Polystyrene prepared by reactive extrusion: kinetics and effect of processing parameters

The conversion and residence time were investigated during the bulk polymerization of styrene in a twin screw extruder. It was found that polymerization mainly occurred in the zone between 400 and 1000 mm along the screw axis in the extruder, corresponding to the residence time of the reactants ranging from 1 to 4 min in the extruder. Furthermore, the processing conditions (feed rate, screw rotation rate) and average molecular weight of the polymer have a great effect on the residence time. Based on dimensionless analysis, a model of the residence time has been built‐up, which has been confirmed by the results of realistic measurements. A kinetic model of the polymerization has also been established under the assumption that the screw extruder can be regarded as an ideal plug flow reactor. Copyright © 2004 John Wiley & Sons, Ltd.     

The Menshutkin Reaction in the Gas Phase and in Aqueous Solution: A Valence Bond Study

The recently developed (L. Song, W. Wu, Q. Zhang, S. Shaik, J. Phys. Chem. A 2004 , 108, 6017–6024) valence bond method coupled to a polarized continuum model (VBPCM) is applied to the Menshutkin reaction, NH₃+CH₃Cl→CH₃NH₃⁺+Cl^?, in the gas phase and in aqueous solution. The computed barriers and reaction energies at the level of the breathing orbital VB method (P. C. Hiberty, J. P. Flament, E. Noizet, Chem. Phys. Lett. 1992 , 189, 259), BOVB and VBPCM//BOVB, are comparable to CCSD(T) and CCSD(T)//PCM results and to experimental values in solution. The gas‐phase reaction is endothermic and leads to an ion‐pair complex via a late transition state. By contrast, the reaction in the aqueous phase is exothermic and leads to separate solvated ions as reaction products, via an early transition state. The VB calculations provide also the reactivity parameters needed to apply the valence bond state correlation diagram method, VBSCD (S. Shaik, A. Shurki, Angew. Chem. Int. Ed. 1999 , 38, 586). It is shown that the reactivity parameters along with their semiempirical derivations provide together a satisfactory qualitative and quantitative account of the barriers.     

HIPS／PP熔融反应共混及其动态力学性质

研究了高抗冲聚苯乙烯（HIPS）／聚丙烯（PP）共混物在过氧化二异丙苯（DCP）存在下的熔融反应过程及其动态力学性质．HIPS在DCP存在下以聚苯乙烯（PS）的降解为主，伴随着聚丁二烯（PB）的交联和接枝，PP在DCP存在下以降解为主，HIPS／PP在DCP存在下以PP同HIPS的反应接枝为主，这种原位生成的增容剂显著地改善了HIPS／PP两组份间的相容性，其分子运动特征较前两者发生明显变化，PS的Tg下降，PB和PP的Tg升高．     

Determination of methylated dibenzothiophenes in environmental sarnples by on-line HPLC-CGC

Concurrent solvent evaporation with a loop-type interface was used for on-line HPLC-CGC in the analysis of methylated dibenzothiophene (DBT) isomers in oil samples. The chromatographic behavior of 20 methyl DBT's was studied by HPLC on an aminopropylsilane DBTA phase and by GC on a selective methyl-phenylsilicone phase. That provided a method for analyzing by GC-flame photometric detection, the individual components of the DBT family, previously picked out of the crude oil matrix by HPLC. The GC oven temperature was shown to be critical during HPLC eluent introduction into the GC pre-column. Too high a temperature induced a severe broadening of early eluted peaks whereas a temperature too close to the boiling point of the liquid at the inlet pressure induced double peaks. Optimized conditions were retained on this basis and may be used for the analysis of other families of polyaromatic hydrocarbons.     

H2O−D2O solvent isotope effect in the volume behavior of some high-charge high-size electrolytes

The apparent molar volumes V of KCl, BaCl₂, K₂SO₄, LaCl₃, Co(en)₃Cl₃ [Tris(ethylenediamine)cobalt(III) chloride], K₃Co(CN)₆, K₃Fe(CN)₆, K₄Fe(CN)₆, and Ba₃[Co(CN)₆]₂ have been determined at 25°C in both light and heavy water. The V values in D₂O are systematically lower and increase more rapidly with salt concentration than the V in H₂O. The volume of transfer from H₂O to D₂O as well as the partial molar volume at infinite dilution in both solvents have also been calculated. These results together with literature values for other electrolytes were used to estimate both of these quantities for D₂O solutions of individual ions. The predictions of ion hydration models and ion-ion interactions are compared with experimental observations.     

溶剂对钯催化的叔丁基乙炔低聚反应化学选择性的调控作用

报道了溶剂对钯催化的叔丁基乙炔低聚反应化学选择性的调控作用. 反应可在苯-正丁醇双组分溶剂体系中顺利进行, 当双组分溶剂体系中苯占优势比例时, 反应发生递次的三分子炔烃顺式插入, 经由顺式s-烯钯中间体生成环三聚产物1,3,5-三叔丁基苯; 而当双组分溶剂中正丁醇组分上升至一定比例, 反应选择性生成(3Z,5Z)-2,2,7,7-四甲基- 3,6-二氯-3,5-辛二烯或(3Z,5Z)-2,2,7,7-四甲基-3,6-二溴-3,5-辛二烯, 这是由于正丁醇可显著加快C—Pd σ键的断裂, 并与叔丁基乙炔、σ-烯钯中间体形成弱氢键作用力, 同时也与Pd(II)和Cu(II)等离子存在配位效应. 在强极性质子溶剂H₂O中, 反应生成偶联双炔: 2,2,7,7-四甲基-3,5-辛二炔. 文中就反应溶剂体系、钯铜催化剂及反应可能机理等分别进行了探讨.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Restricted rotation about partial C,N double bonds

The restricted rotation about the partial C,N double bond in 2-chloro-6-NR₂-pyran-4-ones is discussed in the light of NMR spectroscopic data and theoretical calculations.Ab initio calculations at the HF/6-31G^* level were carried out using a continuum model to take solvent effects into account. The delocalization of-electron density [described by natural bond orbital analysis (NBO)] was applied to determine the degree of conjugation in the ground state (GS) and in the transition state (TS) for the restricted rotation of the compounds studied. The reason for the different barriers to rotation of the NR₂ substituents (pyrrolidino > dimethylamino > morpholidino > piperidino) at the 2-chloro-pyran-4-one ring appears to be the different steric hindrance of the NR₂ substituents in the GS for the restricted rotation.     

铝（Ⅲ）—桑色素—含氧有机溶剂荧光体系的研究

本文系统研究了醇、酮等7种含氧有机溶剂对铝-桑色素络合物荧光反应的溶剂化效应。研究发现,上述有机溶剂对荧光体系均有增敏作用,以乙醇的效果最佳,使络合物的荧光强度增加6倍多。据此,本文建立了测定微量铝的高灵敏度荧光分析方法,线性范围为0～1.0μg/10ml,检测限为1.6×10~(-9)g/ml。用所建立的方法对化学试剂中的微量杂质铝进行了测定,结果令人满意。并对有机溶剂化效应的机理作了探讨。