ability further endowed the sensor array with a dynamic tunable feature as well as good controllability and practicality for real‐world application. With the assistance of statistical analysis, such as principal component analysis (PCA) and linear discrimination analysis (LDA), an optimized‐size array with a good resolution was rationally established from a large number of IL‐based receptors. The performed experiments suggested that the ionic‐liquid‐based sensing protocol is a general and powerful strategy for creating a cross‐reactive sensor array that could find a wide range of applications for sensing various analytes or complex mixtures.     

Ca(Ⅱ)、Mg(Ⅱ)和Zn(Ⅱ)与丙二醇-水混合体系中L-多巴的二元配合物的生成平衡

在303 K恒温条件下,以NaCl为电解质保持离子强度为0.16 mol·L^-1,用pH滴定法研究了M(Ⅱ)-Dopa(多巴)二元配合物在0～60%(V/V)的丙二醇(PG)-水体系中的生成平衡。在PG-水体系中,Ca(Ⅱ)和Mg(Ⅱ)的典型配合物为MLH,ML₂,ML₂H和ML₂H₂,而Zn(Ⅱ)的典型配合物为ML,MLH,ML₂,ML₂H和ML₂H₂。根据静电和非静电力解释了稳定常数随介质的介电常数而变化的倾向。还讨论了在不同组成的丙二醇(PG)-水体系中配合物物种随pH值变化的情况。     

Electrochemical derivatization‐capillary electrophoresis‐contactless conductivity detection: A versatile strategy for simultaneous determination of cationic,anionic, and neutral analytes

The simultaneous determination of cationic, anionic, and neutral analytes in a real sample was demonstrated by coupling electrochemical (EC) derivatization with counter‐EOF CE‐C⁴D. An EC flow cell was used to oxidize alcohols from an antiseptic mouthwash sample into carboxylic acids at a platinum electrode in acid medium. The carboxylates formed in the derivatization process and other sample ingredients, such as benzoate, saccharinate, and sodium ions, were separated in counter‐flow mode and detected in one run in Tris‐HCl buffer, pH 8.6. Fewer than 5 min were needed to complete each analysis with the automated flow system comprising solenoid pumps for the management of solutions. Insights into the electrochemistry of benzoic acid, present in the sample matrix, were also gained by EC‐CE‐C⁴D; more specifically, by applying potentials higher than 1.47 V to the platinum electrode, some formiate and minute amounts of salicylate were detected.     

2DE‐based approach for estimation of number of protein species in a cell

Insufficient sensitivity of methods for detection of proteins at a single molecule level does not yet allow obtaining the whole image of human proteome. But to go further, we need at least to know the proteome size, or how many different protein species compose this proteome. This is the task that could be at least partially realized by the method described in this article. The approach used in our study is based on detection of protein spots in 2DE after staining by protein dyes with various sensitivities. As the different protein spots contain different protein species, counting the spots opens a way for estimation of number of protein species. The function representing the dependence of the number of protein spots on sensitivity or LOD of protein dyes was generated. And extrapolation of this function curve to theoretical point of the maximum sensitivity (detection of a single smallest polypeptide) allowed to counting the number of different molecules (polypeptide species) at the concentration level of a single polypeptide per proteome. Using this approach, it was estimated that the minimal numbers of protein species for model objects, Escherichia coli and Pirococcus furiosus, are 6200 and 3400, respectively. We expect a single human cell (HepG2) to contain minimum 70 000 protein species.