FT–IR microspectroscopy study of blends of ester functionalized ethylene–propylene copolymer with (vinylidene fluoride-hexafluoropropene) elastomer

An ethylene—propylene (EPR) copolymer functionalized with (1,2-dicarboethoxy)ethyl groups has been blended with a vinylidene fluoride—hexafluropropene elastomer (NML). The existence of intermolecular interactions involving mainly the carbonyl groups of the side chains of the functionalized copolymer and the methylene hydrogens of the fluoroelastomer through hydrogen bonding was shown by means of FT—IR spectroscopy. The structure and composition of some microdomains in the mixture was examined by means of FT—IR microspectroscopy.     

ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

聚乙烯与聚乙烯-乙丙橡胶(聚乙烯-乙丙橡胶-聚乙烯)共混物X-射线衍射谱分析

近年来将因子分析这一多变量统计分析技术成功地用于具有加和性的谱分析中。因子分析法可正确定出混合物中含有的物种(因子)数和各物种的含量(浓度),同时可将各组分的纯光谱由混合物的光谱中分离开。聚乙烯(PE)和乙丙橡胶(EPR)的二、三元嵌段共聚物(PE-EPR、PE-EPR-PE)构成的共混物结构、形态与结晶过程研究已有     

PPC/SBR并用弹性体的配方选择

利用正交法对丁苯橡胶（SBR）／聚丙撑碳酸酯（PPC）共混弹性体进行配方设计，得到了一个具有良好综合性能的配方。并通过方差分析得出PPC含量和马来酸酐（MA）用量是影响弹性体拉伸性能的最显著因素。     

Investigations of precipitates in heat treated AgPd30/CuSn6 layers

The subject of the investigations are precipitation zones, which grew as a result of chemical diffusion in AgPd30/CuSn6 bimetals. These precipitation zones have been characterized by metallography, electron probe microanalysis and x-ray diffraction. The growth of precipitation zones in the plating layer and in the substrate layer in dependence on time have been determined. The use of x-ray diffraction alone for the identification of the precipitates could not supply satisfying results in every case. This problem was solved by the application of electron probe microanalysis using a correction method, which allows the estimation of the chemical composition of small particles.Dedicated to Professor Dr. rer. nat. Dr. h. c. Hubertus Nickel on the occasion of his 65th birthday     

剪切流动对共混物相行为影响的研究进展

介绍了国外８０年代以来开展的剪切流动对聚合物共混物相容性影响的研究概况，并着重介绍了采用最新的二维小角激光散射流变仪和光学显微流变仪对共混物体系在剪切应力作用下相行为的研究结果，反映了该前沿领域的最新进展。     

ATOMIC FORCE MICROSCOPY STUDIES OF POLYCAPROLACTONE RINGED SPHERULITES*

The surface morphology of free-surface PCL ringed spherulites was investigated by using atomic forcemicroscopy. The spherulites were obtained by crystallization of PCL/PVC blends of different compositions. It was found thatthe ringed spherulite exhibited regularly fluctuating rings on its surface. Compared with the bright-dark ring pattern of thespherulite under a polarizing microscope, it was proved that the optical characteristics of the ringed spherulite underpolarizing microscope coincided with its surface characteristics. The bright rings in polarizing micrographs of the spherulite coincided with the convex rings on its surface, while the dark rings coincided with the concave rings.     

Study of the α-relaxation of PVC, EVA and 50/50 EVA70/PVC blend

The dipole dynamics and α-relaxation behaviour of polyvinyl chloride PVC, poly(ethylene-co-vinyl-acetate) EVA₇₀ and blend of them EVA₇₀/PVC have been investigated by differential scanning calorimetry (DSC) and dielectric relaxation spectroscopy (DRS). The differential scanning calorimetry (DSC) thermograms measured on samples show a single glass transition in the analysed temperature range. These three polymers are wholly amorphous and pure PVC and pure EVA₇₀ are miscible in the ratio 1:1. The glass transition temperature T_g decreases significantly with presence of EVA₇₀. Furthermore, the values of apparent activation energies for molecular motions at the α-relaxation and the values of fragility index have also been determined for each sample using Moynihan expression for DSC results and Vogel-Fulcher-Tammann-Hesse (VFTH) form for DRS results. It is shown a large dependence of all the values of these parameters with the content of EVA₇₀. Comparing these three polymers, we found that the more fragile glass forming liquid is the PVC. Fragility decreases drastically with EVA₇₀ content. EVA₇₀ and EVA₇₀/PVC blend exhibit practically the same behaviour. The effect of inter- and intra-molecular interactions on fragility is discussed to explain these variations.     

Mechanical,thermal and morphological properties of poly(ε‐caprolactone)/zein blends

Blends of poly(ε‐caprolactone) (PCL) with zein (PCL/zein) in different proportions (100/0, 75/25, 50/50, 25/75 and 0/100 wt% containing 5 wt% glycerol) were compared based on their mechanical properties (tensile strength, elongation at break, and Young's modulus), and on their thermal properties, the latter determined by thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The morphology of the materials was studied by scanning electron microscopy (SEM). Blends of PCL/zein showed reduced tensile strength and elongation at break, but increased Young's modulus compared to the pure polymers, in agreement with the DMTA and SEM results. These findings indicated that PCL and zein were incompatible. TGA showed that the thermal stability was enhanced by the addition of zein to PCL, whereas SEM showed a poor interfacial interaction between the polymers. Copyright © 2004 John Wiley & Sons, Ltd.